I don't think it's the controler but I should be able to borrow one to try,if it's not that are the soleniods or soleniod the only other thing it could be and if so what are they worth?cheers.

Would I find that in the main built in box above the cable drum?

I had a mate who was controling my winch on a recovery when the remote lead got caught in the cable and shorted the wires,we fixed the remote lead but now it won't work the winch at all .Is there a safety fuse or something in the winch or will it be more serious like the solinoids are fryed ??The ...

pinion to gear clearance not set correctly? This sounds normal to me..have a read of the manual that came with your locka. When cornering you should "do so under slight positive acelleration" If in doubt RTFM I got the lokka off trade me already in a diff head so I don't have a manual for it.I then ...

Hey everyone,I just put my diff head back in today with my lokka in it and I noticed that after everything was back together if I grab the drive shaft and turn it I can move it about 20-25mm before it locks up and the wheels move,when I took it for a drive it was really noticeable when backing off ...

Just putting a auto locker in the rear of my truck and I'm interested in what different oils people use in thier auto lockers.

I'm just wanting to know everyones ideas on waterproofing Toyota v8s.
I don't do many deep water crossings but I do go through watery mud bogs and small water holes ect.
I,ve looked on here for info but I could'nt find anything discriptive on what to do on these engines.

DIFF NOW SOLD!

I have a lock-right now, and it's goin in the back,and might try one of those cheap air lockers in the front later on. cheers for everyones help. is it going in your hilux in your avatar?? let me know how it goes, got an ln106 and looking at putting one in as the factory lsd is crap. Yep goin in ...

Sweet az,I got a set of 33s offered to me which I'll use now,gearing seems really good how it is without going any bigger.(for a while anyway)

I have a lock-right now, and it's goin in the back,and might try one of those cheap air lockers in the front later on.
cheers for everyones help.

There are about 70 million possums in NZ - according to http://www.kcc.org.nz/pests/possum.asp 3 million is just harvesting or farming - not eradication In addition any industry which is setup to use possums will create groups of people opposed to their eradication. They may even start farming ...

It's on Trade me at the moment.

http://www.trademe.co.nz/Trade-Me-Motor ... 900909.htm

I paid $300 for it last year but reserve is $150
Can probably work something out if someone wants it.
cheers.

I HAVE A 4.88 DIFF HEAD FOR SALE IN VERY GOOD CONDITION

ALSO WILL HAVE 4.88 RATIO RING AND PINION FOR SALE IN A FEW WEEKS

1.95m on 31s.
35s and longer shackles still to fit.

1080 is not what NZ should be using,the rest of the world does'nt! I know of dogs that have been killed by it and I have seen birds and other wildlife lying dead next to pellets of it. Here is a article I found the other week. 2009 February/March issue of NZ Outdoor HUNTING, page 12 Government ...

Anyone know how to make 35s fit on the front of a 1990 Hilux ute?I have a 2" body lift and 2" spring lift.Is there a way to move the diff foward relitively cheap?Can't run cross over steering because of front sump 1UZ.cheers.

I have a 1989 2.8L diesil motor with a surf turbo fitted and tuned (10psi) 214,000kms,front mounted intercooler and 2 1/2" exhaust for sale complete with G52 gearbox,flywheel and clutch.Also comes with a exhaust temp gauge,boost gauge and oil pressure gauge with all senders.Can be test driven untill ...

Tikka T3 Lite 270WSM Lee Enfeild 303-25 Baikal suppressed 30-06 Optima O&U 12g PSE X-Force bow YES!! the Queensland calibres are sometimes inspired, I had a 303.25 for a while, a No.4 with 25.5 inch barrel. shot like crazy too! Didint have a chronogarph at the time, they were available, but just a ...

Tikka T3 Lite 270WSM
Lee Enfeild 303-25
Baikal suppressed 30-06
Optima O&U 12g
PSE X-Force bow

Thanks guys for the great feedback keep it comin,how much difference did anyone notice after fitting one compared to there old one?If you get a wheel or two (hopefully no more)off the ground does it lock both of them together or distribute the drive to the one still on the ground?Im very new to ...

I just turned up the 2.8 pump 1/2 a turn on my one,seems to be fine,install a Exhaust Gas Temp gauge tho,if it runs over 550c for to long you will have motor troubles.

I'm thinking of buying a lockright diff for my Hilux and was wondering what people who have had them installed think about them.Also would it be better to fit it to the front or the rear?

I was very close to buying a chinese winch but desided to wait for little longer and get a good one.Trade me is a good place to watch for them,I ended up getting a brand new Warn 9000 for $1200,only about $400 more than a chinese one.My opinion is when it comes to winches you do get what you pay for.

I'd drive a hilux with a 3L in it first,then see what you think about them.Slowest motor I have ever had!Uses a bit of diesil aswell because you have to keep the go pedal pinned to get it to go anywhere,I drove a couple of them just to make sure it was'nt just mine,but no all the same.I turboed mine ...

Just done mine 3 weeks ago,very worth wile project.I left the compression standard and run 10psi.The surf turbo(ct20) and manifold bolt straight on,I used a four way block that came with my oil temp gauge and put it in where the oil pressure sender is and ran the alternator feed off that,and used ...

Trade me has them,just brought one for my lux,auto gauge $130 with all the fittings,works perfectly.Tap it into the manifold before the turbo for the best reading.If the needle gets to 600c lift off!