Search found 563 matches
- Sat Dec 16, 2017 12:32 pm
- Forum: Nissan
- Topic: R50 TD27 Front Pulley
- Replies: 0
- Views: 1562
R50 TD27 Front Pulley
Anyone had issues with front crank harmonic balancer pulleys on a TD27 EDi? My truck decided it didn't like the drive belts while the Mrs was using it the other day. She told me that the lights came on the dash the previous day but forgot to tell me. But that's another issue GRRRRRR I put some more ...
- Fri Jul 29, 2016 10:09 am
- Forum: 4WD Parts
- Topic: FJ40 Bonnet
- Replies: 0
- Views: 825
FJ40 Bonnet
Does anyone in chch or close to here, that has or knows of a good bonnet for a FJ40?
Mateais looking for 1 to chop so a super charger and tunnel ram will fit through
Mateais looking for 1 to chop so a super charger and tunnel ram will fit through
- Fri Aug 28, 2015 10:09 pm
- Forum: Toyota
- Topic: 1KZ-TE PRADO vs 1KD-FTV PRADO
- Replies: 19
- Views: 22759
Re: 1KZ-TE PRADO vs 1KD-FTV PRADO
Peter- we bypass the factory coolers because when people tow stuff here, the AT fluid increases the coolant temp to a point where the motor cooks. The eternal cooler helps reduce the risk of the head cracking. We put the coolers in front of the AC condensors where there's plenty of room and they can...
- Mon Aug 24, 2015 12:55 pm
- Forum: Toyota
- Topic: 1KZ-TE PRADO vs 1KD-FTV PRADO
- Replies: 19
- Views: 22759
Re: 1KZ-TE PRADO vs 1KD-FTV PRADO
From memory only the RV doesn't have the flash bits. The VX and VX LTD has the down hill decent assistance and all the other bells and whistles. Might be some slight differences from the Aussie specs but will be pretty similar.
- Thu Aug 20, 2015 5:18 pm
- Forum: Toyota
- Topic: 1KZ-TE PRADO vs 1KD-FTV PRADO
- Replies: 19
- Views: 22759
Re: 1KZ-TE PRADO vs 1KD-FTV PRADO
An aftermarket trans cooler would be a good advantage. Get the factory cooler in the radiator removed/disconnected if you do. Do a search on here for 1KZ mods and improvements. There's lots of things to give you ideas. If you're only using it as a family wagon there's probably no point going to extr...
- Tue Aug 18, 2015 6:25 pm
- Forum: Toyota
- Topic: 1KZ-TE PRADO vs 1KD-FTV PRADO
- Replies: 19
- Views: 22759
Re: 1KZ-TE PRADO vs 1KD-FTV PRADO
All the CR (common rail) diesels have a fuel cooler from factory. Haven't seen a 1KZ-TE with DPF yet in my time with Toyota. Seats and seals is an ongoing issue with early KD's. The combustion gases can get past injector seats and the crud blocks the oil pickups. Pays to check the pickup through the...
- Mon Aug 17, 2015 6:33 pm
- Forum: Toyota
- Topic: 1KZ-TE PRADO vs 1KD-FTV PRADO
- Replies: 19
- Views: 22759
Re: 1KZ-TE PRADO vs 1KD-FTV PRADO
NO! and no. The DPF are only on import KD's, no KZ's had them.
Those Rav's have oil burning issues (we have replaced a heap of blocks and re-ringed so many more), plus they block their EGR systems very badly.
Those Rav's have oil burning issues (we have replaced a heap of blocks and re-ringed so many more), plus they block their EGR systems very badly.
- Fri Aug 14, 2015 10:29 pm
- Forum: Toyota
- Topic: 1KZ-TE PRADO vs 1KD-FTV PRADO
- Replies: 19
- Views: 22759
Re: 1KZ-TE PRADO vs 1KD-FTV PRADO
Heads cracking can attributed to quite a number of things. But mainly its a maintenance issue in my experience. IMHO leather is a waste of time. Marks very easy and is cold in winter and sticky in summer. A real pita as well to keep clean and protected. Fabric much nicer. The RV is bottom of range s...
- Tue Aug 11, 2015 6:09 pm
- Forum: Suzuki
- Topic: Seen on TM LJ50
- Replies: 0
- Views: 786
- Tue Aug 11, 2015 6:06 pm
- Forum: Toyota
- Topic: 1KZ-TE PRADO vs 1KD-FTV PRADO
- Replies: 19
- Views: 22759
Re: 1KZ-TE PRADO vs 1KD-FTV PRADO
I work for a Toyota dealership so I will tell you 1 simple thing - DON'T GET THE KD!! Upgrade to the 120 series Prado with the KZ engine. Or better still, get the V6 Prado. Cheaper to run, maintain, register and no RUC's to worry about. Nicer engine and tons of grunt. Cheaper to buy than the diesel ...
- Fri Jun 05, 2015 8:44 pm
- Forum: Projects / Mod's
- Topic: Offroad lights and WoF
- Replies: 6
- Views: 2839
Re: Offroad lights and WoF
There is nothing, yet, in the regs regarding any LED light bars. But NZTA is looking very closely at them. Australia has just changed their regs for these types of lights and it is most likely that NZTA will follow their direction. In regards to light bars, it depends on the light pattern outputted ...
- Sun May 24, 2015 2:08 pm
- Forum: 4WD Parts
- Topic: Toyota 1KZ-TE EGR Valve Removal Blanking Plates
- Replies: 61
- Views: 21943
Re: Toyota 1KZ-TE EGR Valve Removal Blanking Plates
The two versions for sale in nz from yota are pink and red. Pink is suitable for our old 1kzs, red is not (from the horse's mouth). Sorry old thread I know, but this info from zed is incorrect. I work for Toyota so can confirm the following regarding the Toyota genuine coolants. Toyota Long Life Co...
- Sun May 24, 2015 2:00 pm
- Forum: Toyota
- Topic: Any idea what's wrong?
- Replies: 10
- Views: 1618
Re: Any idea what's wrong?
Batteries are disconnected or a surge protector put on across the battery terminals to prevent electrical spikes from mig welder.
1 thing to check, is it actually getting full throttle travel?
1 thing to check, is it actually getting full throttle travel?
- Thu Apr 23, 2015 5:54 pm
- Forum: Nissan
- Topic: R50 Fuel Lift Pump
- Replies: 3
- Views: 758
Re: R50 Fuel Lift Pump
Cheers crash
I have got a low pressure pump that flows 80L/hr that I was thinking of using. Reckon that'll be OK? Have been thinking it may be too restrictive.
But I might just fit the aux filter anyway without the pump for now because I can. Piece of mind more than anything else.
I have got a low pressure pump that flows 80L/hr that I was thinking of using. Reckon that'll be OK? Have been thinking it may be too restrictive.
But I might just fit the aux filter anyway without the pump for now because I can. Piece of mind more than anything else.
- Tue Apr 21, 2015 6:34 pm
- Forum: Nissan
- Topic: R50 Fuel Lift Pump
- Replies: 3
- Views: 758
R50 Fuel Lift Pump
I have heard that adding in an electric lift pump can help reduce chances of the electronic injection pump cavitating and failing. I'm interested to find out what was done exactly before I fit in a pump I have managed to find. Am wanting to fit an auxiliary fuel filter at the same time, so have scor...
- Thu Mar 26, 2015 8:04 pm
- Forum: 4WD Parts
- Topic: WTD: Snow Chains
- Replies: 3
- Views: 873
Re: WTD: Snow Chains
keithal wrote:I have a pair here
Brand new never been used
Wanting 180 ono as I paid over 200 new
Could be keen on them chains there keithal.
PM on its way to you.
- Sun Mar 22, 2015 6:19 pm
- Forum: 4WD Parts
- Topic: WTD: Snow Chains
- Replies: 3
- Views: 873
WTD: Snow Chains
Looking for a pair of heavy duty type snow chains with ice breakers to fit 31x10.50R15 wheels.
- Sun Mar 08, 2015 2:36 pm
- Forum: Tyres
- Topic: opinion on tyre choices
- Replies: 5
- Views: 1625
Re: opinion on tyre choices
I have a set of the SL366's on my R50 Terrano. Very happy so far. Wearing well. Good for the 4wd trips I do in the truck. I'd recommend them to someone on a budget.
viewtopic.php?f=5&t=38591&p=416996&hilit=sl366#p416996
viewtopic.php?f=5&t=38591&p=416996&hilit=sl366#p416996
- Sun Feb 22, 2015 5:22 pm
- Forum: Tyres
- Topic: WTD: 15X8 Rim
- Replies: 5
- Views: 1523
Re: WTD: 15X8 Rim
Got a rim coming.
Cheers for the heads up Kiwi_Terrano
Cheers for the heads up Kiwi_Terrano
- Sun Feb 22, 2015 5:09 pm
- Forum: Tyres
- Topic: WTD: 15X8 Rim
- Replies: 5
- Views: 1523
Re: WTD: 15X8 Rim
Sweet as.
Will do. Cheers.
Will do. Cheers.
- Sat Feb 21, 2015 9:04 pm
- Forum: Tyres
- Topic: WTD: 15X8 Rim
- Replies: 5
- Views: 1523
Re: WTD: 15X8 Rim
You're probably right. Just a generic 4x4 rim. Colour doesn't matter. I painted the rims on the 'Rano as it was anyway. Rusty white didn't appeal that much. :lol: Just after same sort of rim as I have on the truck already, to use as spare. I thought someone might just have a single rim floating abou...
- Sat Feb 21, 2015 5:04 pm
- Forum: Tyres
- Topic: WTD: 15X8 Rim
- Replies: 5
- Views: 1523
WTD: 15X8 Rim
I need 1 rim for a spare wheel on my Terrano. The same as these hopefully. http://i964.photobucket.com/albums/ae121/CEMEMOTORSPORTS/4WD/DSCF0739.jpg Same pattern as Landcruiser, Hilux not IFS. Unsure of offset, markings only say 15x8 and made in China. I haven't measured it yet either.
- Tue Feb 03, 2015 9:59 pm
- Forum: Drivetrain / Suspension
- Topic: KZN185 Center Diff Won't Lock
- Replies: 12
- Views: 4351
Re: KZN185 Center Diff Won't Lock
Electric actuator on transfer most likely seized. Very common with them.
- Tue Jan 20, 2015 5:42 pm
- Forum: Toyota
- Topic: Prado radiator into surf, but quality sus?
- Replies: 18
- Views: 3569
Re: Prado radiator into surf, but quality sus?
floatingkiwi wrote:Because the surf rads are only thin 24mm single core ones where the prado ones are twin core and thicker. better cooling. My existing rad is fine, just getting a bit warm in summer, let alone towing. Mind you I'm over cautious as well.
The rad I put in my bros Surf is a 36mm core.
- Tue Jan 20, 2015 5:39 pm
- Forum: Toyota
- Topic: Prado radiator into surf, but quality sus?
- Replies: 18
- Views: 3569
Re: Prado radiator into surf, but quality sus?
BNT can source Fenix radiators, and they aren't to badly priced.
- Tue Jan 20, 2015 5:38 pm
- Forum: Toyota
- Topic: Prado radiator into surf, but quality sus?
- Replies: 18
- Views: 3569
Re: Prado radiator into surf, but quality sus?
There are 3 different sized radiators for the KZN185 Surf (so I found out).
I just had to get 1 for my Brothers truck right before Christmas. Sourced it from A1 Radiators here in CHCH.
I just had to get 1 for my Brothers truck right before Christmas. Sourced it from A1 Radiators here in CHCH.
- Tue Jan 06, 2015 3:01 pm
- Forum: Diesel Engines and Modifications
- Topic: Pre-turbo EGT's.
- Replies: 12
- Views: 3952
Re: Pre-turbo EGT's.
Have a read of Stu's thread. We fitted the EGT gauge recently to his KZJ95 Prado.
viewtopic.php?f=46&t=42494
viewtopic.php?f=46&t=42494
- Fri Dec 19, 2014 10:21 am
- Forum: Projects / Mod's
- Topic: fj45 rat rod (ish)
- Replies: 512
- Views: 153089
Re: fj45 rat rod (ish)
Bloody great work there Heath.
When it comes time for your glass to get sorted, try this fella.
Precision Autoglass 0800 582582 Tim Huffadine
He is very good at his work. We use him quite a bit through work.
When it comes time for your glass to get sorted, try this fella.
Precision Autoglass 0800 582582 Tim Huffadine
He is very good at his work. We use him quite a bit through work.
- Tue Nov 11, 2014 6:43 pm
- Forum: Toyota
- Topic: 1kz blocks are they all the same?
- Replies: 3
- Views: 960
Re: 1kz blocks are they all the same?
Blocks are the same.
Price a new short block from Toyota. You might be surprised in the price compared to a rebuilt block.
Price a new short block from Toyota. You might be surprised in the price compared to a rebuilt block.
- Thu Nov 06, 2014 9:22 pm
- Forum: Nissan
- Topic: Dump pipe flange, from where?
- Replies: 8
- Views: 1226
Re: Dump pipe flange, from where?
http://www.autobend.co.nz/downloads.html
Try Autobend. Most exhaust places buy their flanges from them.
Try Autobend. Most exhaust places buy their flanges from them.