Nice try. But radiator cap is new. New t/stat, new waterpump and fan, new hoses, clean radiator twice, acid washed block, checked timing. Bottom hose collapses under revs when overheating. Only other thing i havent tried is taking exhaust off to check if its partly blocked. Where are you located ...

Holden also do an oil for the eaton superchargers on the commondogs, And its heaps cheaper and comes in a larger quantity

Turbo wise ive Had excellent results with masterpower t28's, and rx7 ht18- t3 hybrids

Here is a link on how to modify york compressors
http://www.jedi.com/obiwan/jeep/york_oilmod.html

Will keep hunting for the sanden one

My neighbour purchased one to bend some 2.5mm tube. What a mess, the bends are crushed and out of shape,

Looking for some 16" rims, alloy preferred to fit mitsi challenger
Will consider from anywere across the country dependant on freight cost

Pm or post up pics,

Cheers
Si

Why has it snapped?
Could just weld it up,
Ive modified plenty by cutting and welding to shorten and lengthen,
Have also made adjustable ones by running a die nut along and threading a tube to join both halves, good for preloading the actuator to up the boost slightly

Recently did a 1hdt from a coaster bus that failed #5 bigend, Actually had no bearing left at all, not even welded to the crank but completely gone, worst ive ever seen, (13 years as heavy diesel tech) Sourced 3 cranks before we found one that didnt need machining, They were either undersize or bent ...

assuming its only rods why not drop the bottom end and replace the rods. tones of busted engines to rip them out of. not exactly a pro job but a whole lot cheaper than trying to find a good 2nd hand engine. Easier to pull engine and do it, the head also has to come off to get piston and rod out ...

My machinist recommended me to stay away from the toyota genuine bearings for the 1hd-t
I used acl from sta parts in auckland

If your going somewere else a few days or weeks after it was failed, ive personally found being straight up with another wof guy is the best course of action, or at least ask his opinion before forking out for a wof with the new place, could be more $$$ wasted They enter the failed category in the ...

Id get it on a set of brake rollers and see whats going on before replacing bits

Alternator,

If it was the battery the charging volts would still be ok (13.2-14.5ish)

These guys will have them, i get the large valve ones from them for 100t dump trucks

Tech Tire Products NZ

135 Station Road, Otahuhu 1062
(09) 276 2089

Im Curious to know what the stock tyre size is on a 96 challenger,

Cheers