Hi, wouldn’t mind a sliding rear window in my 2003 hilux.

Does any window from earlier models fit or need one for a similar year to mine?

Thanks

Should add that my ute is a manual, prado was Probly auto if that makes a difference?

I’ve got a VZN167 Hilux and there’s some extractors on trademe to suit a 90 series Prado, does anyone know if they will fit?

Pretty sure the hilux and prado chassis are a bit different, torsion bar vs coil over?

Thanks

Anyone got an flat deck lying around they want to get rid of? Want to put a flat deck on my 2003 double cab hilux. Can modify/repair but it’ll be cheaper to start with something rather then start from scratch.

I’m located in Dannevirke but could travel.

Thanks

Hey guys, I brought a new hilux recently and it’s got a set of 5x 265/75/16 Mickey Thompson ATZ P3 tyres on 16” alloys in very good condition (4x be atleast 90% and the 5th is brand new) I want to swap for a set of 32 or 33” mud tyres on rims, either 15x8 -22 or 15x10 -44. Let me know if your inter ...

Appreciate your reply, very helpful, thanks.

I didn’t realise they were torsion bar front, just assumed they were struts like a 185 surf. Good food for thought as I like the way my current hilux drives on road (and it’s got half a million kays on it!)

Anyone have any experience with the v6?

Hey, Looking at getting rid of my 05 Hilux diesel and replacing it with the previous model v6 or 2.7 petrol. The model code is either vzn167 or rzn167 correct? Is an extra cab v6 an option or just double cab? Any big pros or cons with these? Things to pay attention to when buying? Also what about ...

philip121 wrote:Why don't you put a diesel in your jet boat/

Cos he wants his jetboat to have power and throttle response!

Hey guys, looking at moving my hilux on, I want to get an extra cab petrol ute. 2005 Hilux, 4wd, SR5, Double cab She’s no beauty queen, rough round the edges. Was an ex forestry ute. Has a wof and will have a rego when sold. 500,000kms, about 200,000 on the motor, have a receipt for the engine r ...

I got it repaired but would like to use it as a spare only, have you got one?

Thanks for the offer mate, I’ll pass tho, I’ve replaced the tyre with a random spare I had lying about for now, ideally I’d like to find one dynapro in the future to replace it with so they all match again. Might get the one with a hole repaired for a spare because it seem like a waste to throw it aw ...

Put a hole in the side wall of my tyre on Friday, wondering if anyone’s got a 31x10.5x15 Hankook Dynapro MT laying about with reasonable tread?

Thanks.

What sort truck/engine is this on?

Hey, I’ve been doing research on the same thing for my 1KD hilux. Have a look at this: https://www.berrimadiesel.com/oil-catch-cans And https://www.baileysdiesel.com/shop/universal-catch-can-kit-suit-makes-models/ I’m going to get one for my truck and then clean the intake etc and hopefully it stays ...

I buy all my gasket sets from ACL because work uses their industrial gaskets. I like them and are cheap thru work. Just my 2c

Hi, recently got my hands on a 1KD KUN26 hilux. Looking at a few adaptor options for different engines and there’s 2 different input shaft lengths for the R151F gearboxes. Can anyone confirm that 160mm input shaft is from a 1KZ hilux, Prado etc and 190mm is what will be in my hilux? Most adaptors w ...

Yea I did think about one of thos but way out of my price range. I liked thos tritons too, even the new 4d56 seems like a good engine, But I ended up getting a good deal on a 05 hilux with a 1KD engine, gees they arnt a powerhouse! Big change from a 6 litre v8. Like the truck itself, just the lack ...

Yea heard really bad things about the zd30 motor.

Thanks for your input, given me some food for thought.

I’d love a Ute like that Andrew! Cheers crash, good to know. Took a 70 series cruiser for a drive yesterday with a 1kz and manual, definatly not for me, I’d get frustrated with the lack of power. Just drove the 70 to see what that engines like. Now I’ve been looking at 2000+ hiluxs with the 3rz 2.7. ...

Gidday, I’m looking at getting a 2000+ ute soon and I’m after people’s thoughts on what’s good and what’s not. 4wd obviously, I want to be able to lift and put 33s, and a bumper of some sort etc so want to avoid something with obvious flaws (eg the weak front factory earlier terrano steering, or brea ...

$120... good for a trailer.

Never dyno'd it. Kept up with a trundle truck full of tools spares etc with slipping clutch in 3rd 4th, That was 200kw. My pumps a 12mm 1hd hybrid. Turbo nozzles more crack pressure shimmed in. Modded intake , cooler, airbox 4" to turbo inlet, Standard twinscroll cat 3126 turbo think its an s200 ...

Anyone want them for $150? $75 per tyre/rim is cheap!

I'll put them on trademe next week if no1 wants them.

2 GT radial savero at tyres on rims for sale.

Good tread, 9mm in the centres.

6 studs wheels. Tyres would pronly suit Suzuki or the like.

$200 Ono

Prefer pickup, Dannevirke area.

Thanks

Awesome stuff! Looks like it goes really well. Love how far into the red line it revs! :lol: That's not even the limit on that engine either. Lol redline on the original dash that the motor came from was 8500 lol. Holy shit! That's really singing. Can't wait to hear it wide open in the mud! Keep ...

Awesome stuff! Looks like it goes really well. Love how far into the red line it revs!

Thanks for the info, will have to see if I can track down one of thos cars for parts.

Keep up the good work. Trucks looking really good!

Awesome stuff mate, you don't piss around!

Post a video when ya got it up and running, bet it will be fun even without boost.

Is 180kw at the engine? A factory rating for that engine? And how does that compare to a 3.5 pajero?

Cool thanks, will do more research into changing to thos cams. Read a lot on ozzy forums and they always talk about changing cams to Magna/diamanté cams but a lot of what they deal with is sohc and I'm unsure what they are referring to, different spec cars sold to different country's etc. Yep I've ...

Also do you have any info on that engine? Like the year etc? Reason I ask is my 3.5 runs out of puff at about 5500 rpm yet the rev limiter is at somewhere just over 7000. The cams from the engine you have might be different and might make power higher in the rpm range which I'd like, and drop ...