there won't be any more hassles with adventures_more full stop , he won't be using these sites anymore ,"you live & learn" & "You can't please everyone " - shit happens i spose ! see ya

Anyone know the Internal ( Engine ) difference's between a 2JZ-GE & 2JZ-GTE ??? is the crank the same material & forging & what about the rods , etc ?? Obviously the pistons will be different & possible the camshaft profiles ,etc ??

Matt >> for one rather have 1 exhaust line , also to have more room in the engine bay for certain things , having V - you lose space left & right from the banks of the cylinders ( depends how on big it is & what size your engine bay is ) , already sussed out the 1uzfe & seekn a supercharged straight ...

good advice skid , - cheers

sadam >> yours a 2 or 4 bolt mains & you using stock iron heads , any mods ?

sadam .>> which chev engine did you put in there ? use petrol or LPG ? gas guzzler ?

NJV6 >>> #### off , show some friggn manner's when posting , must a got out on the wrong side of the bed or something ? Well lets see, i bought this LJ71 10 months ago , since then i bought a 13BT , a 14B engines , then stripped the 14B for the crank & flywheel & was going to stroke the 13BT but ...

Wondering if many people have these in their 4x4's , what generation is yours ? Auto or manual ? what bellhousing or adapter plates your using ? etc , etc ............ ( thinking about a conversion into a 89' LJ71 & seek info )

Looks like WJW ( Bill ) has got the case - if you give me a look at your engine bay when you pick it up ( I'm looking for a suitable engine for a conversion ) I also have 2nd hand driveshafts & drum brakes from the same LJ71 , they have new gearings on them , all of 3-4 months old - not sure if i ...

SOLD the kit today !

I just picked up a good "kzj78" 2nd hand transfer case on the weekend , plan to replace mine this weekend if not the next ( too noisey ), you can have the case that i pull out - its from a 89" LJ71 & is identical to the kzj78 case as far as i can see , same 38mm idler version ! where are you ? I'm ...

shit - why do people take things personally when you ask & enquire about something , i was just curious what people think of lineside in general , if they had any problems with them , etc . As far as i know they are the same company - Lineside & just cruiser's , you pay at the front desk of lineside ...

spose any place will give you advise from their experience , way to attract more cust$mers ! I have nothing against them , good for parts ,etc but expensive . But that circumstance was a really weird one , never come across that in my life .

Just curious if any people have had hassles with them ?

yep -= it was going to take a week or more just to get it , then another 5 days to clear , until i went back the next day & said "give me my $ now " & he said , come back tommorrow around 10am & you'll get it , so went there the next day as soon as i could which was around 12.30 ( lunch break ) as ...

I'm just curious if anyone has had any problems with lineside auto in Rangoira ? I bought a master cylinder for my LJ71 cruiser thru Landcruiser section , I specified what i wanted & the vehicle it was going in, he gave me the wrong one after driving all the way back to CHCH & pulling mine off ...

Niblik >> strangely enough i did'nt get it , last i heard after you txted me , you were pickn it up last week ? Kaney >> landcruiser Prado transfer case's are hard to come bye ( every now & then on trademe ) , i bought the wrong case awhile ago think'n a series 60 case 34mm idler will bolt up . then ...

I'm looking around for a good 2nd hand transfer case for my 2LT & manual 89' LJ71 cruiser - mines friggn noisey . Will a transfer case off a prado with a 2LTe an Auto box bolt up to a manual box ( if i pulled it off the auto transmission & bolted it up the manual box ) or will this not work ???

How do you get really tight bends like a 50c coin sorta bend ,when you do it by hand? Only i can see it done is with a wee bender like 91Rangie's , have seen other hand bending tools around too, how would oyu bend stainless steel line's by hand then( alot stiffer than ally ) ?

same vehicle mines a 89' LJ71 , i got a slightly bigger bore , stock= 7/8 New one = 15/16 & it feels heaps better & stops harder , weird but true. Cost me $120 brand New from Butler Auto in sydenam , they ordered it in from AUK .

91rangie >>what do the hand benders look like ?

I just got a new master cylinder for my 4x4 as my last one shat itself , so after much hunting around & get a brand new one , but the friggin pipe for the front brakes screws into another spot on the master cylinder ( closest master cylinder match i could get with bugger all time up my sleeve ), so ...

they're in Chch too , i have bought stuff from them , bunch of chicks at the counter on sometimes . use Butler Auto in Sydenam now , they really know they're stuff , plus they are a good price on most things & they're really friendly , supercheap is good when they like 25% off everything sale's and ...

H2OLOVA >>> Easy to find what size idler your Transfer has , on the rear of your case looking back towards the engine , you will have the input shaft/gear plate ( Top left ), then idler shaft ( Middle ) , Output shaft ( Bottom right ) . Just measure the round section of the end of the idler with ...

For sale : New complete landcruiser up to 85'( 34mm idler) transfer rebuild kit (Terrain tamer Tk4 Kit ), ibought the wrong one for my cruiser . so collecting dust on the shelf . yours for around $130 , i paid a bit more , so my loss -your gain !

I bought a die grínder abrasive bit & used it in my power drill & just ground out a section of the outer race & popped it out with a punch ,worked a treat . cheers for the info !

Next time will get a puller , toledo make one especíally for the job that cost's around $70

I reck'n vehicle's with portal axles/diff's ( Unimogs) have an insane ability to go places where most other 4x4's can only dream of , but when they get stuck , they are generally well & truly stuck & most 4x4's would'nt be able to get them out , need another Mog , 6x6 or bigger still ( unless you ...

Daz >>> the article gave me an idea , i'll try it out & get back to say how it went !

i went to a wrecker in falsgrave st , chch yesterday . they have a good 2nd hand solid mass 3L ( 2.8 ) flywheel & complete clutch for $250 , 3L flywheel is sapposedly the same as the 2L/T flywheel ?

was quoted around $365 for a brand new one from lineside in Rangoira , but they are a rip off anyway ! i wonder who "maxamiss" , maybe from this site ? MAHINDRACJ4A>> is that a willy's jeep you have or what model is it ? i used to have a 68' J200 that had dana 44's front & rear ,dana 20 t/case ...

Smurf >> no worrys mate , won the Auction . A tad past my max i wanted to pay , but need one a.s.a.p to get my daily driver back on the road . do you know of any frieght company's that frieght to Chch fast ? cheers all Rick p/s: for anyone who needs custom springs made for what ever , i found a ...

bugger - i have an air die grinder , but i don't have a compressor . an electric one would come in handy !

I yanked my gearbox last weekend to replace my clutch , to find my multi-mass flyweel has 3 buggered springs out of 4 , pilot bearing stuffed ,etc . So after getting my part's & try'n to get this stuffed pilot bearing out of then end of the crankshaft , the outer race is left in the crank after try ...