Hi looking for a spare to match 32x10x15 hankook dynapro 50%to100% tread depth would be great.
Auckland area preferably but will arrange freight pick where possible.

Hi i have used NZ post youshop and buy on amazon for freight free in US usually 22 bucks postage or see this guy http://www.trademe.co.nz/motors/car-parts-accessories/parts-other-makes/diffs-axles/auction-767177345.htm Or try this guy http://www.offroadspecialties.co.nz/node/319 cheers waza

Check out Off Road Secialites pricing their basic lifts are 1100 new so would give you some comparison, I sold similar for about 450 on a zero reserve auction so trade me might be your answer

Check out 4wdbits I just bought 15x8 I went with -19 offset but wish I had of done -10 so I did not have to chop guards as much as really changes lock width back into guards.
see
http://www.4wdbits.co.nz/ProductsList.aspx?CategoryID=17

Charge both separately on a good three or 7 stage charger set to calcium if they are calcium, you cant charge a calcium battery enough if its flat or they have become unequal as a pair using vehicle alternator they need to be charge equalized to get them both up a personal rule of thumb is don't mix ...

Found this link to USA Jeep Forum.com that gives info on stock upgrade parts from other models. Made for an interesting read for you XJ Jeep builders. m sorry can get these links to paste in properly try this below if not working or visa-versa http://www.jeepforum.com/forum/f11/budget-builds-what ...

Hi should try welding a jeep the panel steel is not like the cans your jappa is made of Caleb may be that's the problem check out this nz you tuber he has about a dozen great panel and welding clips See this one on welding panel [url]http://m.youtube.com/watch?v=zdsOGDzuIps&desktop_uri=%2Fwatch%3Fv ...

Im assuming CB has power and the display is tuning. if so then aerial might have a short, check the aerail has no shorts, meaning when the aerial cable is removed from the CB, the centre wire to the antenna is not shorted to the outer, need to check with mulitmeter on ohms test. should be 0 ohms/ no ...

Bringing in a kit is an option, rare to find one on trade me, Off road specialities in whangarei have good options and fair pricing http://www.offroadspecialties.co.nz I have a 3.5 inch and run 32s however you will need to replace wheels with better offset also or have issues with 8in rubber ...

giving it a bump to remind everyone its on this weekend

Hi cant disagree with any of the points listed here Info i can add is while googling other front diff stuff on USA forums for my XJ last night read several posts saying main hub Ball joint wear causes the "jeep death wobble" I just happened to pull my track bar out last week and found the bolt had ...

There is a guy based in Hahei coromandel who has been mentioned here on ORE (cant find his details ) who has these or can import them like ORS. Or ask this guy on trade me he has bits for jeeps m http://www.trademe.co.nz/Browse/Listing.aspx?id=638664271 Google Ironrock in USA they have RHD ones at a ...

Hi wanting some bits from Off Road Specialties in Northland but there site has been off line for a week or so does anyone have a phone number please? cheers waza

I appreciate you got all the falcon bits but i have seen lots of links on the Grand Cherokee conversions to XJ so would be similar to a TJ i assume and these mod in well from the looks of the forums with some tight clearances but not that tight. I think info suggests that after market rims with ...

still looking if anyone knows of some out there

yep ta Yeti understand the joining skins issue and will be careful to avoid cutting open the rear in the process!

Great thanks for link this looks to be one of the better how to links I have seen so appreciate the reply Jeep been parked up for a while as have other jobs on so have started back on this and will see how it turns out, did like the TJ flare fitments I have seen driving around here in Auckland and ...

This is titled "the most spectacular river crossing" not sure that explains it!

http://www.youtube.com/watch?v=LC5ld79joIA

Looking for a set of cheap flares off a TJ front, rears also if available. Just the standard width black ABS plastic style not colour matched ones.

Want to fit to an XJ like this example http://www.cherokeeforum.com/f67/tj-flares-xj-110465/

Hi still looking for some second hand aftermarket Jeep rims for my XJ Cherokee with some offset for wider tyres if anyone has got some sitting around

Steel type 15x8 with 3.75 to 4in or 0 to -19 offset

114.5x 5 stud pattern

cheers waza

Hi would anyone have any suggestions of a friendly north shore/Auckland steel fabricator who could repair/strengthen front control arm mounts on jeep diff. Need some slight repair and protection made.

Thanks probably to shiny for me, looking at new steels at moment trying some offsets and trying to minimise the guard chop

Hi still looking for some aftermarket Jeep rims for my XJ Cherokee with some offset for wider tyres (32x11.5x15)

15x8 114.5x 5 stud pattern

Thinking i need 4in offset. so 4in from inside rim down into rim mounting centre which is -12 to -19 offset.

still looking!

Thanks for info so far and considering all options if anyone has a XJ in auckland that has chopped guards would be great to see it for further advice.

Ok still looking for rims if anything out there

Ok need advise im going to 32x12.5x15s on an 95 XJ, no going back now just going to do it and make it work. My regret, could have been a lots easier going to 31s but after having to be dragged on my diffs so many times of late with my current 30x9.5x15, i wanted to go bigger....seems to be common ...

Thanks will have a look Was hoping to get some second hand in good condtion. Bought a set at good price on Trademe recenlty and i think the guy did the dirty on me and sold them to someone who phone him direclty prior as he suddenly didnt have them when i arranged to collect them. just missed out on ...

Hi looking for some aftermarket Jeep rims for my XJ Cherokee with some offset for wider tyres (32x11.5x15)
15x8 Thinking i need 4in offset. so 4in from inside rim down into rim centre

114.5x 5 stud pattern

Any help or suggestions would be appreciated

Same, looking forward to somewhere to play again. Hopefully we (NWOHV) can get the cancelled night run up and running again soon also.