Try talking to these's guys New Zealand Brake Company Ltd
(09) 836 6673

Panhard rod bushes, they may look fine but they need bugger all wear to sart shaking. Upgrade to a heavy duty one while you are at it, Should last another 25 years........

It is not on the big grinders that can cause damage and please keep the safety guards on........ :roll: :roll: Last year when working at A&E in Kaitaia I triaged a gentleman who had the cutoff disk off the smaller grinder shatter. The end result was two knuckles cut in half and the skin on his hand ...

Head has cracked.....

derk wrote:when you take the roof off you mount the seat belts on the roll cage, they usually make you weld the seatbelt mounts on the back of the B hoop so theres no forward facing projections to smack your scone on ,

x2

Used to run a 600 vac secondaries on my 350, PITA, then went to 750 double pumper with an off-road kit, still a PITA, sold the wagon after that and went back to diesel . My last dealings with a 600 were on Jumpers 40 with 350, his face as I hit the float bowls with a hammer to free up the float ...

Only got some of the fishing gear back unfortunately.

They are still going to take him on at the new job but there are a few conditions that they are going to put in place, good buggers they are. I think they were going to enjoy watching him squirm thou

Nope, did call in to let them know that is might be late tough, not a totally heartless bastard. Did ask if they could give him a lift to the police station later if he asked

so... how did it go down?! Like a male stripper at a lesbian convention!! Thought I would stop halfway into town and let him know what I was doing, he bailed real quick Shame I live about 30kms out of town Drove back past him a couple of hours later, still hitching and still in the middle of ...

Even better, the little shit is starting new job in town on monday and i have offered to give him a ride into town. Little does he know I have the fishing gear in the boot and am calling into the police with it for evidence that morning

Taz wrote:Sorry to hear that man. Kids toys are bad enough but who steals porn?! Heartless.

And then who steals from their neighbour and sells the shit to the neighbour on the otherside

Real rocket scientist this one

Some slimy little bastard has raided our garage. Anyone being offered cheap kids toys and clothes, tools, honda civic parts, very expensive mountain bikes and porn ( ) in the Whangarei area let me know

Jerry wrote:were they really that odd

If they had of been neither of us would still be here

You wont need body lift for 33", could just about fit 35' with a bit of guard trimming. Wouldn't worry to much about the rear auto locker either at this stage. Just try the front one only for a while. Thats all i had in mine

Imho i think he works there Ok Mudluva Lets put it like this, you have made the statement I am prepared to put up $2000 if you can back up your statement that I work there. Plenty of people on the forum know me outside of the Forum so lets see your money, put it where your mouth is You are a cock ...

haydz wrote:Bump need one asap got 11k

Shit, the missus spend 1k in three days??

Thanks guys. They are the same tyres that got the last two warrants, so should normal tyres and we don't have winters here!! It also failed on the seatbelts not being the correct type?? and no back seatbelts?? Nothing changed since factory and back seatbelts are not required because of its age. It ...

Evening all, still here, just not posting much due to lack of 4WD stuff. Question about WOF... Just took the old vintage hill climb car in for a WOF today at a garage near my parents place where I store it near Warkworth. It failed on a couple of things that seem a bit out of place. The garage ...

cheers curly,so 2 hammers....incase i break one Thanks for the quick reply man.... Quick repy??? The joy of being a student and bored in class . The hammers are just to get the bastards off. Don't forget to measure the length of the tierod as it will chew the shit out of the tyes if you get the ...

Left and right, yeah, leave the axle on the ground and make sure you have two large hammers to remove the tierod ends

De-Ranged wrote:

sibainmud wrote:Same Same as described above. Happens on phone too.
Cheers

Funny you mention this as it was your account I was logged into

X 2

Crash bandicoot wrote:

fatdog wrote:whats the drama with body lifting a gq auto ?????

Depends if the rust can take the weight when jacking the body i spose

Or the firewall doesn't crack and separate on the first bump you hit, try a search ....

skid wrote:

skid wrote:

skid wrote:confirmed list

Bolo plus 2
Jafa
Dace
Tony . Graham
Adrian
Gareth
Nick
Curly

do we have any more takers ??

Well I guess I can put the books away for a few days and pop down and make sure you buggers havent forgotten how to run one again...

fish wrote:What is lpg fumigation?

If you have some time to kill this thread will explain it and more...

http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=46&t=15576

I have PRS mounted where my ash tray was, and a UBCT-8 scanner DIN mounted under the head unit. I have a VHF Tait 2020 about to arrive back from repair as well as a Realistic TRC-453 CB that I need to get back and install. And a 706 with remote head kit might be good for you. At the Jock White and ...

Well don't bother with BL, if it was me and i did it all over again I would stick with your current lift and attack the guards with a grinder. I had 4" spring lift and fitted 35 creepys with no issues. The lift in my old POS (forge1 has it now) is now about 50mm and I would be happy to run 35's with ...

ROFLMAO!! 80mph??? The only one of mine that every did that was running a 350 and that was scary as hell. I still have the image burned in my head of Abbo holding the roof down on my last one, while he was in front of me driving it to rallywoods and that was at 50mph.

http://www.fuelly.com/car/mitsubishi/pajero/gas%20v6/suv

pos safari 2567kg with me in it, probably 2000 without..... and now ray has it about 1000 kg cause he swapped all the good stuff off probably got rid off about 1000kgs of rust

drive it ... wrote:Nice to see NZ logo on some tech gear. Flying in the Iroquoi's is a bit like hitching a ride in a series landie: all good but there's better tools for the job (fetch popcorn now for LR bites)

Your point??