Yacob wrote:

glued wrote:I had to hotwire my y60 due to losing keys...it had no first gear or over drive,so id assume if you run it with no ecu you would have the same problem?

So pretty much it just had 2nd and 3rd ?

yep thats right

I had to hotwire my y60 due to losing keys...it had no first gear or over drive,so id assume if you run it with no ecu you would have the same problem?

I understand your concern with auto's,ive never had any problems with mine. Yeah its a td42 24v. Are you after running gear or body parts,cause as mentioned three doors are ok,but the rest of the body is pretty rotten.The running gear is good,never had any issues with it. Send me your email and Ill ...

what do you mean by fuel milage? Kms per liter? I reckon the auto,s are under rated for off road use and towing,I towed 3 and a half ton to welly and back with it,bugger doing that in a manual.

yeah im in Awhitu,about 30km out of waiuku,up towards the lighthouse.That guy off trade me came out and looked at it and said since its an auto its worth nothing,fkn dickweed......also since one of the mirrors is smashed and the grill broken its worth even less,oh and its been repainted black,so ...

I would part it out but im out in the sticks and don't have an engine lifter.....I may start stripping it though.The drivers door is rusty at the bottom,gutters and sills are cheese,front drivers guard is dented,grill is slightly broken on the same side.All the other doors are good,all electrics ...

price reduced to $1800.....I figure that's a good deal for a safari? Maybe im wrong?

yep full body,everything is there,low roof job,5 seater.Back bumper and side steps are missing,front discs arent the best,swivel hubs are leaking,but aside from that its a good runner.

Selling my truck....is on reg hold,has 270km on the clock. Runs real good,doesnt use water but has a hole in the sump so leaks a little oil. Body has the usual rust sites,so may not get another wof,but the drive train is good,electrics all work.Would best suit an offroad truck or paddock hack. Im ...

bump

cheers trundle,what would postage to waiuku south auckland be? Also,does it have the large square section on the bottom.Mine is leaking from the welds.....I asked a local guy to braize the welds on my sump and he asked if it was a "gated" sump,what does that mean?
Cheers for the reply.

anyone got a sump for sale?
Thanks

heya...all the welds are pretty naffed by the looks of it,i could get someone to weld it but id say they will be chasing leaks most of the time as its pretty thin metal to begin with,and all the edges of the welds will be thinner than the metal or the welds themselves.If nobody has a spare that may ...

Hi lads,im after a sump if anyone has one,mine is sweating oil through the bowl welds,no point fixing it as I have a no gas welder and it will just leak again. If anyone has one,give me a yell.
Cheers

I get you now muddy, logical fit sure. I think I nailed it good enough, steering wheel is straight now ,but as mentioned an alignment is a waste of time,for me anyway,wheel bearings need looking at. I don't get the 95kph shakes but there's play so I'll have a goose at them moro. Thanks a lot u guys ...

hey muddy,measure the distance between the front of the tires and what?
Could you clue me up a bit more? The inside edge of my tires has been chewed quite a bit,would that be too much toe out?
Sorry for all the q,s guys.
Thanks

what a pain in the cock that was.I counted the threads on each side before taking olde rods out of the relay bar,set the new ends at the same thread count,and when I went to put the bar and rods back in the left wheel was out by a fair bit,had me stumped.The string idea sounds a go,its the only ...

cheers curly,so 2 hammers....incase i break one
Thanks for the quick reply man....

heya guys.Im about to replace my tie rod ends on my y60 saf.Do i jack the whole front up or just one side at a time,or can I do it with it on the ground?Sorry for the silly question.Ive search but cant seem to find any info,and the manual doesnt really say much about it. Thanks Also,i was sold a ...

Heya lads. The sump on my td42 has started seepin oil through welds that don't look factory, the sump has a box section welded underneath where most just have the bowl ,like a large baffled pan by the looks. I'll big a pic up when I'm off the phone. Does any one else have anything similar? I've been ...

orange peel is from too much or not enough pressure,too larger nozzle or paint too thick,or holding the gun to far away from panel,or strokes are too fast,alot of variables for peel. (27yrs in the game). you can lay it on thickish with fast thinners in good weather and it should be fine...4to1 as ...

my bar looks standard,as it has the clamp ends,not lock nuts as such.
Im just going to have to take them in i think,bugger it.
Cheers for the offer trundle,shipping would be a pain as im on the awhitu peninsular in west auckland,cheers though

thanks so much for that info dude,and yep they did confuse me thats for sure.Do you sell them at all? So id still need to remove them to check for thread direction? What a pain in the cock. if I was to buy a complete end to end set up,would that be an easier option,cause I know if i do the ends ...

hi Trundle,thats with the connecting bar aswell? I dont really need that do i?

ive been ringing round for tie rod ends,autostop reckons there are 6 different types,and I need to find out if they are male/female,left or right hand thread and if they are 23mm or 25mm......they said just bring them in,problem is im out the manukau heads and its the only vehicle I have to use ...

sorry guys,yep parts needed are for a vrgy60 safari

Hi peoples.Where would I get rod ends for less than tarde me priced me at $320 .Also,does anyone have a LWB y60 shell,im after a complete roof cut.they rust pretty well dont they,from the inside out by the looks of it.
Cheers lads

cheers for the reply

did you bench bleed the master before you put it on your wagon?

Hi,would you consider sending at all,im out the manukau heads,long drive and my truck is not legal at the moment/
Pleeease