looking for a pair of 2 inch lift rear terrano springs.
also looking for a pir of 33 or 32 M/T tyres .
im in auckland .

i currently have a lockright diff in the rear of my escudo and just bought a parts escudo with a lsd in the rear , could i put this lsd in the front of my good truck?
any suggestions are appreciated .

looking for a set of rear leaf springs for a ln65 hilux standard height.
Preferably in Auckland .
Thanks

hey mate how much for handbrake cables ?

one of my handbrake cables has seized on my 3 door escudo, i have a 2 inch suspension lift and 2 inch body lift in it so was wondering if 5 door cables would be better or just replace the seized cable with another 3 door cable.

does anyone have any handbrake cables for a escudo/vitara 1990

Mr Zuk wrote:i have fixed mine now down buy your fuse panel there is a big fuse type thing that dose not reset it self, pull it out then put it back in and your widows should work again

cheers mate your a legend , all fixed now .

my electric windows in my 3 door escudo arent working either have checked them out with a testlight and theres no power going to the switch at all.
anyone know what this could be?

has anyone on the forum put 5 door v6 springs in the front of their 3 door 1.6l and how much lift did they get?

doing my 2 inch suspension lift at the moment , ive done the strut hat flips for the front, and got some vn commodore springs for the front but they are a bigger diameter and dont fit on the top mount properly. are the vl commodore springs different or do they not seat properly at the top as well ...

what other vehicles have the same stud pattern as a suzuki ? trying to find some 5 stud rims to fit my sat's. thanks

im keen on bar. how much? any pics?
thanks

instead of using the camber correction bolts i was thinking of slotting the strut holes to bring the camber back in, has anyone tried this, what did you think? Thanks.

I tried the guy on trademe but he doesnt stock them anymore. they used to be about $50. I asked repco and they said $170, Not keen on that price.

I sourced mine from a plastics place in Tauranga, but they're nation wide company. Cost me about $70 all up, just sent in a design I found online and they cut to fit, bolt holes and all. I got some longer bolts from Super Cheap which I think were about $10 - $20.[/quote] Did you get the spacer made ...

Does anyone know somewhere to get camber adjustable bolts? having trouble sourcing some for my 2 inch lift. Also where do you buy aluminium for the rear a-arm spacer, or does someone on here make them?
Cheers
Charlie.

Preferably in Auckland. Thanks.

Wanted suzuki 16 inch rims for my escudo to suit my SAT's set of four.

im looking at buying some extactors to replace my standard exhaust manifold, can anybody recommend a good set or a cheap place to get them from, thanks for any feedback.

im looking for a set of extractors to replace my standard exhaust manifold, needs to be for a g16a 8 valve fuel injected

Thanks.

my exhaust temp light is permanently on when i turn my suzuki on (even when its cold) , does this mean that my o2 sensor is stuffed?
Do i just need to buy a new one to fix it?

recently bought a suzuki escudo 1990 fuel injected. and cant seem to do smooth gear changes, it makes a sort of 'Clunk' noise when I put the clutch in and/or release it. Could this be the gearbox oil being too low or too thick? also when i turn it on when its cold it idles really low but when its ...

hey everyone just bought myself a 1990 suzuki escudo 1.6L . im going to be using it as a daily driver and a weekend 4wd wagon.
Im pretty new to the forum and ive already picked up alot of information!
Thanks.

Charlie

damn if only it was manual!