Factory alloys off a 07 triton
Have big horns on them with 5 mm tread
In Chch . Can take to Blenheim
After 500 but see what happens
Search found 106 matches
- Sun Sep 16, 2018 10:21 am
- Forum: 4WD Parts
- Topic: 17 inch alloys off 07 triton
- Replies: 0
- Views: 2503
- Sun Sep 16, 2018 10:14 am
- Forum: 4WD Parts
- Topic: Guniune aquamist water meth injection setup
- Replies: 0
- Views: 2436
Guniune aquamist water meth injection setup
Older original aquamist water meth injection setup Was on a wrx originally Adjustable pressure switch . There have seriously good atomization. Can run it in the bench to show anyone This has a .4 nozzle . The blue one if I recall All the original documents are still online . Only thing it doesn't ha...
- Sun Sep 16, 2018 10:09 am
- Forum: 4WD Parts
- Topic: Apexi boost controller . Best one ever made
- Replies: 0
- Views: 2228
Apexi boost controller . Best one ever made
Long time no see . No sign of the ln106 . Bought a 07 triton and couldn't be happier Apexi avcr . Older boost controller but it's made how they should be True closed loop operation . Pick a number and it does it . None of this guessing offsets and gains b.s. Also displays injector duty cycle in petr...
- Sat Jan 13, 2018 8:59 am
- Forum: Range Rover / Land Rover
- Topic: 15x10 Rims
- Replies: 8
- Views: 5699
Re: 15x10 Rims
Or try the internet
- Wed Jan 10, 2018 9:45 pm
- Forum: Tool Shed
- Topic: Low cost compliant Fog lights
- Replies: 7
- Views: 4302
Re: Low cost compliant Fog lights
Need 3 x led light bars to be a real 4x4 these days . They are perfect shape for blocking airflow to a top mount inter cooler scoop also so make sure u mount on the bonnet in the way .
- Fri Jan 05, 2018 9:58 pm
- Forum: Diesel Engines and Modifications
- Topic: mistral TD27 oil coller mod?
- Replies: 9
- Views: 7738
Re: mistral TD27 oil coller mod?
Does the viscous actually bite when the engine gets hot and sound like a plane taking off and you can feel it rob 5hp off the engine ? Or just oh yea it spins around and I guess it's working Put a cheap crappy temp sensor on /in the bottom rad hose and go test it . If that gets hot under those condi...
- Sun Dec 17, 2017 5:38 am
- Forum: Nissan
- Topic: What are these?
- Replies: 2
- Views: 1133
Re: What are these?
The small one does nothing other than turn on the cat temp light on the dash .
The big one is for closed loop fuel trim at idle /cruise . Saves you gas
The big one is for closed loop fuel trim at idle /cruise . Saves you gas
- Sun Dec 10, 2017 10:20 pm
- Forum: Diesel Engines and Modifications
- Topic: LD28 turbo
- Replies: 15
- Views: 10929
Re: LD28 turbo
I've got a modernish td04 off a 01 wrx that is quite responsive and only does about 200 something hp on a petrol . I was going to try it on my 5l at some stage .
I've got all the banjo bolts and you can get flanges from auto bend .
In chch . It's prolly worth 100
I've got all the banjo bolts and you can get flanges from auto bend .
In chch . It's prolly worth 100
- Thu Nov 23, 2017 7:29 am
- Forum: Tool Shed
- Topic: 2nd opinion, are my batteries stuffed?
- Replies: 9
- Views: 4877
Re: 2nd opinion, are my batteries stuffed?
Yea you've done well having them last that long .
You'll prolly get the better part off 100 dollars at the scrappy for your current ones aswell
You'll prolly get the better part off 100 dollars at the scrappy for your current ones aswell
- Tue Nov 14, 2017 7:52 pm
- Forum: New Members and Beginners
- Topic: need more power
- Replies: 3
- Views: 4946
Re: need more power
The answer is no . It's not like it has a restrictor you can pull out anywhere
- Wed Nov 08, 2017 5:59 pm
- Forum: Projects / Mod's
- Topic: Warn 8274 DIY upgrades
- Replies: 41
- Views: 18399
Re: Warn 8274 DIY upgrades
Oh yea sounds promising .
- Wed Nov 08, 2017 11:16 am
- Forum: Projects / Mod's
- Topic: Warn 8274 DIY upgrades
- Replies: 41
- Views: 18399
Re: Warn 8274 DIY upgrades
I think the brake system is going to need a bit more thought on the whole . What is the rpm increase /torque multiplication from the drum to the disk ? As a disk and pads isn't going to deal with the heat or a lot or torque at low rpm Those disks are made from God knows what garbage. But it rusts un...
- Sat Nov 04, 2017 8:17 am
- Forum: Diesel Engines and Modifications
- Topic: Wastegate Creep
- Replies: 5
- Views: 4942
Re: Wastegate Creep
http://www.autospeed.com/cms/article.html?&A=111350 So in short get a low pressure adjustable relief valve and get a small one way valve . The relief valve might cost some money . T fittings and hose and a check valve all should cost a few dollars each . Plenty of petrol cars have 5mm check valv...
- Sat Nov 04, 2017 8:06 am
- Forum: Diesel Engines and Modifications
- Topic: Wastegate Creep
- Replies: 5
- Views: 4942
Re: Wastegate Creep
Read this to do it properly Also it's worth finding the "part two" of that article on same page http://www.autospeed.com/cms/article.html?&title=The-Audis-DIY-Boost-Control-Part-1&A=111348 The other option is just use a longer piece of vacuum hose to go to the actuator . Like actua...
- Sat Oct 21, 2017 5:57 am
- Forum: Toyota
- Topic: 1KZ-TE chip tuning available
- Replies: 2
- Views: 3801
Re: 1KZ-TE chip tuning available
So what did you actually receive ? A plug in box ? Or a chip you had to install in the ecu ? Or a resistor to wire to a sensor ?
- Sat Oct 14, 2017 12:31 pm
- Forum: Stolen / Lost and Found
- Topic: Ln106 BML286 . White DC . Stolen chch
- Replies: 2
- Views: 13096
Re: Ln106 BML286 . White DC . Stolen chch
Have had word that a2z wreckers are exporting anything they can get their hands on at a great rate of knots . Was insured for 8k . Prolly should have upped it to 10 given its current state .
Bit gutted because it was a good truck . Had been a pilot vehicle all its life .
Bit gutted because it was a good truck . Had been a pilot vehicle all its life .
- Fri Oct 13, 2017 8:22 am
- Forum: Stolen / Lost and Found
- Topic: Ln106 BML286 . White DC . Stolen chch
- Replies: 2
- Views: 13096
Ln106 BML286 . White DC . Stolen chch
So this wasn't in the driveway this morning
5l turbo . Custom fmic
Surf grill n lights .
33s on white trak rims .
50mm springs .
Alloy winch bar
Alloy side steps n roll Bar
Honda front seats
5l turbo . Custom fmic
Surf grill n lights .
33s on white trak rims .
50mm springs .
Alloy winch bar
Alloy side steps n roll Bar
Honda front seats
- Mon Sep 18, 2017 10:01 pm
- Forum: Having problems?
- Topic: 1kz-te Vacuum shut off valve piping problem
- Replies: 1
- Views: 3208
Re: 1kz-te Vacuum shut off valve piping problem
That took a whole 3 seconds to when I googled 1kzte vacuum diagram
- Sun Sep 10, 2017 8:53 pm
- Forum: Toyota
- Topic: Problems With Manual Conversion LN130 91 2l-te Surf.
- Replies: 15
- Views: 4801
Re: Problems With Manual Conversion LN130 91 2l-te Surf.
Surely that is intended to mean don't cut down or modify the original one .
If you bolt in an oem manual one Noone is going to care
In the same way every one swaps an oem auto drive shaft and cross member for the manual eqiilivents
If you bolt in an oem manual one Noone is going to care
In the same way every one swaps an oem auto drive shaft and cross member for the manual eqiilivents
- Sat Sep 09, 2017 10:23 pm
- Forum: Toyota
- Topic: Problems With Manual Conversion LN130 91 2l-te Surf.
- Replies: 15
- Views: 4801
Re: Problems With Manual Conversion LN130 91 2l-te Surf.
Can you elaborate on this a bit more ? Or paste the specific wording that rules a pedal swap as needing cert . I'm not arguing or disagreeing . Just seems dumb if you are bolting oem stuff in ?
- Tue Aug 15, 2017 9:42 pm
- Forum: 4wd Safety
- Topic: Nearly rolled Safari, driver's side, issues?
- Replies: 5
- Views: 4890
Re: Nearly rolled Safari, driver's side, issues?
Someone's confused a jet ski with a car
- Wed Jul 12, 2017 6:46 pm
- Forum: Nissan
- Topic: 1994 mistral R20 rear drum brake problem
- Replies: 12
- Views: 2797
Re: 1994 mistral R20 rear drum brake problem
Is this 500 psi at the master cylinder or down at the wheels ? Reason I ask is does it have rear brake restrictor like a hilux has ? That applies more force to the rear wheels if the vehicle is heavily loaded ? Has a valve on the body and a linkage to the diff . When the diff gets closer to the body...
- Sun Jun 25, 2017 11:58 am
- Forum: Toyota
- Topic: Upgrade from a ct20
- Replies: 19
- Views: 6778
Re: Upgrade from a ct20
Do you have a watercooled ct20 or the non watercooled one . The late watercooled one is considered an upgrade for the early one so it could be worth doing that . I have that on a 5l and it goes great
- Sun May 14, 2017 4:23 pm
- Forum: Diesel Engines and Modifications
- Topic: Rear fan trigger points, max coolant running temp.
- Replies: 10
- Views: 5808
Re: Rear fan trigger points, max coolant running temp.
1kz is bottom thermostat so no point turning fan on at anything close to thermostat temp. engine exit temp should be well above thermostat temp. if you have a 10c split switch then i would be inclined to set it 100c on, 90c off. try not to cool the water in the radiator below thermostat temp as tha...
- Thu May 04, 2017 9:23 pm
- Forum: New Members and Beginners
- Topic: New heap in chch
- Replies: 13
- Views: 10218
Re: New heap in chch
Since then it's had some 33s . Redid all the turbo hoses coz they were shit . Underseat sub . Coz need tunes . And tonight bolted on an alloy winch bar I got for 400 StI'll planning to do x over steering . Lsd spacers . Swivel seals . Front shocks to match 50 mm lift springs . Might move front axle ...
- Sat Apr 15, 2017 8:50 am
- Forum: 4WD Parts
- Topic: 19mm inline radiator caps for water intercoolers etc
- Replies: 0
- Views: 1252
19mm inline radiator caps for water intercoolers etc
I need a 19mm ( 3/4) inline radiator cap for a bike project . Nothing local was obvious to me so I'm going to get some off amazon . They are the same ones froozen boost sell . These would be handy for water to air intercooler setups . Just wondering if anyone else wanted one or more whIle I'm at it ...
- Wed Apr 12, 2017 10:26 pm
- Forum: 4WD Parts
- Topic: Wtd EGR cooler core .
- Replies: 3
- Views: 1002
Re: Wtd EGR cooler core .
Nah I DONT want one that big lol .already got one . It's off a 500 horse scania. Was potentially going to be heat exchanger in a jet boat .
Did actually use a Subaru Intercooler as a heat exchanger in the jet boat for a whIle lol
After a Lil one for now please
Did actually use a Subaru Intercooler as a heat exchanger in the jet boat for a whIle lol
After a Lil one for now please
- Wed Apr 12, 2017 9:53 pm
- Forum: 4WD Parts
- Topic: Wtd EGR cooler core .
- Replies: 3
- Views: 1002
Wtd EGR cooler core .
After a egr cooler . None in particular . Only desirable part is simple conections as using it for a wet suit warmer on a dredge . Anyone got something on a blown up motor or pile of parts ? And not a massive one off a truck . Already have one of those . It's 2 inch exhaust connections and inch wate...
- Wed Apr 05, 2017 9:58 pm
- Forum: Toyota
- Topic: calling 1KZTE (spec. kzn185) gurus
- Replies: 22
- Views: 7538
Re: calling 1KZTE (spec. kzn185) gurus
Do none of you consider that a lower temp thermostat makes the whole cooling system less efficient? And makes less power ?
- Wed Apr 05, 2017 9:51 pm
- Forum: The Bike Bar
- Topic: fs Yamaha yfz450 quad recent full reuild
- Replies: 1
- Views: 13075