Search found 37 matches

by pudd99
Wed Apr 14, 2021 12:45 pm
Forum: Drivetrain / Suspension
Topic: Hdj81 vx diff housings
Replies: 1
Views: 1636

Hdj81 vx diff housings

Does anyone know how to tell the difference between a front locking diff housing and non locking housing?
Cheers
by pudd99
Wed Jan 27, 2021 4:54 pm
Forum: 4WD Parts
Topic: 80 series
Replies: 1
Views: 2290

80 series

I have a 95 24valve vx triple locked and am on the hunt for a whole front end hub to hub preferred, if anyone can help?
by pudd99
Thu Jan 21, 2021 6:38 pm
Forum: Having problems?
Topic: Hdj81 both wheels leaning drivers side at the top
Replies: 8
Views: 4690

Re: Hdj81 both wheels leaning drivers side at the top

Yeah man, using a straifght edge and good eyesight the drivers side is just as bad, could anyone help me in the way of finding a new housing?
by pudd99
Thu Jan 21, 2021 8:26 am
Forum: Having problems?
Topic: Hdj81 both wheels leaning drivers side at the top
Replies: 8
Views: 4690

Re: Hdj81 both wheels leaning drivers side at the top

No movement in kingpins, iv checked them also, and their bearings are ok too.. might just havto bite the bullet and take it to the shop
by pudd99
Wed Jan 20, 2021 11:46 am
Forum: Having problems?
Topic: Hdj81 both wheels leaning drivers side at the top
Replies: 8
Views: 4690

Re: Hdj81 both wheels leaning drivers side at the top

Yeah hard to find one in wanaka though
by pudd99
Tue Jan 19, 2021 7:36 am
Forum: Having problems?
Topic: Hdj81 both wheels leaning drivers side at the top
Replies: 8
Views: 4690

Re: Hdj81 both wheels leaning drivers side at the top

Its about the same both sides, i have checked king pins and bearings.
I suspect iv bent something serious?
by pudd99
Tue Dec 29, 2020 9:32 am
Forum: Having problems?
Topic: Hdj81 both wheels leaning drivers side at the top
Replies: 8
Views: 4690

Hdj81 both wheels leaning drivers side at the top

What have i bent?
Both front wheels leaning to the drivers side at the top \ \ king pins and everything else seem fine that i can see.. would axle and housing bent cause this?
Thanks
by pudd99
Fri Nov 20, 2020 5:46 am
Forum: Toyota
Topic: A442f trans temp
Replies: 2
Views: 2439

A442f trans temp

Anyone got any info/pics or direction into where to put the auberins temp sensor in their gbox?
Cheers
by pudd99
Tue Jun 30, 2020 6:05 pm
Forum: Tool Shed
Topic: Lighting rules
Replies: 2
Views: 1953

Lighting rules

I failed a wof for having 4 fog lights today in my 80 series with factory yellow foggys and two new ones on my bullbar. Didnt know you could only have 2. Kinda makes sense but anywaysss is it possible to change my yellow foggys to two normal headlights also as theyr in the same housing etc. Or a no ...
by pudd99
Thu Mar 19, 2020 4:52 pm
Forum: Toyota
Topic: 80 series
Replies: 3
Views: 2675

Re: 80 series

Oh i do like that idea! Looks good!!
by pudd99
Tue Mar 10, 2020 3:44 pm
Forum: Toyota
Topic: 80 series
Replies: 3
Views: 2675

80 series

has anyone got any photos of how they have mounted more switches in the cab of their 80??
by pudd99
Thu Aug 29, 2019 6:34 pm
Forum: Toyota
Topic: 95 80 series winch
Replies: 0
Views: 8835

95 80 series winch

interested if anyone has installed an after market winch inbehind the front bumper with a front mount intercooler?
wondering if theres enough room for clearances etc... would perfer the factory bumper look at this stage anyway. any help or advice be good
churr
by pudd99
Wed May 01, 2019 7:41 pm
Forum: Toyota
Topic: auto electrics
Replies: 0
Views: 3441

auto electrics

this may be a silly question but here goes anyways.. i have a 95 24 valve vx... weapon it has an 80w solar pannel on the roof and from my understanding it keeps the battery charged enough to run my 60l fridge and if the fridge drains too much power itl shut that off so theres enough charge to start ...
by pudd99
Fri Apr 26, 2019 8:34 pm
Forum: Toyota
Topic: 95 80 series ABS
Replies: 3
Views: 2979

Re: 95 80 series ABS

Its got it mate, cheers will do i think iv got it sussed after a mission, good to have the old girl on the rd again
by pudd99
Thu Apr 25, 2019 8:04 am
Forum: Toyota
Topic: 95 80 series ABS
Replies: 3
Views: 2979

Re: 95 80 series ABS

Even the parts numbers would be a good help
by pudd99
Wed Apr 24, 2019 6:05 pm
Forum: Toyota
Topic: 95 80 series ABS
Replies: 3
Views: 2979

95 80 series ABS

right so i am in dire need of a new left front abs sensor that plugs into the swivel hub housing and also an abs ring that goes on the outer axle/cv if anyone would know where to source? have searched far and wide but not much luck sofar, can i just undo the abs fuse or something to still drive it? ...
by pudd99
Wed Oct 10, 2018 7:30 pm
Forum: Toyota
Topic: Springs
Replies: 2
Views: 2730

Re: Springs

So how much longer shockies would i need to go with?
by pudd99
Wed Oct 10, 2018 3:08 pm
Forum: Toyota
Topic: 95 24 valve vx
Replies: 3
Views: 2949

95 24 valve vx

What diff oils to use and how many litres per diff roughly? And what is the easiest way to refill trans oil? Cant seem to find a bung.. also which oil and how much for this?
by pudd99
Wed Oct 10, 2018 3:04 pm
Forum: Toyota
Topic: Standard 80 series
Replies: 13
Views: 8202

Re: Standard 80 series

305 70 r16s mate still waiting on invoice :lol: will let you know
by pudd99
Thu Sep 27, 2018 12:58 pm
Forum: Toyota
Topic: Springs
Replies: 2
Views: 2730

Springs

Whats the advantages and disadvantages of coil spacers?
by pudd99
Thu Sep 13, 2018 12:30 pm
Forum: Toyota
Topic: Standard 80 series
Replies: 13
Views: 8202

Re: Standard 80 series

Yeah nah sorry team went with 16x8 305 75s just waiting on them to arrive :!:
by pudd99
Fri Aug 31, 2018 10:21 am
Forum: Toyota
Topic: Standard 80 series
Replies: 13
Views: 8202

Re: Standard 80 series

Yeah mate thats all good, does anyone know how much wider those bolt on flares are?
by pudd99
Thu Aug 30, 2018 6:57 am
Forum: Toyota
Topic: Standard 80 series
Replies: 13
Views: 8202

Re: Standard 80 series

Im going with some 15x10s with 33 x 13.5s on them, ill let ya know how i go
by pudd99
Tue Aug 28, 2018 9:49 pm
Forum: Toyota
Topic: Standard 80 series
Replies: 13
Views: 8202

Standard 80 series

So i need some advice on wheel sizing, i am pretty keen on some 33 12.5 size tyres but unsure what best offset for standard height? I have a 95 vx unsure what size rims also.. any help be much appreciated.. or can i go bigger than 33? :lol: :lol: i would rather not have to change and adjust too much...
by pudd99
Tue Aug 28, 2018 7:34 am
Forum: Toyota
Topic: 80 series stndard height
Replies: 2
Views: 3114

Re: 80 series stndard height

Thanks mate
by pudd99
Mon Aug 27, 2018 6:19 pm
Forum: Toyota
Topic: 80 series stndard height
Replies: 2
Views: 3114

80 series stndard height

Could anyone help me out with standard height of a 95 80 series vx??
by pudd99
Mon May 02, 2016 7:26 pm
Forum: New Members and Beginners
Topic: rear tow/snatch/recovery 80 series
Replies: 6
Views: 4259

Re: rear tow/snatch/recovery 80 series

yeah been talkin to me cobber and think thats what we'r going to do.. haha farout musta been stuck nice good, just the way we like it :lol:
by pudd99
Mon May 02, 2016 6:45 pm
Forum: New Members and Beginners
Topic: rear tow/snatch/recovery 80 series
Replies: 6
Views: 4259

Re: rear tow/snatch/recovery 80 series

ok, i was thinking of getting it modified with my tow bar.... how do people get on with those bolt on pintle hooks then??
by pudd99
Mon May 02, 2016 5:53 pm
Forum: New Members and Beginners
Topic: rear tow/snatch/recovery 80 series
Replies: 6
Views: 4259

rear tow/snatch/recovery 80 series

hey all just wondering what people use on their 80 series as rear recovery and towing??
i have just had a hitch receiver made up and bolted into the four holes on the back with 8.8 high tensile bolts, is this sufficient enough?


tow hitch.jpg




tow hitch2.jpg
by pudd99
Thu Apr 07, 2016 6:28 pm
Forum: New Members and Beginners
Topic: 80 series 12 or 24 v
Replies: 11
Views: 9025

Re: 80 series 12 or 24 v

Right too easy thanks team!!

Go to advanced search