Greg has got them

http://www.offroadspecialties.co.nz/node/47

Try Greg at http://www.offroadspecialties.co.nz/

A brand new Rugged Ridge product is probably quite reasonable at the current exchange rates.

You don't necessarily need adjustable upper arms but you can do with stronger ones. The standard upper arm can collapse and cause a lot of damage to the driveshaft and transfer case when they break.

Build thread

http://www.ausjeepoffroad.com/forum/sho ... hp?t=97856

The website is http://www.offroadspecialties.co.nz/. It seems to be off line just now but keep trying. He is just jeep on Trademe and has a few listings on at the moment.

The website is still a work-in-progress, try the email address in this description. Description A group of Jeep users, owners and fans based in Wellington, NZ. Wellington Jeep Club is open to all 4WD Jeep owners. Our objective is to offer off-road trips for members, catering for both serious ...

There is a catch under the seat to release the backrest untill you can replace the cable. The cable is over $80 from NZ dealers. You could try and make something using bicycle gear changing cable.

Searched the wrong topic.

http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=27&t=30656

Is the Whanga rd open for driving?

What condition is it in?

Would a single vehicle get through alright?

I think you will find a double carden jiont in your driveshaft, Howie uses the front driveshaft from a Hilux to get the CV jiont.

Someone told me that they fitted an XJ steering box to a TJ abd it had a different ratio inside and it needed more turns to go lock to lock.

I thought the case people are trying to protect themselves from was one about a hunter whose fire started a forest fire and he had to cover the costs of putting out the fire. Maybe try a search around the NZ Deerstalkers website.

I just got a email about Yukon Spin free kits which are avaialable in the original stud pattern.

http://www.ringpinion.com/ProductDetail ... r_and_Axle

You would have to be keen, they cost $1421 US, even with 2 new wheel bearings that's a lot of cash.

TJs don't have any free wheeling hubs from the factory, they are connected all the time.

There is a kit to put FWH on but it needs a different type of wheel bearing and a change of stud pattern.

Looks like a Vauxhall Viva.

Fit some swaybar disconnects on the front swaybar. Run the softest springs you are happy with.

There is a self check for the instrument panel. Hold the speedo reset button in and turn on the key, each instrument should move through its full range in turn. That will tell you if the speedo is working.

I ran 32 in tyres on my TJ with a 2 in lift. Offset rims and adjusted bumpstops will help stop the tyres bottoming out into your flares. I have 33 in tyres with the same suspension lift and a 1 in body lift now. Sav at The 4x4 Centre in Nelson has a TJ with 35 in tyres and a 2 in lift but has raised ...

Thanks to all the ORE people who came along to help out today. We had a good number of marshals and recovery teams and the event seemed to run well.

Totally unconfirmed that the Hoff will be there!

For spectators 9.00 am

For marshalls, briefing at 8.00 am in the marquee

The MSR Deadwood Safari is on Saturday 8th January at 615 Whitemans Valley Road, Upper Hutt, Wellington. It is the second round of the national 4WD Trials series and will have the best 4WD drivers competing over 30 different “hazards”. It is being run by Valley 4WD club and they’ve pegged out the haz ...

Where did you get the maxtrac 12,000 lb winch from?

The wheel nuts have a sheet metal cover over them to cover the end of the thread, hopefully you have just spun that around. See if you can chisel it off and then should still be a nut underneath.

Wellington Jeep Club is holding a 3 day event over Labour Weekend 2010. It's open to all Jeep 4wd vehicles and runs of all grades will be put on. The Wellington area offers some of the best Jeep’n in the North Island, ranging from bush creeks to big mountain streams through to muddy bush-lined h ...

How desperate am I to tint my windows? This was even on ORE over the weekend.

Subject: Sure way to stop the flow of oil in the Gulf.
PUT A LARGE GOLD BAND AROUND THE FLOW PIPE. IT'LL QUIT "PUTTING OUT" IMMEDIATELY.

My subscriber issue hasn't arrived yet either.

It sounds like the air pressure switch isn't turning off. It is a round piece with two wires going into it and should be on the airtank somwhere.

was round at Pedros tonight working on the rally truck, as you do in the final week before a trial turned into a cluster faaark Pedro, you are too clever for your own good as the NCO would say................. "theres room in our sport for ABS pump operated pulsating wheel brakes, but just not yet ...

There is a relay in the fusebox under the bonnet for the fuel injection that can fail as well. There is an identical relay for the horn and if the horn works swap the relays and see if it starts.