sweet as

I got a narrow one here in chch 021 5 444 57 . can have with or with out axles, cheers chopper

I got a couple floating about some where

turoa wrote:

Chopper01 wrote:1994 vr so thats the year before the ecotec so it cant be anything to do with a imbolizer as they dont have them like the ecotec

Actually yea they do..... They require a bcm or a bcm bypass to run

Yea your right there , I have just ordered a memcal with no vats so that will get it sorted .

yea they have a common positive on all 6 of them , then 3 have a grey wire and 3 have a blue wire that is also 12v but when the ecu tells it to fire they drop to earth , I have had a earth wire going from the battery to the grey wire and can get that set of injectors to fire manually by tapping the ...

Hi there I have just put a 1994 vr 3.8 into my hilux but I am having trouble getting the injectors to fire , I have spark and if I put a little gas into the throttle body it will fire then run but will stop , I have had them working twice but only for a couple of squirts , any advice on what I am ...

there is some good spots up the selwyn river to sight in a rifle

southen 4wd ,by the old jade stadium

have a talk to matt4u as he has done that conversion and would be able to let you know

done

tuk wrote:

rokhound wrote:

tuk wrote:every time i take the plugs out they are dry and black as..

snap

does that mean plugs?

yea man put a set of hotter plugs in it , its a good start point

I have thought of putting a switch in line of the fuse box into the cab and use a unused switch on the dash to isolate the power , also what I have done in the past is put a red handle kill switch "like on the race cars" in line to the starter motor and just pop the bonnet and take the key out when ...

love it

did you try blackwoods

how straight are they , were they spun in a lathe

I have a puller you can borrow 021 5 444 57, cheers chopper

throw some coon's in the back and rears up front to start , thats the cheap way to do it just depends how much you want to spend But in doing that u need extendend front break lines cross over steering. Drop front leaf mounts down 30 or so mm extended front and rear shackles. Longer shocks. Im ...

throw some coon's in the back and rears up front to start , thats the cheap way to do it just depends how much you want to spend

are they in halswell

I can help you out give me a ring 021 5 444 57 cheers chopper

hosehustler wrote::lol: That sure was funny when those beers were falling out one by one and smashing on the rocks

Bahahahaa yea I remember that like it was yesterday. Bought back some great memories seeing all the old pics

I can get you a bare cab if your in chch

good shit nib looks mint , all that hard work looks like it has paid off

you need a push pull box Im sure they are all the same , I have one here in chch where are you

.

dont piss about pete and just chuck some rears up front , I can help you with the steering arm issues it will not be certifable but will still work mint and you will get alot better flex in the front not to say your aproach angle will be a hell of alot better , take out a coupple of leafs and bring ...

ok then we dont need it that much

X2 I can help out where needed as I dont think my toy will be going by then

I'll give you $25 for it but that will include postage to chch , I take it she has the full wiring dirgrams and pin outs in it , cheers chop

flick me a pm and I can help you and have a look and see what you need as have a few scraps of pipe floating around