Dual Case Adapters

Moderator: Vendors

User avatar
Hard Yaka
Posts: 1307
Joined: Mon Nov 01, 2004 12:00 pm
Location: Katikati

Dual Case Adapters

Postby Jafa » Thu Apr 02, 2009 11:15 am

Give yourself super low ratios for the ultimate in crawlability!, fitting a Trail-Gear dual case adapter will give double low range 8) and 20 forward gears, a gear for any occasion :D
This dual case adapter has greatly increased oiling flow in and around the adapter for cooler operation. We have increased the strength of the casting by making thicker walls and creating huge oversized gussets. A special retainer ring securely stabilizes the main bearing to prevent bearing play. Other adapters in the market only use a light gauge snap ring to hold the bearing in place. Tight tolerances on the coupler ensure long life and prevent striped out input gears.

Installation requires an additional top shifting Toyota gear-driven transfer case, drive shaft modifications, and floorboard modifications. Assembled dual adapter unit is 6.5" long.

Kit Includes:

* Heavy duty aluminum adapter plate
* Heavy duty coupler
* Cage & main bearings installed
* Replacement transmission output seal
* Magnetic drain plug
* Shift knob
* Mounting hardware
* Transfer case and transmission block off plates


$894 inc gst Purchase from our website http://www.snr4x4.co.nz
'85 Hilux crawler, 3rz, duals, 4.7's, 4.88's, ARB's, 30 spline Longfields, 6 stud SNR4x4 Histeer, Airshocks up front, coiled rear, 40" Iroks.
^^^this shite is all about to change....^^^

021 273 9942

Return to “Motor Transmissions and T-Case ”

Who is online

Users browsing this forum: No registered users and 1 guest