never did i say it was not running on all eight....it ran on eight every time i heard it.

sequential fuel cut is the bees knees
dial in the revs you want no obnoxious backfire
just music

petefj40 wrote:

sj408 wrote:Thought you would of had more of the commodor pete

To busy behind the wheel.
Anyway. I have enough vid of the Holden doing skids.

Was thinking more of the mag & turbo ute

For a holden it sounded quite good

Thought you would of had more of the commodor pete

Thanks for this suzuki 1k
This should be a sticky stuck to the top of the page for awhile.

that thrust bearings not making a noise now tho is it ?

Hi Jason

Just a query about the date of this event As the date on the club site is diferent.

http://www.4x4events.co.nz/node/372

Hanmer 4x4 Mudplug. Saturday 31 July. At Pucker Park, Woodbank Rd, Hanmer.

Cheers Darryl

Hi guys

Need a turbo for the above for a mates truck.
Pref CHCH but anywhere will be good.

Cheers
Darryl

Hi Spanky

Do you still have the turbo.
Mate has just blown his up

Cheers
Darryl

Hi UBZ Please be patient we have around 17-1800 photos to go thru. There may be some photos & videos on here from those that attended but we have to sort out whats what first so the appropriate people can be acknowldged for the photos & videos. 4X4 Action Magazine will be Running an articale with ...

Yes another Zukfest been & gone. The wheater gods played their part all weekend adding a little bit of moisture on sunday mornings run just to liven things up. Thankyou to all participants without All of you it would not have been the amazing event that it was. To have trucks from Whangarei to ...

Hi All - - ZUKFEST is only a few days away now - looking forward to seeing you . I know that some of you will be leaving home during the next few days so have a safe journey to REEFTON. We will be at the R.S.A. from mid-late afternoon on Thursday to check vehicles and put up trip lists. Those of you ...

PM,d you bud

Hi andew

30"s and 2"over shackles will get you into & out of alot of places for a start.

my 2c

Darryl

Bump The irrigation has been getting turned on , The grounds Soaking up the water , The mud holes are reforming , The sponsors are getting Generous . Bring on Easter , Enties still bing taken , Accommodation is running out !. Come along make some new friends & catch up with some old ones. m m m

I would also do oil presure, Lets you know before you do major damage to an engine whilst climbing or on an angle.
set it to 15-20 psi

That would be tipical,just like nz change the rules then tell everyone

Who's been a naughty boy

Yeah What he said just make sure the surfaces are clean & don't have any burrs on them.

Correct there Hedgeboar. I used 1100 carb soldered the jet up and redrilled it 1 size down, Then thined the needle to match , Took a couple of times to get it near right but works good now. not many places I can't get that the 413 go . You would want one off of a 1300. Talk to the boys at swift or ...

Had the same problem with mine went with the SU as injection not available for F8-10 engines. As for availablity of the manifold conversion make your own. This conversion can be rapped up in an arfternoon for about & $100-150 depending on how much the carb costs you & how much you have to bribe a ...

Hi wildplumdx

What you were reading is supply voltage .
Ground your meter and find the supply conect this to the appropriate wire on the sensor . Retest with muilt meter on the other side of the sensor to ground..
Sounds like a cheap light or bad pickup at lest.

Hope this helps
Darryl

A vehicle that is stuck can require a huge amount of energy to extract it. For example: A vehicle in mud, to the chassis rails, requires a force of 3 x vehicle mass to move it. On a Suzuki Vitara (approx 1250kg loaded) this means a tow hook can have a force of 3.75 tonnes on it during snatch ...

wow more words than intended

found that when i was looking to fit mine to the sj 410.
not sure what the front beam is like on the tara's but i filled the beam of the sj with a length of 3mm rollcage tube and mounted from there to my bullbar.

CCVC-SAFETY-0002 Approved by the Club Committee 29 June 2005 CCVC-SAFETY-0002 Minimum Standards for Tow Hook Mounting Introduction: • The Cross Country Vehicle Club requires members' vehicles to have a certain type of tow hook securely mounted to the front and rear in order to participate in club t ...

Sweet lookin truck there UBZ .
Would look real mean in the bush around reefton

Just read it again myself , my mistake

As Swainey said sounds like an earth problem.Remove & clean all of them,

If you have taken it swimming lots want be long before others start to build up a resistance

http://www.offroadexpress.co.nz/sites/default/files/My4wds/fathersday%2009%20017.jpg Boys Day Out Chch 09 http://www.offroadexpress.co.nz/sites/default/files/imagecache/preview/My4wds/DSCF2070.JPG Wiamak playday http://www.offroadexpress.co.nz/sites/default/files/imagecache/preview/My4wds/DSCF2023 ...

I run irontite in mine full time just add a whole bottle. Have run it in my racecars all the time , you never know when you are going to get a stone or stick thu your radiator. Better to have it start working before you wreck something ,than try & get it to work once you have toasted your motor. the ...

BUMP

The pins on the back of the new lights are back to front.
You now have the problem you are talking about.
Solution :

Take the wires out of the plug & swap them round,
low beam l _ l high beam
earth

highbeam l _ l low beam
earth

problem sorted