So my option fell through.
Still looking if anyone has one.
Have pm'd above member also.
Cheers
Bradley

So had undone the bracket to bellhousing and the downpipe join to mid section of exhaust and still not enough movement.

Ended up just winding out the studs from the block and putting it in place on the turbo then putting the studs back in easy as!!

Yeah a genuine one wass $1200...
Am awaiting one to come in from a mate think around $135 new so should do the trick.

nt_a_foz wrote:Theres not a bracket somewhere that im missing?

Done the one from downpipe - Bellhousing.

probably what im missing..is there a bracket??

Theres not a bracket somewhere that im missing?

Done the one from downpipe - Bellhousing.

Apologies sorry started a few threads at once appear to have left details out of this one!!

1993 Surf. 1KZ-TE
Yes exhaust still attached. Possibly my problem then??

Took a fair bit of prying to get out thats for sure.

Someone must know the answer??

Will get back to you might have something sorted as a temp measure till a possible conversion occurs!

I would of refilled it had i known it was empty prior to drilling a hole in it to lock it to test if it was poked or not lol....oh well new viscous it is.

So after replacing waterpump, thermostat and radiator turns out my viscous fan had no clutch fluid in and was poked....worked fine at crusing but under load wasnt running fast enough.
Fixed that up and good as new now!!

So after replacing waterpump, thermostat and radiator turns out my viscous fan had no clutch fluid in and was poked....worked fine at crusing but under load wasnt running fast enough.
Fixed that up and good as new now!!

Think i may have missed a bracket somewhere but someone will know if i have. Was removing exhaust mani on my surf and undid all the block studs/bolts etc and the bracket on the downpipe but when it came to remove didnt seem to have any movement to get it off. Managed to get it off with a crowbar and ...

After a exhaust manifold to fit a 1kz-te,.
Preferably in the waikato area but could get shipped no doubt.
Cheers
Bradley

Need a LN130 Surf rear tailgate glass with the 2 runners on the bottom today more or less.
Can be picked up Hamilton/Waikato general area or have a friend coming to Tauranga this arvo.

Let me know if you know of one or got one in the shed.
Cheers
Brad

Yeah have already pulled apart etc to diagnose issue so no problem there.

Have talked to Lineside Wreckers/O800MYHIACE and got another rail coming for $25 so all is good.

Have got a issue with my KZN130 Surf rear tailgate window. Theres 2 small channels on the bottom of the window that the window up/down arms slide through to move the window up and down. One of these has rusted out so the arm wheel falls out when the window goes up an down. Has anyone had this ...

Got ecu back and plugged it in..All is go.
Thanks to Anything Electronic in Nelson bloody legends.

Had a call from the guys in Nelson and said that the ecu had some faults which they have repaired and are sending back so fingers crossed all is good and itl fix my issue.. Will update later this week when the ecu arrives back.

Hmmm wish i tested this prior to sending ecu off this morning.
However have had one fitted for off road use for ages and has just started not selecting O/D.

Fingers crossed its the ecu and all will be sweet again.

Sweet thanks after a bit more google searching last night come to the same conclusion that its most likely this.

Will package up and send to Anything Electronic this morning apparently they are the ones to send it too so hopefully it sorts it out. Bloody annoying only having 3 gears lol

My KZN130 wont change into overdrive. Just started the other day when i started after sitting for a couple of weeks. Have had a quick search on the net sounds like its a common problem with ecu or overdrive solenoid. Have pulled apart ecu and nothing LOOKS fried might take it to a sparky to get ...

Beauty thanks for that UBZ, i think im going to get it anyways and ill just tinker till i find the problem. That information looks like itl be handy.
Cheers
Brad

Mudstars are pretty much clones of buckshots and are faaaarr cheaper if your looking around. Yeah I saw that when I was researching but then got these for $219 a tyre including fitting and balancing cause the tyre shop mucked up pricing on trademe but i clicked buy now so they honoured the deal ...

heroes legend wrote:You're the same Brad from clubsub?

Give me a heads up on where you got your buckshots from, i need to replace the rears on my nissan.

Yeah mate sure is, Flick me a PM on CS.

Ended up getting some 31/10.5 R15 Buckshots for a decent price, preform mint in the mud iv taken it in so far.

I did get those rims and they fitted perfect which im stoked about looks heaps better than factory rims!!
Cheers for the help

Looking at a 2nd surf a LN130 as my 3.0L one to tidy to bush bash. The one im looking at has a issue with the 4x4 system. The guys a mechanic and reckons the hubs and gearbox are enganging but something in between is not.Seem to think its a electrical problem.. Any one have any ideas? Is it a common ...

I could do a lift and do plan to but not right now, need tyres in the next month for wof after xmas so will have to get whats going to fit under there in the mean time. Its got stiffer rear dobi (i think) springs to get rid of the sag they tend to have, and had shocks all round replaced at some ...

Well look who it is lol..small world i been on here for 2 or 3 days.

Sweet so rims will fit then thats what i wanted to hear. Tyres im running 31's 10.5 somethings at the moment but will be coming off as are near knackered. Will be getting new tyres although will be same size or 32 at a strech given its standard height at moment. Any recommendations on the size or ...