Look forward to seeing it out on the track.

We have these http://www.4wdbits.co.nz/ProductDetails.aspx?productID=4761 1080P cameras for just $130, add micro sd card, plug it in and done.
Sample from camera

Its easy to get a cost on LS1 conversion, have a look at Marks Adapters to price up the bits, allow a couple grand to install and set it up (unless doing it yourself). Then there is running costs of a petrol, LS1 can be quite frugal if driven carefully, but who is going to do that? You can also sink ...

Taylors engineers in wanganui turned one up on there lathe in about 3 hours between jobs for my rodeo 50mm.... cost. 50 dollars, they even fitted it. 130 is a bit of a rip for a 30 mm piece of billet with the ends machined flat and four holes drilled in it to suit your flanges. The $130 spacers are ...

If you're using a steel rim modified to be a beadlock, then the torque setting will be stamped on the wheel somewhere. For certifiable steel beadlocks with 6mm plate and M6 bolts it is about 9nm. I've been running beadlocks without tubes for years, solved all the problems relating to tube punctures ...

Cheap Jeep

http://www.trademe.co.nz/849249496

Got some on the shelf, can swap over if the flat is in good condition.

I thought the TV3 news item was quite good. To be honest I'm a bit surprised the item was so long given no one was harmed.

$200 for a set of 4

Here is a better side by side suspension comparison
https://www.facebook.com/4WDbits/posts/836132666409658?notif_t=like

$10 per wheel to Marton, non rural.

Only 15 x 8 rims.

We have picked up some powder coat damaged steel rims as pictured. All are 6/139.7 PCD, -22 offset and black. http://www.4wdbits.co.nz/ProductImages/thumbs/SteelRim15x8DB.gif http://www.4wdbits.co.nz/ProductImages/thumbs/SteelRim15x85B.gif $55 each or $200 for 4.

At the risk of hijacking the thread, my hydraulic winch is for sale
http://www.4wdbits.co.nz/ProductDetailsU.aspx?productID=5097

marmel wrote:These would be a better option, only $100 more.

http://www.4wdbits.co.nz/ProductDetails ... uctID=4881

Definitely use these ones.

KOH 2014 DVD coming, hasn't been released yet. We have KOH 2011 to 2013 DVDs http://www.4wdbits.co.nz/ProductImages/thumbs/KOH4_2011.gif http://www.4wdbits.co.nz/ProductImages/thumbs/KOH5_2012.gif http://www.4wdbits.co.nz/ProductImages/thumbs/KOH6_2013.gif http://www.4wdbits.co.nz/ProductsList.aspx ...

A vehicle should be tied down so it is like any other static load on a trailer, let the trailer suspension do its work rather than fight the vehicle suspension.
We use 5 2500kg strops off the 4 recovery hooks, maybe a bit of overkill, but strops are cheap, vehicle not so cheap.

bolt straight on
http://www.4wdbits.co.nz/ProductDetails.aspx?productID=4688

The chassis has more flex than the suspension

... However, My last set of bead locks always had a small gap, I never worried about it... Not having the 2 surfaces of the bead lock firmly clamped together is a massive weakening of the structure, and DANGEROUS. When properly assembled there is shear force on the M6 bolts, when not properly ...

Bridon sell the same snatch master strap we sell.

Take the sheet back to them and ask to be shown exactly which part of the VIRM they have failed each item on. If they can't/won't then you have grounds to lay a complaint.

We ran 35s (BFG AT then KL71 as pictured) with 2 inch lift. Only needed minor trimming of the mud flaps and small bumpstop extension.

I recognise those

x2

Cap heads normally 12.9. Check what is stamped on them, there is all sorts of rubbish around.

We have a couple of different stud options. All listed http://www.4wdbits.co.nz/ProductsList.aspx?CategoryID=30

Got to say the keyway idea looks far superior to the other options.

These are our locally made spacers