cheers thought I'd put it up here anyway you never know what people are looking for.

hey guys Ive got a front diff head 3.7 ratio from a vx80 crusier was told it was a high pinion wanting $200 for that and have a rear drivers side(longer) axle to suit a vx80 full floating diff wanting $120 for that.
cheers
Darren 0211645663

Hey guys if you looking for someone to wire up you project whether it be a engine conversion or a full rewire give this guy a call he can do it all.

Simon 098172966

SOLD

Hey they in Auckland 0212948591.I have never had them running they came with a range rover I bought.As Is Where is

Hey Ive got two rover v8s for sale
One has one head removed and the other is complete.They both have their carby setups and exhaust manifolds and one has the electronic ignition out of a 86 rangie with it.
$300 for both
0211645663

okay a toyota gt4 (3sgte) flywheel bolts straight on to the 1u and there are h/d clutches available for these.these flywheels cost about $150.My friend who has done alot of these 1u conversions has found that the one with the link management actually runs worse that the one with just standard ...

Right.Im putting it up to a supra box and just using it as a 2wd.The plate came off a 1ufze v8 and 2wd hilux 2003 combo(installed in a 88 ).apparently these will fit supra/hilux boxs.Most wreckers in auckland sell these motors for around $1500 with wiring/airflow meter etc.Im not to sure if you ...

hey guys ive recently had a adpator plate made which allows the 1uzfe v8 auto bellhousing to be used and bolted to a hilux or supra type gearbox if anyones interested i can get these made by the guy who made mine. cost $250. pm me if anyones interested.these made from steel

hey guys ive recently had a adpator plate made which allows the 1uzfe v8 auto bellhousing to be used and bolted to a hilux or supra type gearbox if anyones interested i can get these made by the guy who made mine. cost $250. pm me if anyones interested.these made from steel

front monroe shocks$100 Front drive shaft$50 Rear drive shaft$50 Complete Rear diff$250 Complete Front diff$250 16" 3spoke wheels with 205 tyres X5 ,needs paint$400 Flywheel$100 Clutch$80 3.5 engine with one head removed,zenith carbs needs rebuild$180 3.5 engine complete condition unknown su carbs ...

Yea it looks like i'm going the Toyota route on a diff
Cheers

Okay I'm Pulling the springs out this weekend make me an offer!

True I'm in Auckland but im sure we can sort something,i'dont think it'l matter if its coil or leaf because i'll be making new mounts for the links.Is it LSD,How much you think you want for it ?:D .Also another question how do the handbrakes work on Toyotas because I need to get awayfrom using the ...

Hey
Keen on a toyota diff
It has to be 6 stud,lsd, drum or disc ,have head in centre,1500mm from flange to flange ,have a ratio between 3.9-4.3
Cheers

Well I come to a problem in my project.Since im ditching the rover v8/gearboxand transfer box in the range rover and just making it 2wd I have just found that the rear diff has the diff head offset so its inline with the transfer box output.Because Im using toyota v8/suprabox it will all come ...

Cheers, I Think I'll leave the front axles and diff head in there and pull it all outnext year when i change the front suspension.For the toyota v8 setup theres 3options I know of,That guy in waihi makes a bellhousing that will bolt the v8 to the box or you can find an adaptor plate or my friend who ...

Cool I'll try hyper tyres and see what they got

Cheers
Darren

Im in the process of pulling it all out so il let you know once ive done it.How do you get the front axles out??,Im going to run a toyota v8/supra 5 speed combo so it isn't goin to drive the front axle,ive been told that you can remove the front axles and head and the front hub will hold the drive ...

Yea im looking just for low profile tyres ah,just thought some one might know some in the pipe line somewhere,Yea im gonna do my rangie up cos every one low riding jap utes so i wanna do a range,but dnt worry I still got A S2a LWB thats gonna be left for hack duties,possibly looking for some ...

I will have a set in a couple of months cos I'm pulling them out and putting some harder ones in I'll let you know when there availible and see if your still interested.

Im putting some 20" wheels on my 85 range just thought someone may know of a place to get them cheap.

Hey mate ive got one check your PM

Hey mate i got one check your PM

5 speed box $500 Transfer box$500 Complete front diff$400 Front drive shaft$100 Rear drive shaft$100 Complete rear diff$400 Flywheel$150 Clutch$100 3.5 engine with one head removed needs rebuild$200 3.5 engine complete condition unknown$300 Altenator$60 Starter $40 Full exhaust System$50 Radiator ...

Any body know of any 20" tyres

5 speed box $500 Transfer box$500 Front drive shaft$100 Rear drive shaft$100 Complete Rear diff$400 Complete Front diff$400 16" 3spoke wheels with 205 tyres ,needs paint$600 Flywheel$150 Clutch$100 3.5 engine with one head removed needs rebuild$200 3.5 engine complete condition unknown$300 Altenator ...