be very careful with Dyneema when it gets a bit old. It can still appear to be in good condition but it can just fail and break. I have used it up to 22mm which has a reasonable SWL but it can fail. You can at least see wire and other fibres failing. Dyneema is good but it does have its down side ...

If it doesnt work dont worry as mine didn't. they are sometimes disconnected. It is supposed to be a hand throttle. It is a pull and twist to lock type.

one thing I have done is layed a short piece horizontally along a couple of layers below the top layer. this stops the top layers sinking into the lower ones. Its a real bummer to get it out of its been under very heavy load. You dont need to use Dynema as thats very expensive. Any rope will do but ...

Do you still want an LPG unit? I have an Impco system quite old. I will have to find it if you are looking it came off a 283 chev that I had. Worked well on that.

thats a common fail dont put a 2nd hands one on

Thanks guys mine has a hot idle of 25psi so guess it is OK

oops 6 ply

Hi yup they are 700 X 16 and 5 ply Price is what ever you want to pay plus a bit. I have been out of 4 wheeling for many years and they have been sitting in the dark its now time for them to go.
txt or ring me on 0272459395 if you want to talk.

Does any one know the hot oil pressure range for the above motor in an early 3.0 ltr diesel motor? Also what are the usual problems with this motor? Is it the oil pump or the bottom end bearings that can cause a low pressure? Thanks.

I have some SAT 700 X 16" Suzuki standard wheels and tyres. On tyre still has the little tit bits from brand new and the other 4 have the working edges bitten off bit from rubbing on the body or springs> any one want to but them. 0272459395 Steve

Hi I have a transfer case but not sure which it is. LJ 50 or 80. Whats the final ratio and I can check.