kerikeri northland

i have 4 near new silver stone tyres fitted to near new 15x8 rims unfortunately they are to big for the navara ( im restricted to driving in a strait line with them) so am looking for a good set of 31s or 32s on rims
0212968364

it came standard with the twin v belt clutch so i would have do guess it is designed to handle the power required to run it thanks

7 inch pulley thanks all i know is what the specs say thanks

SPECIFICATIONS • Capacity ..........................................................21 GPM • Maximum Pressure ..........................................3500 PSI • Rear Ports ......................................1-1/4” NPT X 1” NPT • Rotation CW ........... ...

here i have a near new hydraulic clutch pump sutable for winch truck runs a 12v clutch 22gpm large pump (to big for what i am after)
OFFERS
0212968364

give me call if you are interested rust is mostly surface couple spots on sills

bay of islands will be going on trade me tonight

will be great club, hunting, bush truck, or if you wanted to spend some time and get it on the road this was my intention but i dont have the time
rough cond
reg on hold
4.2 diesel
snorkel
auto (little bit sticky in 2nd)
cheap platform to start from
as is
bay of islands
0212968364

looks like i am going to be in for a new clutch on the old d22 navara. A bit of research uncovered that it probably has a duel mass flywheel and the prices coming back to replace it are scary! So i found a bit of information stating that the td27 flywheel uses the same bolt pattern and same gearbox ...

i have a 1989 landcruiser 60 series running a 12ht manual has pto winch.
my work position has changed and i now needing a ute again so looking at swapping for a hilux or similar.
ph/txt 0212968364

currently fitting a pto winch to the front end, have everything but the shaft.

im finding it hard to find just the shaft as people want to sell winches complete maybe some one has a spare shaft lying around?

i have a high mount for sale http://www.trademe.co.nz/Browse/Listing.aspx?id=659185450

yea they are cheap on e bay but $150 in shipping..... do i need the anti inversion ones? found these on tm http://www.trademe.co.nz/motors/car-parts-accessories/parts-other-makes/suspension/auction-656785440.htm
what do you think

am looking for a small lift for the bj74 just want to know a good place to get a cheap set of extended shackles or if any one has some lying around for sale.
will be using factory springs for now do i need anti inversion shackles?
thanks

yea differently has alot of grunt. had a small pinhole in the alloy rad so was unfix able being alloy.

bump 5k now on trademe http://www.trademe.co.nz/Browse/Listing.aspx?id=647869059

northland..

1994 fzj80 *wof feb next year *320000k *1fz-fe 4.5l petrol (lots of grunt) *new front bucket seats *new radiator (expensive copper one) *new water pump *front and rear diff locks *rebuilt front diff body in good condition but some clearcote peel and drivers door a different silver not green $6000 pm ...

that sounds good i will get back to you. i have factory e locker do you know if these are the same will have mine out next week to inspect.
thanks

looks like i have cooked my front diff after the truck broke down. (hole in radiator ) We towed the truck for about an hour home but one of the kids must have bumped the centre difflock switch , so with the ignition on i didnt notice the truck was in 4wd. when we got home after the tow i noticed a ...

had a small incident this evening and now after a drivers door for the 80. any one with a wreck in northland / auckland
thanks

am looking for some 80 series lift springs approx 2 or 3 inch, just a small lift or a cheap place to buy new ones

looking at a runva winch at this stage but once i get the pump tackled may look further. 1200psi would just be a starting point (safe) untill i can find out exactly what the steering box is capable of...

yea i realised that. at 16 gpm (60lpm) that is far more then i was aiming for so even at 1/4 that 15lpm is far more then the standard ps pump. i was hoping the 2 stage would be an advantage by having a fast line pull until the winch comes under say 700psi of load then drops a gear so you have an ...

just got off the phone to a power steering specialist and was informed that the extra flow of a bigger pump wont damage the steering box as long as the pressure is kept as close to stock as possible so for the price of one of those log splitter type pumps i may as well try it out. the plan is to ...

any info on that i would be interested in doing a swap like that part time 4wd and pto box

thanks guys yea my power steering pump is gear driven and thats part of the reason i would like to have that same pump working the winch also so i dont have the problem of belts......

i am looking at installing a hydraulic winch to my 80 series have done alot of reading about how slow they are run off the power steering pump. so have been thinking about fitting a better flowing pump. the question i have is could i replace the power steering pump with a high flow pump and run both ...

yea thanks have read through that but thought there may have been some one that has actually done it.....