I realise this is an old thread but did you ever sell the transfer cases for a 720?
Thanks

hi there, youve put in some good work here mate, looking foward to hearing about the safari gearbox conversion and SAS, ive been thinking a bit about a pig box behind my td27t if i continue having troubles with the front diff, i did a sas on my ute but flipped a beam instead to go with std box, but ...

yeah definatly the same ratio both with the 1st ones and the second ones were a matching pair from same truck then into mine, and no not dumping clutch at full note either, i have noticed the break pattern on the teeth is rather interesting, if this helps im not sure, the pattern the teeth are ...

the 1st diff i blew i had set up my self with the factory specs and a solid spacer, had my uncle check it (mechanic of 55years) and teeth markings were good in his opinion too, 2nd diff head was strait out of one and into another i checked backlash and markings but didnt undo anything, 2nd one when ...

hi again guys, thanks for all your replies, have been away for a couple of days 2wding haha, and talking with mates about the time the diff blew and being reminded of a few bits of the day i forgot may have helped,, before going i rechecked the allignment of the housing ect the best i could, i was ...

And rokhound, good thort but na in my opinion i drive resonably carefully to be nice to my drive line and also i believe that any idiot can get up a bank or thru a hole at 30kph but i prefer to use angles, skill and my articulation to get me places,

cheers for that guys, think the second one did go bang while in reverse, and the 1st i was bordering on getting stuck in soft gravel, so going back and ford but cant say i remember exactly when it went bang, i have had the thort of a safari or cruiser diff, and now its just a case of how i want to ...

hi guys, well after a long time my project nissan has finaly been driving around for the last few months and beating in new springs nicely, however i started with 4.3 ratio diffs std lux 8inch in back and prado high pinion in the front, went fine for a good 2 months of river/sand/mud/shingle beach ...

hi there, thanks s, i fully understand the possiblly hydaulic theory here, and will try for sure next time, however this time i was in a rush and when i rang nissan for a poart i asked the parts dept for advice and they said to put a cut 7/8 of the way thru each side and pry out with a screw driver ...

yeah thats what i thought, nylocks are the way,

is there even much difference throughout the different surfs? or are they pretty much same lenght bolts through the years?

thanks guys, yeah ive done a few before but not a surf, still easy enuf to sort out the standard sutff, just wanted to make sure i had enuf of the right sized bolts on hand as im a little way from town so being organized is easyer, thanks for those measurements, just out of intrest who here has gone ...

hi guys, just wondering if any one knew the bolt leght and thread for and 88 urf 50mm body lift, have done a few body lifts before but trying to keep this one on the road untill all parts ready to get it done,, even if some one knew the standard length and thread i can work the rest out, cheers ...

hi there, i have a navara that i have done a solid axel swap on, and also needed a passengers side drop, i was looking at the jeep and range rover axel but being 5 stud and probably more expencive parts, i wasnt impressed with either idea. toyota diffs are easy to find and have the Lockrite ...

So i thought it was terrano gearbox time again, as i was getting some bad sounds, so rebuilt the old 1 then took this one out to find out it was the clutch plate falling to peices and that explained my noises,, so im getting ready to fit the new clutch,,,,,, and then realise the bush is worn enough ...

hi all, just wondering if i could get those diargrams sent to me aswell please "long" can get me at skid4x4@hotmail.com also "madterrano" where abouts in the country are you, if youd be keen to hook us up with a kit?? im in chch, im probly going to do the heavy duty front bearing but the rest will ...

yeah mine did that for about a week before it blew a ball bearing out the plate that blots around the input shaft, when my navara 1 blew years ago i brought a rebuilt 1 which for a week now is in the terrano, but will be rebuilding this box myself this time, waitng on a parts box to arive then im ...

hi there all, interesting about the transfer case oil,,, just checking,, does this apply to the manual box aswell, cheers