Do you have drivers window reg for 91 5 door?

Drivers window reg? And rear window switches?

Im looking at selling mine, 91 LWB 1600 efi 5 speed. 170,000km dark green. lots of new parts (AT Tires, Extractors + full exhaust, water pump, cam belts, frost plug, radiator etc) and a few small upgrades but mostly stock in great condition.

0221509738 - Truck is in HB

might do, ill have a look

Here are some photos to try to help match it up.

Bump

Yep she's buggered. Let me know if you can source one

Happy to pay $50 including shipping and your time to remove. I will pull my one out tomorrow to make sure it is buggered and not just an easy fix

Cheers

Hi guys. I need to get hold of a drivers window regulator mech for a 1991 LWB Escudo or Vitara. I know the wreckers will have them but I don't want to pay $150 for it! In Hawkes Bay would be even better but don't mind paying for post.

Cheers!

Sorted. Thanks for the advice guys. Got 5L of Penright 75w90, should be enough to do diff too and have it all done.

So in taking the gear box out to replace the clutch I pulled the front prop shaft out and lost all my transfer box oil . What is best to use to replace it and how much does it take? While I'm at it I'll do the gearbox oil too so looking for opinions on what's best to use and how much it takes too ...

Since your an expert now then..... Can you give me some tips on the removal? What to/not to do? Where to start? Do this before I bother to do that? etc etc.

Would be very handy

Hi Guys,

Does anyone have a Toyota SC12 supercharger for sale? Im also looking for a smallish intercooler and various piping and joiners etc.

Cheers

The SDK-6935 is just the name for the whole kit, and when i clicked on it the parts included in the kit show the HD part number. Cant get it to show up any other options.

Local supplier has the exedy one in stock for $230+gst which seems pretty good.

Could only find this, Looks HD?

Ok so its time to replace the clutch, At 186,000km I guess its probably the original. Truck is a 91 Escudo with the 1600 16 v MPI engine with 5 speed box. I do have plans to increase the power of the engine in the near future so would like to have something that isnt going to slip with a bit of ...

Hi guys. Won an auction this week on some AT tires that come with 5 steel 6 stud wheels I don't need. I would like to swap these for some 5 stud suzuki escudo fit wheels so I can have a road set and the ATs separate. I don't know anything about the wheels yet but will measure them up when they turn ...

Sweet thanks guys

zukmeista wrote:If you want a tyre that is gauraunteed not to rub with no mods, the largest size would be a 215/75/15.

I know it's outside what you said would work but only just.... are 215 80 r15s going to be Ok? And what does ATm stand for?

Thanks

Ok Thanks. Would they fit on the steel wheels I posted the link to?

Any particular tyre that you guys have found works well on these? And a cheap place to get them?

Hmmm don't want rub and not keen on modifying suspension at this stage. Anyone know of a set for sale that will fit?

http://www.trademe.co.nz/a.aspx?id=624831425 http://www.trademe.co.nz/a.aspx?id=624831425 Wanting it to fit a 91 escudo 4 door with standard suspension etc. Is it going to rub with 31s? Is pretty cheap and local which is a bonus. Or does anyone have a decent set of ATs for sale that will fit? Cheers

Can you pm me your price?

Sweet, thanks guys!

So I have all the intake stuff off my g16a 16v and this is at the firewall end of the bottom half of the intake plenium. It was"blanked" off with a piece of metal and a bunch of gasket sealer, can someone tell me what it does and if I should leave it covered up or open it up like it would have been ...

I have googled on this and came back with varying results. Basically I have the engine in bits to replace the frost plugs and was going to do the cambelt etc while I was in there but have run out of funds big time. If I cheap out and don't do the cambelt job and the cambelt snaps is it going to bend ...

So after about 4 hours of swearing I have all the injection and induction side off the engine and it is the front frost plug. Lucky me. Ill check the Suzi Spares website for all the stuff Ill need, May as well do the camblet and water pump and all the seals etc while im in there. Any other ...

Make sure it's the 16v one and that it has extractors on it, even better if it's a 2 1/2" exhaust back from the extractors.

Where are you based? There are a lot of escudo/vitara owners on here and I'm sure someone would be happy to show you their truck

In my opinion the one to get is the 4 door 1600 pre 96 ish. And I did My use is pretty much the same as yours. Ive had to tidy up a few things on it but in general it does what its made to do very well.

VTNZ do them and should have a branch in Rotorua