Here is my bush pig, and not unlike the other bush pig in this thread its insides are blood red.... crazy japs, what were they thinking??? my only hope is to cover the interior with mud. Supra 2JZGE and V6 auto. 4inch suspension lift with them drop box IFS thingys. landcruiser rear shocks,pajero ...

Ah, you trans has the normal transfer case, not like mine, which is an auto transfer case. i get ya. do u have a link to the wiring diagram for the manualised auto trans? from experience you need to add a few connectors into the shift position sensor plug as the one on mine had a few missing as it ...

that diagram has both GTE and GE ecu wiring the GE has no AFM, only a MAP sensor. the 4x4 trans has 2 speed sensors i think one that has the cable for the speedo itself and the other is for the auto trans.... knowing how both trans' work im certain the 2JZ ECU will run the trans. as for me..... i ...

You didn't even hit the rev limiter... btw what exhaust have you got? is it a JDM 2JZ-GE (ie with a MAP sensor)? I'm having real trouble finding a correct wiring diagram. I didnt hit the limiter cos ive set it to 7200 and its a timing retard/ soft limit rather than a harsh cut like the OEM ECU. the ...

Fun fun fun..... m a small hill in the pureora forest over queens birthday weekend. http://i193.photobucket.com/albums/z106/em_knaps/hilux2jz/IMG_0649.jpg the group. managed to break the crownwheel/pinion in my front diff but i guess thats understandable if you knew what i was doing.

Hey thanks for the tips fella's Im realy not sure of this engines suitability to 4x4ing, perhaps i have just been spoilt by my injected chev that i had in my last surf, and perhaps i need some 4.8 diff gears as it has 4.3 and does 150kph in second gear. these engine really are peaky with very little ...

I spent a LONG LONG time searching for the lift kit, was put in cocntact with a guy in chch who had one in the back of his shed. i dont think they are redily available altho i have seen similar kits on e-bay just 4 inches in the suspension, no body lift. i paid $250 from memory, but ive not idea ...

Cheers, its not water prof. ive not had it in any water just yet, knee deep puddles sure but no wading has been done. i know from just water blasting mud off the engine that it gets into the plugs and creates a miss fire. i think a new dizzy cap (its cracked) will help and a new set of leads also ...

Hey folks, been a while since i was last browsing these forums. thort id do an update on my shitty old surf, after a major breakthrough only made possible by one of the members of this site "SUPRASURF" anyways, vehicle in question: 1990 VZN130 2 door (red interior YUK!) bought for $600 on trademe ...

Hey lads I bought these shocks new for my lifted hilux but found them to hard for me. m i want about $250 for them if anyones interested let me know and ill raise the reserve on the auction to a rediculous price and sell them to you instead very nice shocks roughly 260mm of travel.. Cheers, Daniel.

Definatly a 1UZ-fe 4L V8, should fit in a LJ71 just fine. bellhousings for the R series boxes are available in NZ. single turbo 12psi boost=500FWHP ive seen a few hiluxes with supercharged 1UZ's shit do they move. ive just fitted my VZN130 with a 2JZ GE from a 93 supra. nice engine bit gutless below ...

GS is running the 1300 from a GSA <oooooo extra 80cc!!!> ah yes, ask again in a few months, should have my mates 1UZ powed VK holden racecar going by then, hopefully the supra a few months later. check out w theres a hand full of ppl running 1UZ's they are realy no harder to make go that a normal 3 ...

hey matt, it was all my doing, you culd call it tuned. badly, but nice enough to drive used 50L of gas to go from west ak to taumaranui. ive done a few so far my old chev TPI hilux 3T-GTE in a hilux datto 1200 in an offroader turboed cortina next for MSing are my 1UZ TT supra 78' GS citroen turbo Ur ...

Spent the WHOLE week previous to queens birthday weekend making my Supra 2JZ-GE powered VZN130 go. Engine fits very nicely complete with Megasquirt ECU and a somwhat flimsy IFS lift kit, Manualised V6 auto Maiden voyage down to national park on queens birthday weekend to do the 42 with sum mates ...

Steering shaft starts to get to short. and starts fouling the hole in the firewall....

Food for thought, It can be caused but a body lifted truck having the gearstick boot put pressure on the gearstick so when your going from power to overun the boot pops it out of gear.. I have seen it happen. i guess it could be a cause. but most likely not the only cause, if its an internal problem ...

Yea, i guess 650 is ok. i sold one a while back for 300 on trademe
upon reflection i should have sold it on here.

am resonably certain the KZN130 uses the R series box.

ah that would be the facelift 95 onwards i think, same gearbox also, i think.

the *N130's were the 1st of the 5 doors surfs with ifs and coil rear

went right thru to 98 i think, im not sure tho.

u rekon it was 10cents?

my 5cents worth, the R15* series gearboxes are based on the R154 twin turbo supra gearbox, which is capable of handling over 500hp in a drag car. so givin that the Toyota V8 only emits about 260hp and has not a great deal of torque. im sure a R15* will be fine her are the ratios from the R15* family ...

Mmmmmmmm haaaaalf price.

they are the best ones.



i thoought my post may have been a little late.

I guess the pinion contact thoery could have some truth behind it. My diff doctor has agreed with me that 4.5's seam to be more prone to ring,pinion failure than most, and my self i have seen a few 4.5's mashed up in various vehicles i found some interesting info on here: m this is a USA site so ...

those funny bolts are a real shitter, i had to gas cut mine off. from memory that side casing does need ot come off before you can get the intermediate shaft out. also if u can find a LN61 diff head to robb the passenger side axled tube off i sugest you do, and do away with the stupid vacume ...

My 5 cents worth. Toyota "G" series diffs. these are in hilux's hiace's some prados some 4x4 liteaces and 70 series supras and the same era toyota sedans(IRS tho) 4.5 ratios are prone for breaking so stay clear of them, Not all LSD's are 4 spider the ones to find are the ones with extra ribs on the ...

Hey muddy, i work for a rental car company and we have started using Supercharge Batteries. they are nicely priced and of very good quality. out of the 50 or so we have installed in our fleet we have had one failure, and this was after being completely flattened several times in a truck. hope this ...

ah yes, very keen

only realy need the front parts but ill buy it how ever he wants to sell it.

Price?
Location?

awsome.

cheers suprasurf

cheers for the offer anyways dude, i got the rear half of the kit from a guy who has an LN61 and got the whole kit from a imported and just used the front half. as he has leaf springs on the rear.

so i think harrassing some car yards would probly be a good idea.

Cheers

Ah yes, I think the poor fellow was just a bit overworked. he has done a brilliant job tho, the forums wouldnt be as they are tody with out his (Lance) dedication. The whole site is a brilliant EFI resource. Try the MSnS forums also, they are in the mix of software development for the MS1 All my ...

As mattman found out, they do have a little bit of trouble self priming when above fuel level... it is under full load that the ill effects of a poorly fed EFI pump will be noticed, perhaps a bit of a lean out which is usually a bad thing. Theres a good reson why the feed to tthe EFI pump is 1/2" in ...

Thanks guys, Solid coil'd diff at the front would be very nice. but im on a budget, so i wont be getting one from the USA thats for sure. unless they can sell me the bare minimum an ill make the rest myself. Altho the IFS has a weak diff and articulation is more or less none, i still like its road ...

Hey fella's Ive been running and building megasquirts for the last 2 years. I had one in my 327 TPI powered surf which i just sold. They are good but you realy do need to know wot your doing. im still learning after 3 installs on various vehicles. I have a 1UZ in the pipeline also that should be ...