looking at grabbing stuff from http://www.china4x4offroad.co

User avatar
williamhamilton
Hard Yaka
Posts: 763
Joined: Sun Jan 21, 2007 12:00 pm
Location: Wairarapa
Contact:

looking at grabbing stuff from http://www.china4x4offroad.co

Postby williamhamilton » Mon Mar 14, 2011 1:41 pm

Anyone considering grabbing some bits at the moment and would like to share freight etc?

I am looking at putting a small order in shortly and thought I would see if any others of the ORE crew are in the same boat.

PM if you like.

W

User avatar
wjw
Hard Yaka
Posts: 3420
Joined: Thu Jan 15, 2004 12:00 pm
Location: Christchurch
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby wjw » Mon Mar 14, 2011 2:16 pm

SZ803631-2M Length
HD9920060001J1

Could do with prices for the above, would like a compressor off them too but there isn't enough info on their site.
-----------------------
Who knew Prados could fly?

User avatar
pjb
Hard Yaka
Posts: 282
Joined: Wed Feb 17, 2010 8:37 am
Location: North Shore City

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby pjb » Mon Mar 14, 2011 2:23 pm

Yeah, I'd probably be keen for some stuff.
What's the procedure for getting quotes?
Cheers.
94 Pajero SWB, 3.5 V6

User avatar
DaveM
Hard Yaka
Posts: 3249
Joined: Tue Nov 02, 2004 12:00 pm
Location: Blenheim

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby DaveM » Mon Mar 14, 2011 4:27 pm

Did you get the email pricelist? Some pretty cheap stuff on there!

User avatar
mud_slinger
Hard Yaka
Posts: 1050
Joined: Sun Oct 08, 2006 12:00 pm
Location: christchuch

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby mud_slinger » Mon Mar 14, 2011 8:35 pm

who has the pricelist? be keen to know some prices
needs more curry



0272593533

User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby MNC » Mon Mar 14, 2011 8:50 pm

I'd be interested in prices for:

ST040A
X8288 Winch, &
SZ-880088I
Image

User avatar
williamhamilton
Hard Yaka
Posts: 763
Joined: Sun Jan 21, 2007 12:00 pm
Location: Wairarapa
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby williamhamilton » Mon Mar 14, 2011 9:28 pm

I will see what I can pull together.

I have to work through freight and get some prices for that - any pointers for this welcome.

As for bits from China offroad there is a min purchase amount so will need to be good interest if winches/lockers etc are wanted - I am grabbing small bits at the moment so easy to get min orders sorted on those.

Winches and lockers I think are min of 10 - I will confirm tomorrow.

W

User avatar
pressy
Hard Yaka
Posts: 445
Joined: Mon Aug 16, 2004 12:00 pm
Location: christchurch

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby pressy » Tue Mar 15, 2011 6:07 am

im keen to, what are prices like? cheers tony

User avatar
Dace
Hard Yaka
Posts: 981
Joined: Fri May 04, 2007 12:00 pm
Location: Te Horo, Kapiti

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby Dace » Tue Mar 15, 2011 6:52 am

Hi Willy, I would be keen on some synthetic rope

SZ-880088F x30metres

Lemme know a price if possible
Got a Daihatsu Something, hasn't got a Daihatsu engine.... or diffs.... and it doesn't have windows.... or doors.... but its got tyres.... :)

User avatar
muskie
Hard Yaka
Posts: 654
Joined: Mon Jul 10, 2006 12:00 pm
Location: Te Awamutu

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby muskie » Thu Apr 07, 2011 3:48 pm

keen for lockers but having trouble identifying the correct nissan gq part numbers front and rear, dont want to get it wrong..if anyone knows for sure which they are let me know please.

User avatar
williamhamilton
Hard Yaka
Posts: 763
Joined: Sun Jan 21, 2007 12:00 pm
Location: Wairarapa
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby williamhamilton » Thu Apr 07, 2011 4:33 pm

Hi guys, hunting down freight and import etc costs to see if we can get a firm figure sorted. Can you drop part numbers to me to help get the right bits.. see if I can sneak in under the 10 unit min order.

So far I have:
WJW
SZ803631-2M Length - Tree Saver
HD9920060001J1 - light rack

MNC
ST040A - FJ40 Snorkel
X8288 Winch - looks like different supplier
SZ-880088I - Synthetic rope 12mm

DACE
SZ-880088F x30metres - Synthetic rope 9.5mm

(edited to add product details)
MNC need lengths please ;)
Muskie - pm me your email and I will see if I can get some details to you on lockers.

W

User avatar
skid
Tyre Man
Posts: 6309
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby skid » Thu Apr 07, 2011 5:12 pm

williamhamilton wrote:Winches and lockers I think are min of 10 - I will confirm tomorrow.

W


I think you will find thats also a minimum of 10 of the exact same product

ie; 10 of one particluar winch etc etc
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*

u13turbo
Hard Yaka
Posts: 744
Joined: Wed Feb 24, 2010 6:51 pm

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby u13turbo » Thu Apr 07, 2011 9:12 pm

How much are the winches?

User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby MNC » Thu Apr 07, 2011 9:35 pm

Dude, you still looking at doing this.

I'll give the snorkel a miss (going to build one out of exhaust pipe).

Dont worry about the winch - going modify the exhaust and fit the PTO unit I have in the shed.

For the winch rope - I guess 30m would do it. Basically enough to fill a 60 series PTO drum.

Cheers.
Image

User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby Jerry » Thu Apr 07, 2011 9:49 pm

How much for the Rool Bars?
http://www.china4x4offroad.com/product.aspx?SmaID=40

But seriously keen on pricing for the 12mm winch rope (enough for a warn highmount

Can you get pricing on the portable freezers as well?
http://www.china4x4offroad.com/product.aspx?SmaID=50

PS do they sell brake hose as well :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)

User avatar
bobrocket
Hard Yaka
Posts: 119
Joined: Sat Oct 24, 2009 7:58 pm
Location: West Auckland

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby bobrocket » Thu Apr 07, 2011 10:03 pm

muskie wrote:keen for lockers but having trouble identifying the correct nissan gq part numbers front and rear, dont want to get it wrong..if anyone knows for sure which they are let me know please.


They'll ask you for the ARB code for lockers.
I had a look at these at the factory when I was there, the same locker from the same factory is not the same as export quality but in saying that their about $500 Inc freight.

The rope was not cheaper, 100m was about $2 more per meter than D & M standens

You need to specify if you want the 24v compressor.

Be careful on a bulk order, you should be prepared to pay a bit extra at customs. 100kgs of new car parts might catch their eye.

China does not have the same warranty polices as NZ, how much
will you save if you have a problem, assuming of course you can
send it back.

The NZD is very low and the RMB is high at the moment.

They can orgonise freight, door to door, not a huge expense. Nothing like NZ prices. One option could be to do a bulk order but get it split and sent individually.

In saying this, you can get good deals, don't accepte the prices they give you, everything is negotiable.
If you want a hand to sort it just send a pm

Good luck

User avatar
haydgq
Hard Yaka
Posts: 502
Joined: Sun Dec 26, 2004 12:00 pm
Location: Palmy North

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby haydgq » Thu Apr 07, 2011 10:12 pm

The NZD is very low and the RMB is high at the moment.


Most Chinese companies trade in USD and for the last 2 odd years our dollar has been very strong against the USD so its prob a good time to buy now but check the dollar on a daily basis as it changes everyday. :shock:

User avatar
williamhamilton
Hard Yaka
Posts: 763
Joined: Sun Jan 21, 2007 12:00 pm
Location: Wairarapa
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby williamhamilton » Thu Apr 07, 2011 10:16 pm

u13turbo wrote:How much are the winches?

I need confirmed numbers to work out overall cost as freight and import varies a fair whack. Also need to get min of 10 units of each unless I can convince them on samples but more expensive.

Jerry wrote:How much for the Rool Bars?
http://www.china4x4offroad.com/product.aspx?SmaID=40

Image
Jerry wrote:But seriously keen on pricing for the 12mm winch rope (enough for a warn highmount

so 600m Jerry? I will see what they come back with.

Jerry wrote:Can you get pricing on the portable freezers as well?
http://www.china4x4offroad.com/product.aspx?SmaID=50

Will do

Jerry wrote:PS do they sell brake hose as well :lol:

I have not seen any on the site BUT I hear there is a cool guy on ORE that can assist you :mrgreen:

User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby flyingbrick » Fri Apr 08, 2011 7:38 am

im sure they will cave and do "samples"

I know a store that orders lockers/winches etc from there and they order far less than 10 winches (and all different models too)

Be careful as its a bit hit and miss with regards to quality. some parts are good, some parts (like their high lift jacks) are absolute garbage.

Their lockers are better quality than they used to be apparently. spare parts could be hard to source unless ARB parts fit.

if you are smart with the compressors you could save alot of money and get an identical product (eg twin piston typhoon type pumps, yellow t-max pump)

I'll take two of Products Name:SZ-120
phone Ross Bolus (secretary of the BOP club) He'll save you.

User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby MNC » Fri Apr 08, 2011 8:04 am

bobrocket wrote:...The rope was not cheaper, 100m was about $2 more per meter than D & M standens...


If that turns out to be true or even only marginally cheaper then I'd prefer to buy from an NZ supplier.
Image

Kimbo
Bush Crasher
Posts: 84
Joined: Sat Jan 19, 2008 7:45 am
Location: Tokoroa

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby Kimbo » Fri Apr 08, 2011 8:07 am

I am keen on an air locker. i am running 4.8 hilux diffs in my buggy. What number locker fits these as its a bit confuseing to a dumb arse like me :lol:

zukmeista
Hard Yaka
Posts: 2379
Joined: Tue Aug 21, 2007 12:00 pm

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby zukmeista » Fri Apr 08, 2011 8:20 am

I wouldn't mind seeing how much 5 16x6" rims in 5x139.7 stud pattern are :wink:

User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby flyingbrick » Fri Apr 08, 2011 8:36 am

zukmeista wrote:I wouldn't mind seeing how much 5 16x6" rims in 5x139.7 stud pattern are :wink:


shipping makes wheels not worth while i think.
phone Ross Bolus (secretary of the BOP club) He'll save you.

User avatar
wjw
Hard Yaka
Posts: 3420
Joined: Thu Jan 15, 2004 12:00 pm
Location: Christchurch
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby wjw » Fri Apr 08, 2011 8:45 am

bobrocket wrote:Be careful on a bulk order, you should be prepared to pay a bit extra at customs. 100kgs of new car parts might catch their eye.


According to customs there is no duty on car parts, all we would have to pay is GST.
-----------------------
Who knew Prados could fly?

User avatar
haydgq
Hard Yaka
Posts: 502
Joined: Sun Dec 26, 2004 12:00 pm
Location: Palmy North

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby haydgq » Fri Apr 08, 2011 8:52 am

wjw wrote:
bobrocket wrote:Be careful on a bulk order, you should be prepared to pay a bit extra at customs. 100kgs of new car parts might catch their eye.


According to customs there is no duty on car parts, all we would have to pay is GST.



Yea ive brought in welders and winches before and they never had any duty and also sporting goods dont have any duty either.

User avatar
churchill
Hard Yaka
Posts: 1128
Joined: Thu Nov 11, 2010 7:28 pm
Location: Auckland

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby churchill » Fri Apr 08, 2011 8:54 am

X8288 winch was $317USD, wireless remote $15USD and 30mx9.5mm synthetic rope $120USD.

User avatar
williamhamilton
Hard Yaka
Posts: 763
Joined: Sun Jan 21, 2007 12:00 pm
Location: Wairarapa
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby williamhamilton » Fri Apr 08, 2011 10:13 am

So far I have:
WJW
SZ803631-2M Length - Tree Saver
HD9920060001J1 - light rack

MNC
ST040A - FJ40 Snorkel
X8288 Winch - looks like different supplier
SZ-880088I - Synthetic rope 12mm

DACE
SZ-880088F x30metres - Synthetic rope 9.5mm

FLYINGBRICK
SZ-120 - double cylinder compressor - 2 of

ZUKMEISTER
5 16x6" rims in 5x139.7 stud pattern

I am not doing this run as a commercial venture so cannot offer warranty - I see this as a coop purchase while I am going through the process.

So far additional costs will be freight, GST, local port charges, custom clearance and local freight. These all vary on final cost and size. With all payments to be made up front which could be the killer :)


W
Last edited by williamhamilton on Fri Apr 08, 2011 10:31 am, edited 1 time in total.

User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland
Contact:

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby flyingbrick » Fri Apr 08, 2011 10:25 am

I'll take two of those compressors :-)
phone Ross Bolus (secretary of the BOP club) He'll save you.

User avatar
T-Boon
Hard Yaka
Posts: 887
Joined: Mon Dec 22, 2008 10:59 am
Location: Auckland

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby T-Boon » Fri Apr 08, 2011 10:42 am

Prices on TD45C4 and TD20C4 Fridges?

Products Name:Toyota Hilux
Specification:Wheel Arch Flares


and just out of curiosity a rooftop tent - RTT-009

Price query at this stage.
To Boon or not to Boon.

User avatar
tgaguy1
Hard Yaka
Posts: 746
Joined: Sat Dec 24, 2005 12:00 pm
Location: Tauranga

Re: looking at grabbing stuff from http://www.china4x4offroad.co

Postby tgaguy1 » Fri Apr 08, 2011 2:21 pm

I will take a front and rear locker for my patrol

RD 78A front
RD 24 Rear

Do they come with compressors or are they purchased separately. I couldn't find an answer to this on the site.

Cheers

Jase.

Return to “4WD Parts”

Who is online

Users browsing this forum: No registered users and 5 guests