Righto. Man at Toyota said yup, got a single mass flywheel and clutch that will bolt right in no problems. Even comes with the different bolts required to mount the flywheel. Here's hoping he knows what he is talking about - my biggest concern is as shown below https://lh5.googleusercontent.com ...

Yeah unsure of what the flywheels are off - to quote a wrecker on an auction site: Do you have a dualmass or solid flywheel for a 3L engine? If dualmass, what conditon are the springs and plastic keepers in? If solid, what size is it? Cheers. dual mass are rubbish i just throw them in the bin, have ...

Quick background. 92 Hilux, daily driver. LN107 with 3L manual. Jap import, IFS. Dual mass flywheel has thrown a spring. Currently have the engine hanging by a thread in my shed. It looks like a billion dollars to replace the dual mass one, so solid flywheel looks the way to go. Research shows that ...

you lucky bugger.I used to have several places down here to shoot on but am down to 1 main place now, 1.5 hrs away in the wairarapa .just bought a new 223 with suppressor and am itching to get over there but cant get enough free time.O well xmas is coming might camp over there for a week and slay ...

Bump

Now on TardMe, $1 res.
http://www.trademe.co.nz/Browse/Listing.aspx?id=419925502

Set up a way of locking your wheels to your driveway? i.e. have a big screw in 'eye' on one side of the driveway, and slip some chain through the wheel, and back to the eye, and padlock it? Or a pole set in the ground next to the driveway could work - or even a fencepost? May be easier than ...

i reckon putting a padlock or similar through your handbrake lever is the go kills to birds with one stone. That's not a bad idea at all - even the traditional dash-board style 'turn-and-push' would be fairly easy with a sleeve the length of the shaft that could be locked around it once engaged ...

Nice one. Where did you the the LED's and for what cost?

muddyhilux wrote:is that the one where ya towed it back?and i think plywood was mentioned? bloody good effort i say

Cheers - there were a few bits of plywood, and a large G-Clamp modified to become a towing attachment to a $40M helicopter...

Bloody good thanks. Did a few recoveries using my LAV-R, including one of the LAV destroyed by an IED, and another of an Apache helicopter which made rather big news in the US apparently, certainly within their military. Might have a picture or two of that somewhere...

Hey Sig, I sure am. And as you can see, selling a few bits I brought home thinking they would fit...

'Brand new' set of Lovells Gas Legend Shock Absorbers. 64612525 - Rear Gas Legend 36mm Shock Absorber - from their catalogue. http://www.lovellsauto.com.au/docs/cat_4x4spring11.pdf Will fit a range of vehicles, but apparently not a LN107 Hilux, hence the sale. Eye to eye measurements - Full ...

Got a set of brand new OEM brake pads for sale. Brought them home with me from overseas thinking they would fit my LN107, hence no packaging. Mr Toyota will hurt you to the tune of $100, I'm looking for about $50 to offset the costs of buying the ones that did fit Happy to drop off in the Manawatu ...

I wouldn't use a VSR with a winch, as full winch load (300+amps) can be drawn through the VSR. from 1 battery to the other as they try and exqualise. this = melted VSR or Winch or Battery or All. BEP Marine (a Kiwi company in Auckland) make a VSR they call a "Voltage Sensitive Battery Switch" http ...

I came across a set of Lovells Rear Gas Legend 36mm Shock Absorbers, (their part # 64612525), for the right price (read 'free'). Having a look in their catalogue, I couldn't find a LN107 specifically, however for nearly every other Hilux around the same year, and specifically those that were torsion ...

no idea what forum to post this in but... I am looking for someone to take a look at a Unimog which is in CHch for me. It does have some issues I know of but keen to get a proper look done of it if poss. Remuneration method up for negotiation. tia W 1700 or 1300? edit cause I'm overseas and the ...

The bullbars and the side rails have gone, the tow bar and the rear step are still available if anyone wants them.

I'm really not sure, but if you measure your tray and post the details, I'll pop outside when I get home and see how close it would be.

george

One fiberglass Crown canopy to fit a Navara Double Cab for sale. It has sliding windows on each side, without mesh. Double sliding windows on the front - again without mesh. It also has a vent flap that seals closed on top (not a spinning one). Has quite a few scratches, but nothing that affects the ...

I have a set of AliArc Bullbars, complete with running boards and side bars for sale. There is also the rear bumper and a tow-bar. This all came from a '96 IFS Double Cab. Make me an offer - I know what they're worth as scrap so if it's better than that, and you're willing to pick up from Waiouru ...

I am Curious, George, (sorry. {NOT} about the dreadful pun) wonder what cost? would be practicable for me to change to that better device, allowing a substantial revers current for starting? Or just install a manual isolating switch in the cab, so if the service batt DID (and bloody well does) go ...

To cut a long story short, I'm looking after a car for a mate who is overseas. http://homepages.slingshot.co.nz/~bjalex/Rusty%27s%20Car/Gallery/ Yeah, it's not a 4wd, but autos are autos, aren't they? Anyway, When getting it out of the shed yesterday, it lost drive. It was in gear, and then just ...

and completely impractical for the sort of places you'd take a quad in NZ.

Our Singaporean friends are over at the moment with their big guns - 155mm self propelled, and the Primus SP1 - 155mm tracked artillerly piece - can fire 7 rounds and have them all land on the same target at the same time - now there's a clever cannon.

Yup, you read right. We're after a low pressure stainless cylinder with wetback fittings. It's no drama if the element doesn't work any more as there is no power anyway. Size is of no real concern either, although an industrial size one would probably not fit in the small hut. It really does need to ...

in referance to licences do you have seperate ones covering shotguns and firearms (ie a lee enfield 303 bolt action) or do they come under 1 licence. lee We have an interesting license system here, but for the majority of firearms (.22's, centre-fire hunting rifles, shotguns etc) they all come ...

Hi Lee, At first glance of this web site http://www.police.govt.nz/service/firearms/importing.html I couldn't find anything specific to air rifles but you may be able to find a link to someone who can help you directly at the NZ police firearms division. Currently to my knowledge no licence is ...

Help make this one a success by listing your stuff for sale. The worst thing that can happen is that every one sits on their hands waiting for it to fail.

http://www.gunstuff.co.nz/index.php

I'm after a new drivers mirror for a LN107 Hilux. It's electric with the chrome back and black plastic surround.

The one on there currently has a small bullet hole through it...

Where would one find a "fitting guide" as such for rancho shocks? Just to work out if they would fit etc.