WTB g16b 16v camshaft asap, ph 0211098274 thanks

Just out of interest, what's the model of gauge you have? I've recently bought an Auto Meter 3337-M short sweep electric water temp gauge, and it seems to be reading low, although I haven't got much to back up my claim. Your gauge definitely is missing the metal tabs for the electrical connections ...

[img] B5FE37C0-CC0C-4235-96D4-18CFE7ABE517.jpeg [/img] yeah something is wrong. The top hose would more likely be around 83-90 degrees max as a general rule under conditions you describe. If you were driving it hard, or doing a long uphill, or on sand, it might climb to 100-105. If it was genuinely ...

Just installed a new autometer temp gauge in the vitara. It reads around 118c after warming up and stays there. Have installed a new sender in the back of the thermostat housing which I think is the AC sender hole, Factory gauge is reading just under 1/2 on both senders. Went and got one of those ...

deadduck wrote:No I had it all on the pick up isnt the problem its the drag link that takes some rtv i got sick of rtv so i put a cork gasket

I got it in there and it hasn't leaked overnight. every other person online has said the cork gaskets are shit, has it sorted your leak?

Yes I have now done it twice drop the diff then undo all the sump bolts turn steering one way to get drag link out the way and fight and move in a way where you can get it around the drag link. Did you drop the pick up at the same time? I have it off but it looks like it's gonna be an ass to get ...

Has anyone changed the oil sump gasket on a g16b without pulling the engine? Looks it should come out by dropping the diff out the way?
cheers

All parts in picture 650. Ph 0211098274

I know that the shape before yours can be removed in the vehicle. The middle bolt at the top is the hard one to get but it can be accessed through the transfer case gear lever. From what ive read the differences between the boxes on the older ones and mine aren't much, hydraulic clutch and ...

My 99 vitara is leaking where the transfer case bolts to the gearbox. Does anyone know if I can drop it off without removing the box? I guess its the seal in the attached picture?