Search found 466 matches
- Wed Sep 03, 2014 5:33 pm
- Forum: 4WD Parts
- Topic: 40/45 series bits
- Replies: 7
- Views: 948
Re: 40/45 series bits
Yeh mate saturday arvo would suit me best. Cheers give me a txt and ill let you know where my place is
- Sat Aug 30, 2014 10:49 am
- Forum: 4WD Parts
- Topic: 40/45 series bits
- Replies: 7
- Views: 948
Re: 40/45 series bits
yeh mate that suits me fine, 0274202727 will get hold of me, best to txt at the mo as im on night shift, so im asleep all day till thursday at least
- Fri Aug 29, 2014 7:27 pm
- Forum: 4WD Parts
- Topic: 40/45 series bits
- Replies: 7
- Views: 948
Re: 40/45 series bits
Unsure what that is. Is it the brake drum on the rear drive flange? If it is yes it has one. Make a offer cheers
- Fri Aug 29, 2014 12:39 pm
- Forum: 4WD Parts
- Topic: 40/45 series bits
- Replies: 7
- Views: 948
40/45 series bits
gidday i have handfull of left over bits from a 40/45 series i had, 2x front diffs, one is missing the hubs and tie rod the other is complete hub to hub, one rear full floater housing missing the head and long side axle i think it is, a gear box/transfer, know nothing about it speedo cluster one cur...
- Thu Aug 21, 2014 3:30 pm
- Forum: 4WD Parts
- Topic: wtb 70series lift springs and shocks
- Replies: 6
- Views: 828
Re: wtb 70series lift springs and shocks
it is extremely tidy, couple of issues with the age of it but nothing major, at all, other than the springs and shocks being stuffed
- Thu Aug 21, 2014 1:49 pm
- Forum: 4WD Parts
- Topic: wtb 70series lift springs and shocks
- Replies: 6
- Views: 828
- Thu Aug 21, 2014 11:18 am
- Forum: 4WD Parts
- Topic: wtb 70series lift springs and shocks
- Replies: 6
- Views: 828
wtb 70series lift springs and shocks
as title says, whats out there, mainly after springs though.
cheers
cheers
- Tue Feb 18, 2014 10:23 am
- Forum: 4WD Parts
- Topic: jasic xmp4000 3 in 1 welder
- Replies: 0
- Views: 415
jasic xmp4000 3 in 1 welder
160amp arc tig plasma cutter unit about 3years old
paid $1800 for it back then hardly been used, need the coin to help buy a 40series
wanting $950 for it
cam
paid $1800 for it back then hardly been used, need the coin to help buy a 40series
wanting $950 for it
cam
- Tue Feb 18, 2014 9:56 am
- Forum: 4WD Parts
- Topic: Wrecking 1991 Prado LJ78
- Replies: 36
- Views: 5676
Re: Wrecking 1991 Prado LJ78
giday after the light/wiper stalks and the bit that fits round the steering columb. also the plastics/cage etc that is round the stereo in the middle of the dash?
cheers cam
cheers cam
- Fri Jan 24, 2014 4:56 pm
- Forum: 4WD Parts
- Topic: WTB 2lte injector pump and housing that holds it to engine
- Replies: 2
- Views: 564
Re: WTB 2lte injector pump and housing that holds it to engi
its the lip that the injector pump sits into that has slogged out. hopefully should be able to get the gasket. other option is to get it all off and get it built up and machined but i think that would cost more than to replace it with a 2nd hand one http://i100.photobucket.com/albums/m16/2roky/pumpe...
- Fri Jan 24, 2014 4:22 pm
- Forum: 4WD Parts
- Topic: WTB 2lte injector pump and housing that holds it to engine
- Replies: 2
- Views: 564
WTB 2lte injector pump and housing that holds it to engine
as title say im after the injector pump and the housing that holds it as mine has broken the studs and slogged it's self out.
- Mon Nov 04, 2013 9:01 am
- Forum: 4WD Parts
- Topic: wanted diff lock drive motor to fit a 1996 prado
- Replies: 2
- Views: 425
wanted diff lock drive motor to fit a 1996 prado
does anyone have one or can any one rebuild them? mines all corroded up
- Mon Oct 21, 2013 1:52 pm
- Forum: 4WD Parts
- Topic: hilux diffs (beam front) complete hub to hub
- Replies: 6
- Views: 1035
Re: hilux diffs (beam front) complete hub to hub
giday would be looking round about 100-150 at a guess going by what it cost to ship a gearbox to auckland
- Fri Oct 18, 2013 7:29 am
- Forum: 4WD Parts
- Topic: hilux diffs (beam front) complete hub to hub
- Replies: 6
- Views: 1035
Re: hilux diffs (beam front) complete hub to hub
haha yeh they are still worth a dollar. wreakers charge 200 odd or more just for a diff head
- Thu Oct 17, 2013 3:26 pm
- Forum: 4WD Parts
- Topic: hilux diffs (beam front) complete hub to hub
- Replies: 6
- Views: 1035
Re: hilux diffs (beam front) complete hub to hub
need them gone wanting 300 for them
- Sat Oct 12, 2013 5:18 pm
- Forum: Toyota
- Topic: rebuild a lj78 clutch master cylinder?
- Replies: 6
- Views: 1059
Re: rebuild a lj78 clutch master cylinder?
does anybody have a contact number for don kyatt?
- Sat Oct 12, 2013 1:55 pm
- Forum: Toyota
- Topic: rebuild a lj78 clutch master cylinder?
- Replies: 6
- Views: 1059
Re: rebuild a lj78 clutch master cylinder?
if i do a rebuild will i just have to get the seals or do i need to replace the whole plunger assembly? repco has nothing listed and cant find anything to suit. although the guy i dealt with seemed pretty tired on it and reluctant to do anything other than push a few numbers on the computer. wont be...
- Fri Oct 11, 2013 9:13 pm
- Forum: Toyota
- Topic: rebuild a lj78 clutch master cylinder?
- Replies: 6
- Views: 1059
rebuild a lj78 clutch master cylinder?
has anyone done this? mine isnt holding pressure. cant find a listing for either a after market master cylinder or a rebuild kit at either appco or bnt
trucks a 1990 2lte
trucks a 1990 2lte
- Fri Oct 11, 2013 11:23 am
- Forum: 4WD Parts
- Topic: hilux diffs (beam front) complete hub to hub
- Replies: 6
- Views: 1035
hilux diffs (beam front) complete hub to hub
as title states i have a complete set front diff has been stripped (all the parts are there for it) and the mounts removed as i was going to use this in a project, no longer need them
they came out of a 84 surf
front diff is disc braked rear is drum
make a offer. be good for a sas conversion
they came out of a 84 surf
front diff is disc braked rear is drum
make a offer. be good for a sas conversion
- Fri Oct 11, 2013 10:30 am
- Forum: Land Access / DOC legislation / Regulations
- Topic: Chch boy racers converting to 4x4's ?
- Replies: 12
- Views: 3173
Re: Chch boy racers converting to 4x4's ?
dunedin is a tricky one. all the old tracks such as friends hill, abbotts hill and the karati (spelling) tracks were shut off by the council a few years ago leaving no where handy to go and test modifications or just a week night wheel. the hoon element has all ways been there and for as long as i c...
- Fri Mar 29, 2013 8:44 pm
- Forum: Toyota
- Topic: lj78 a few questions about lifting and clutch issues
- Replies: 9
- Views: 1266
Re: lj78 a few questions about lifting and clutch issues
cheers i've allready got a set of 80 series springs sitting here just need to get shocks and something to sort the front end out
- Wed Mar 27, 2013 10:09 pm
- Forum: Toyota
- Topic: lj78 a few questions about lifting and clutch issues
- Replies: 9
- Views: 1266
Re: lj78 a few questions about lifting and clutch issues
the new 70 series might fit i'll run a tape measure over one of the ones at work if i can get into the work shop when we have one out for what ever reason.
- Wed Mar 27, 2013 5:23 pm
- Forum: Toyota
- Topic: lj78 a few questions about lifting and clutch issues
- Replies: 9
- Views: 1266
Re: lj78 a few questions about lifting and clutch issues
awsome cheers i'll start there, theres no visible leaks so would it possibly be bypassing the internal seals and bleed back into itself?
- Wed Mar 27, 2013 4:42 pm
- Forum: Toyota
- Topic: lj78 a few questions about lifting and clutch issues
- Replies: 9
- Views: 1266
lj78 a few questions about lifting and clutch issues
i have recently aquired a 1990 lj78 2lte. i had to replace the clutch as it was poked since done that, now the clutch seems to loose pressure and the vehicle starts creeping or you can get it out of gear if you have had you foot on the pedal for any period of time. the pedal also stays stuck down wh...
- Thu Feb 28, 2013 10:10 pm
- Forum: Toyota
- Topic: Toyota Prado 90 33s?
- Replies: 5
- Views: 3076
Re: Toyota Prado 90 33s?
i have the narrow body version.... none of the plastic's to break, factory rear locker im running a set of 265 75 16 coopers and also a set of 33, 10.5 16 silverstones,
standard 2" suspension lift and only get a little front guard rub if i turn and drop off a ledge/bank alittle hot
standard 2" suspension lift and only get a little front guard rub if i turn and drop off a ledge/bank alittle hot
- Thu Dec 06, 2012 9:40 pm
- Forum: Projects / Mod's
- Topic: rocky on roids
- Replies: 9
- Views: 1862
Re: rocky on roids
cheers, i discovered dont try and design mounts hung over. did the mounts to the diff the other morning and completely over looked the fact that the top of the diff is curved and not square...... :| that will learn me. i havent checked articulation as of yet as im still to mount the diff up. that wi...
- Mon Dec 03, 2012 10:18 pm
- Forum: Projects / Mod's
- Topic: rocky on roids
- Replies: 9
- Views: 1862
Re: rocky on roids
cheers guys yeh im leaning towards coilovers for the ease of fitting them and also the fact that they work better. its going to be a slowish build i think
- Sat Dec 01, 2012 8:35 pm
- Forum: Projects / Mod's
- Topic: rocky on roids
- Replies: 9
- Views: 1862
rocky on roids
figured i should start a build thread seeing as my project is finally starting to take shape. the base for the project was a 1995 daihatsu rocky (f300) the plan is/was to strip the chassis down and put hilux axles under it with either coils or coilovers on it and a toyota v6 and auto out of a surf. ...
- Wed Nov 21, 2012 9:15 pm
- Forum: Daihatsu
- Topic: and it starts again
- Replies: 8
- Views: 5234
Re: and it starts again
been along time coming but finally the project has drive again and direction. i cut all the ifs mounts etc off the chassis and plated it up to strengthen it. cut all the old spring mounts off the hilux front axle an.... ive decided to go 3link+panhard front end and coil overs allround. have the fron...
- Tue Nov 20, 2012 9:03 pm
- Forum: 4WD Parts
- Topic: landrover discovery radius arms
- Replies: 0
- Views: 279
landrover discovery radius arms
trademe auction http://www.trademe.co.nz/Browse/Listing.aspx?id=535601646&ed=true
i want these things gone make a reasonable offer
i want these things gone make a reasonable offer