Hi all

Still looking for pats to fit power steering to my 110/90 hybrid.
System is from a 86-91 rangie

Need the following
Pump pulley Part number ETC6408
Double crank pulley Part number ETC4330
Pump mounting brackets Part numbers ERR798 and ETC 6607

Cheers
Doug

Hi all

Still looking for pats to fit power steering to my 110/90 hybrid.
System is from a 86-91 rangie

Need the following
Pump pulley Part number ETC6408
Double crank pulley Part number ETC4330
Pump mounting brackets Part numbers ERR798 and ETC 6607

Cheers
Doug

Hi all

Still looking for pats to fit power steering to my 110/90 hybrid.
System is from a 86-91 rangie

Need the following
Pump pulley Part number ETC6408
Double crank pulley Part number ETC4330
Pump mounting brackets Part numbers ERR798 and ETC 6607

Cheers
Doug

Hi all

What's every one using for replacement seats in their 90/110?

I've got the original low backs and they are painful after a while. Would like something high back but still be able to get to the under seat compartments. later Defender? Disco?

Cheers

Hi With a 8274 if you don't recess it into the grill it will stick out a fair way and without mounting it up fairly high it will affect your approach angle. I spent a fair bit of time measuring and mocking up before settling on a low mount. However I built the bar to take both if I decide to fit the ...

The 110 has been cut down to 90" and bob tailed, runs a stroked 3.5 (now 4.4) ZF auto, 4 wheel discs and rear locker. That's how I got it (although it was in pieces) I have since added the bar work, winch, underbody protection, snorkel, wheels and tires and a few others bits and pieces.

Doug

Hi all Used to haunt this site as Rangerat a while back. Dropped out of 4X4ing for a while due to other motorsport commitments. The Rangie trayback (one of the first projects on this site) was sold a couple of years ago and now I'm working on a much modified 110. Just can not seem to shake the Land ...

1.22

Hi
After a good Land Rover LT230 Transfer box, R or T model. prefer central North Island but will look at all options.

Cheers

After a good LT230, R or T model. prefer central north Island but will look at all options.

Cheers

PM sent cheers

Wanted:
3.5 Range Rover or 90/110 power steering pump, brackets and double V belts pulleys for the water pump and crank.

Wanted:
3.5 Range Rover or 90/110 power steering pump, brackets and double V belt pulleys for water pump and crank.

Hi all
Anyone know were in NZ I can get a REDARC SBI or better yet the install kit SBI12KIT

Cheers

Question is, is the Columbus method just the term used to do the test (using information as above) or is it a particular type of test?

Can anyone explain what and how the Columbus compression ratio/capacity testing method is/works.

Google does not seem to recognize it (well for me it won't)

Cheers

Hi all

Just picked up a Runva EWX9500-Q 12V. What's the correct wiring from the solenoid to the motor. Red, yellow and blue to which terminal?

Cheers