and done......... pulled speed sensor lock nut off, undid timing pump cover, sure enough O-Ring had split......... off to the engineering shop, and 1 O-Ring later, no more leak... cheers for your help bud

tomsoffroad wrote:Ours kzn130 did the same. I chucked a plain old rubber ring under the loch tab washer about 30000km ago 50c O ring and 5mins of my time. I'd even consider replacing the O ring again if it started leaking again

that simple.... might look into that,

Noticed a patch of diesel on the drive yesterday, looked in engine bay and diesel is leaking, more squirting out from the top of the injector pump looks like its from around the engine speed sensors thread.. 2aUCkhpoFfo Im guessing there is a O-Ring inside this plug? Can you guys recommend a place ...

can everyone else smell that?.................. its really strong............. smells like bullshit

we need to start a sticky called "Muppetisem" and stick this in there

The local turbo guru reackon running half your normal impellers on the turbo to help spool up time and increase responsiveness. You unbolt the housing and pull off the fins with a pair of snips. They usually have way too many fins for the area of the turbo so if anything it'll spin faster and make ...

to try and get more power on hills how do I adjust the turbo on a 1991 td 2.7 a boost controller is your easiest way, but if you were expecting that a manufacture would put the ability to blow up your engine through "in cab adjustment" maybe you should not touch anything as you will most likely ...

Just to wrap this thread up, im sure most of you would have known this already but im just learning about 4x4 setups... Got some stock height Dobisons springs from Trundles Automotive ltd, cheers Chris Corrected the rear sag as i was expecting and the 20mm lower on the right as the springs were side ...

Also looking at the picks the springs are fucked , 20mm side to side isnt to bad considering the tank is on the drivers side but i would reccomend renewing them it almost looks lowered in the arse end !! its underway.... so 20mm is nothing to worry about? not going to cause funny tire or suspension ...

Trundle wrote:

Spoonman wrote:price & avail on 95 KZN130 surf springs stock ride height

In stock uprated std heigh rears 275 inc freight

what brand?

just put the hose over the springs that came with the surf,

is the pink dot meant to mean anything thats all i can see

didn't know they were side specific...... cheers for that, guessing its to compensate for fuel tank and lard arse drivers.... but im only 85kg so dont think thats the issue

price & avail on 95 KZN130 surf springs stock ride height

:lol: come there fella 18y/o springs that arnt saggy i know lots of 18y/os that arnt saggy but springs are another story Yes i have a big L on my forehead for asking that question well i was hoping that springs from a newer model fit like a 2005 or something like that, but i have no idea about surf ...

^^^ You might have to fork out for some new ones if you want guaranteed no sag, or put a coil spacer in on the saggy side, not sure whether that would be a good idea. I see in your other post the comment about the T/bars, it does look higher maybe one side is wound higher than the other making it ...

WTD Stock Rear Spings that have NOT sagged 95 Surf KZN130 have already swapped springs with some others off TM only too find they were just as saggy as original ones, please do not contact me if you have saggy arse stock ones anyone whos surf has not done a million ks whilst towing the titanic and ...

Spring perch's look okay? Could be a bent chasis? bent chassis......... how do you tell, look down the chassis rails?, the surf does not crab down the road or give any impression that its bent. could something up front be bent that might cause the thing to lean, as i think it may of had a bash in ...

http://i266.photobucket.com/albums/ii280/arcnz/2013-12-12-132_zps357e0ad8.jpg http://i266.photobucket.com/albums/ii280/arcnz/2013-12-12-131_zps576f1592.jpg http://i266.photobucket.com/albums/ii280/arcnz/2013-12-12-130_zpscc509554.jpg http://i266.photobucket.com/albums/ii280/arcnz/2013-12-12-129 ...

Hi New to surfs had a Yn65 hilux before this, I just purchased a surf. I brought it knowing the rear was sagging thinking its just the springs, due to being coils. being a bit of a tight arse i swapped the springs with some second hand ones, being told that the surf they came from did not have this ...

te aroha

WTD rear spring bump stops KZN130 1995 Surf

WTD: 31x10.5 MT on 15" rim for spare on hilux stud

close to Te Aroha pref for pick up but will be open to ideas

skid wrote:

Spoonman wrote:Pickup would be preferred

would be handy if actually said where the pickup was from

a handy little hint is to update your profile to include your location in the box on the left

<<<<<<<<<<<<<<<<<

updated, sorry about that

i see that people have been trying to drive up the river at the crossing so either the council or some farmer has put metal bars into the river to kill your radiator or tires if you try and drive up, sounds more like the age old scenario of a couple of muppets hacking someone off and they in turn ...

Benelec Whip Aerial NZ 26mhz 1.53m length open to offers as i have no idea what its worth so offers, ill leave it up for awhile to see if anyone's interested, but its no use to me. I cant tell you all the details about it other then whats above, im guessing that NZ stands for 26mhz?? Pickup would be ...

went up thompsons (te aroha side) last night, slips have been all cleared as mentioned on another thread, but since a digger or bulldozer went to the top its rather smooth, currently a 2wd trip apart from the playgrounds and the lookout at the very top

well that may possibly be a mistake i just made without knowing the full story...$$ Peter V is a straight up guy... any funds he manages go to where they belong... Rest assured Yeah totally agree. If you keep personality clashes aside, the quickest and most surefire way of getting the necessary ...

No problem to provide a bank deposit number for the management account. The bank is ASB Parnell 123075 0145320 00 Got my donation... Just put a donation through works doesn't it, but can the account holder please post a list of people that have contributed and when (not the amount) as some sort of ...

As a idea (please dont take this as being rude) but why dont you or whoever controls the money or donations for the track, list a bank account number or a paypal donation fund, which people could do online as this is the year 2012 and only a small minority of people carry cash on them or can be ...

still closed, went for a drive over that way today. Answering machine only talks about the weather from the first week of Jan. Does anyone have any info on how long it might be closed?