LWB ones will give you about 30mm of lift in a SWB or buy new raised ones. Its always best to have the right part for the job.

Thanks for all your help. Now on the hunt for one

WANTED Nissan Safari Spirit RD28 Auto trans with transfer box for a project truck.
Will consider damaged or blown one also.
Any location, i will organise freight.

Thanks for that. Will any Safari transfer do? I.e. TD42 TB42 manual or auto or does it need to be off an RD28 Safari box?. I have a whole Stagea so have all the loom etc.

Hi, I have a TD42 rolling body (no motor or gearbox) and would like to repower it with an RB25DET and auto for off road use only. I have a Stagea 4wd auto RB25DET and a R34 Skyline with RB20 Neo auto for parts. Can anyone advise if i can run one of the autos i have with some other nissan transfer ...

Carb = Yuk!

Its only plastics that need trimming.

Assuming it is a 1998 on Jimny? 215's will be to narrow for 7'' rims. If you go to 235s you will need at least a 50mm body lift with the suspension lift and some trimming. Jimny's have small wheel arches.

I have a brand new set of 35x13.5R15 Maxxis Mudzillas with or without 15x10 alloy rims. Done one club trial but too stiff for my truck.

Ditto.

I think i have both there. Sent you a pm.

Sounds like with all that experience you need to tell us all when you're going to attempt it so we can come and watch. Ill bring a chair and a few beers and my camera. Haha.

Square front and rear where there are separate bolts. Round for the 6 under the floor.

Just get a standard one and drive it like you stole it until you have some experience then decide which route you want to go down.
A standard zook will still go far.

Hi Tim,

There is a run/track making day on this Saturday up at the tect park. They cater for all grades.
Ask to join the Facebook group and you can see whats on.

Craig.

I can be everywhere all at once.

You should of just asked. Message or txt me the details and i will go grab it. Lukes got my number. I need a spare for mine haha.
Craig.

Grind them off flush then drill a new hole right through and put a longer bolt with nut underneath.

Saw one of those in Te Kuiti a few months back. Hadnt seen one for years. Wasnt it something to do with prisoners building them?

Wanted to Buy
4x4 Transport Trailer
Drive over the wheel type at least 2m wide.
Preferably with dual wheels, braked and galv.
Will consider unbraked or unfinished too.

Thanks guys. Have sent PM for both trucks. I have had a Lada once and even though they are actually pretty good trucks i will leave them to the Russians haha.

Looking to purchase a trials truck not to concerned about the class as long as most of the components are Japanese and upto around the 10k mark.
Maybe you are thinking of selling one or may know someone who has something available. Would consider an unfinished project.

I have one with the winch and shaft for $500.

I do have another 413 body which i might part with. It is pretty solid but has rust around the 2 front floor cab mounts and a bit by the back door hinges.

I have a rolled over body. Its a good tub if you cut the roof off.

Thanks, will do.

Wanted a set of Suzuki SJ410 SJ413 Samurai or Jimny rims. Prefer BOP or Waikato areas unless you can send them cheaply.

Dont know how to add my location to my profile but anywhere in the North Island is fine if its good and cheap. PM me with a price if you can.

WTB Toyota Land Cruiser BJ70, BJ71, BJ73 or BJ74 Chassis 70 series.
My one is rusted out and need a replacement. Will consider a whole parts truck.

Not yet. Will put them on TM when i get time.