QD32 Gearbox and Transfer, i think mine was from an 06 D22 navara Td27 clutch, Longer Clutch pin (i made mine out of a broken screw driver) I used a different crossmember but had to drill the gearbox mounting holes anyway. Dont remember what car it came from, told wreckers i wanted the one that came ...

Could i buy something like this (see link) and change diff centres around, the ones here are 3.9:1 where as mine are 4.6:1, Or will i have to get 4.625 housings??


http://www.ebay.com.au/itm/Nissan-Patro ... 3f4b2930dc


Happy to run Both diffs even though they are wider, i can work with offset wheels and guard flares

The codes certainly are confusing, but hopefully i will get the hang of them I thought they would be wider just double checking, as both have the code H233. So if i need to get RD28 gearbox would this be the on i am after ( m ) Also am i able to get just the H233 diff housing\axles and use my diff ...

Hey Crash, Thanks for all the info. I ended up finding the receipt for the gearbox\transfer and it is from a 2000 model Nissan Navara QD32 3.2ltr. So the H233b rear housing is that the same width as a patrol?? and if so could i just use a front housing\Diff from a GQ\GU and not have to change my ...

Here is the info on my build plate Nissan Arm Terrano Diesel 1989 Q-WBYD21 WBYD21-016924 726 R TD27 2663 FS5W71C HG46 Keep in mind that i dont have the FS5W71C gearbox in any more, i dont know what code it is but it is from a QD32 not sure on year. Its pretty cool how Nissan is so interchangeable ...

How do you guys know all these codes?? its like your talking another language im yet to learn lol, How do i know what code my box would be?? It came out of a QD32 Navara, not sure what year it was though. Would modifying the oil pan be better/Easier than flipping an axle?? TX12 Transfer are they ...

OK Cool Thanks, Will scratch the TD42 idea. I have the QD32 gearbox in mine now (As you said the standard TD box Sucks ass) So if i am reading right, i can just get a transfer case from a RB30 or RD28 Patrol to get the driver side drop?? Will they bolt staright up to the QD32 gearbox or will i have ...

They are the bigger gearbox Nissan has a few gearboxes the one you have is the small gearbox the d22 has the bigger series box that comes in the gtr. then there is the td42 gearbox. Im on the gold coast of australia Sorry to drag up an old thread, Just wanting to know more about fitting the TD42 ...

Well here's another update, made a longer slave clutch pin, ended up being about 40mm longer. I think it should have been the clutch pivot pin that needs to be longer but this is working so will stay with this for now. I used my TD27 driveshafts as the difference was only 20mm, Not too sure whether ...

http://www.amazon.com/gp/aw/d/B001G7WF4A?vs=1

Can anyone confirm whether this is the right pitman arm I would need to to the 2WD steering upgrade??

Where can I buy them from new, I rang my local nissan dealer and they said I would have to buy the whole box.

I am after a Pitman arm for a 91 model D21. It needs to have the large output shaft hole and the small taper hole.
Thanks in advance

Ok, I put the old and the new slave cylinder up and using the pin that I had and it's about 10-15mm short, so I will make a new pin from a screwdriver I broke the handle from and will see what happens.

Ok so I know the one your talking about, thankfully it's not the pivot one as that's inside the box and I didn't want to change that one lol, I still have my old slave cylinder so I will make a new pin that's about 10mm longer and try that.
Thanks

So is it the clutch slave cylinder pin that is too short?? Or is it the clutch pivot pin that is too short??

Crash bandicoot wrote:you can always just get a 110mm M8 or M10 bolt and grind it down to suit. it is just a pin after all.

Yeah making one sounds easier then finding one, would that work or be suitable to us a bolt. Don't want to do anything that would stuff it up

Something about using the pivot pin from a manual R20 Terrano II R30a, the Mistral looking Terrano, but think only the Auto Mistrals are in NZ, Jap imports. Or making one??? Did you use the V6 crossmember? Which Drive shaft fits? Shoot, I knew it was going to be something like that......guess I'm ...

Well I needed a new slave anyway so I bought a QD32 one and it looks exactly the same as my TD27 one. The only drama it didn't come with the pin so I'm guessing its of to the wreckers and get a QD32 pin and see what the length difference is

Thanks for that I will try an send him a pm, just need to know if I was suppose to swap bell housings or will it work with the qd32 bell housing, and will I need a qd32 slave cylinder. As I said I have put the qd32 gearbox and bell housing in all bolted up sweet but when I pushed the clutch in ...

Thanks for that I will try an send him a pm, just need to know if I was suppose to swap bell housings or will it work with the qd32 bell housing, and will I need a qd32 slave cylinder. As I said I have put the qd32 gearbox and bell housing in all bolted up sweet but when I pushed the clutch in pedal ...

Hi all, I am wanting to talk to someone who has done the gearbox swap from the td27 gearbox to the qd32 gearbox.

I have just done the swap and need to clarify a few things
Thanks in advance
David

Yeah factory turbo

Hey all, I am basically after a shopping list of what I need to buy to replace my td27 gearbox with a qd32 gearbox. I have read that you need a tailshaft for ???model and you need crossmember for ??? Model. Has anyone done this exchange and if so what did I need and from what model do I get it from ...