the engine had a loom made up by the previous owner, and once installed the engine barely idled. first thing we noticed was the fuel pressure at the rail was only 20psi, so after getting a new fuel pump we had 80psi at the tank and 40psi at the rail which is what its meant to be. it still ran like a ...

time for the 4age, bigport redtop, with k50 (i think) gearbox, still using the 410 transfer case http://s10.postimg.org/itv5bhymt/DSC_0012.jpg http://s11.postimg.org/84ent60en/DSC_0013.jpg http://s11.postimg.org/iwq0dhk0f/DSC_0014.jpg the old a15 had a mechanical fuel pump, and the 4age has an ...

update time!

out with the old

is this Henry or the block he must have gotten it from? looks good in your pic!

hey thanks, its good for rocking your way out of ruts when you get hung up

strengthened front diff housing http://imageshack.us/a/img28/506/647x.jpg http://imageshack.us/a/img812/2665/56hq.jpg baby lobster out of a 198# sj410 p? the farm flat deck version.made a huge difference in low ratio http://imageshack.us/a/img202/6958/4t4n.jpg http://imageshack.us/a/img202/6958/4t4n ...

some pics from up at muriwai

http://imageshack.us/a/img209/876/4rtd.jpg http://imageshack.us/a/img812/8836/qofo.jpg http://imageshack.us/a/img513/8287/el28.jpg http://imageshack.us/a/img837/1168/emxn.jpg http://imageshack.us/a/img6/2708/m3t6.jpg http://imageshack.us/a/img842/4884/z4sj.jpg http://imageshack.us/a/img547/4823 ...

now heres some action shots! http://imageshack.us/a/img202/3553/47by.jpg http://imageshack.us/a/img543/1192/l1qe.jpg http://imageshack.us/a/img62/8252/yg5p.jpg http://imageshack.us/a/img594/8550/hhsi.jpg http://imageshack.us/a/img849/4756/atrh.jpg http://imageshack.us/a/img560/3682/iolg.jpg http ...

we found drum breaks were no good in mud. new pads http://imageshack.us/a/img819/4184/3ghb.jpg the pads separated from the shoe after 1 day out http://imageshack.us/a/img823/1678/9f2t.jpg time for rear disks http://imageshack.us/a/img707/5760/28l8.jpg http://imageshack.us/a/img19/561/tzxf.jpg and ...

a stump ripped off the guard hahaha

first test run up at woodhill http://imageshack.us/a/img706/6660/1k34.jpg http://imageshack.us/a/img94/190/ks59.jpg went ok until the engine stoped running, cleaned out the carb after that want all was well. heres some pics of the finished project it has a warn winch that can be flipped around the ...

http://imageshack.us/a/img585/5778/woxc.jpg http://imageshack.us/a/img694/1718/my2p.jpg http://imageshack.us/a/img600/2297/owpd.jpg http://imageshack.us/a/img27/169/onnz.jpg the finished product http://imageshack.us/a/img849/981/4pr2.jpg

the body was lifted with 60mm box section and already had the guards cut for bigger wheels next was the roll cage and the mounts for it. the whole thing is removable and has the seats bolt to the same mounts. the only part of the body we really need is the firewall as it mounts alot of stuff. we had ...

then made it into a convertible with the plasma cutter

it was a home built body on a sj410 chassis, with a datsun a15 engine and rare 5 speed dogleg manual box. sj trans case and diffs ect. the body was falling apart and so we decided to make it our project. firstly we hacked up the old body and striped the chassis and painted it http://imageshack.us/a ...

after looking through the builds on here ive finally been inspired to do a thread on my fathers and mines suzuki sj410.

i picked it up for $150 looking like this

http://www.trademe.co.nz/motors/car-par ... 611450.htm

enjoy

Sweet. Thanks 4 that!

What dose the rear break proportion bracket do?

Cheers 4 the reply, thats good 2 know, Im looking for a 4inch lift and will go higher on a body lift if I need 2, looking on trademe theres a few kits but none seem to be complete, from what ive gathered I will need adjustable panhard rods, the shocks and springs, adjustable rear torsion bars and ...

Auckland, depending on price I would pay extra for shiping. Thanks

Any 2nd hand 3inch exausts out there? Also anything aftermarket for a 80 series?

Hi im after any and all parts required for lifting a 80 series cruiser. Let me know what you have
Cheers

I just put my new 35s on yesterday to see how they fit. I had pretty much no stearing lock b4 they started to rub behind the front wheels on the mudflaps. Truck is standard height (probly saged due to winch and carying around my tools). They are 35x11.5x15 on 15x8 rims with -19offset m Hers a ...

Any 2nd hand sets floating around?

Im after some rims to go with some new silverstone 35x11.5x15 tyres. In Auckland preferably.
Have been told 15x8 is what im after and i want the biggest negative offset possible

thanks
Liam

thanks for all the reply's. Is there anyway to tell when the silverstone tyres were manufactured? i.e if there proper size ones.