Offroad-Express

Batfastard

Was thinking of changeing from 3.5 to 4.1 any one done that on a rangerover . I found the gap between second and third in hi range was a bit big and forth was very tall .

Batfastard

Tuff event . But we did get the finish flag on Sunday . The start was insane .... We hid a drain and stump real hard dead stop from 90 kph on first lap cost us a wheel . Got hit in the rear . And lost it out of control sideways waiting to grip and roll but stayed up right . Lost the clutch on second...

Batfastard

We rolled end for end and then sideways very hard this morn . But we back in race . Hoping for the best

Batfastard

Yup passed . Only fault was a wee mod to fuel breather

Batfastard

Well it roars ,what a transformation.ran the cam in and then took it easy for 15 mins then drove it like i stole it...but only rev it to 5000 :D .have. Not loaded it up and given it death .but it rocks now. 105 kph in second 155 kph in third and it was only a short straight.so it was into forth and ...

Batfastard

Well got the rear radiator pipe fabed up and tacked . Bolted headers on welded flanges on the headers and made exhaust http://img827.imageshack.us/img827/6828/ea9k.jpg http://img407.imageshack.us/img407/6446/xuhj.jpg http://img405.imageshack.us/img405/3999/g2w5.jpg Went to but dizzy in and noticed t...

Batfastard

shortylux wrote:Good luck mate. I guess you don't need a pto for Taupo, but the radiator will be hard to live with out.
Sounds like I wont be to busy on the Friday so if you have any little jobs still to do once you arrive at the event, don't hesitate to ask.
Arron.
0272782556

Thanks for the offer

Batfastard

Another very frustrating day Finished painted engine mount http://img844.imageshack.us/img844/2789/yx6y.jpg Empty hole http://img13.imageshack.us/img13/9672/w7gu.jpg Ready to go into empty hole http://img694.imageshack.us/img694/5232/mv0y.jpg http://img15.imageshack.us/img15/3823/hsek.jpg http://img...

Batfastard

If you had asked me aweek ago what my race plan was i would of said i wanted to finish ,but now i just would like to start

Batfastard

Well don't let any one tell you a p76 just bolts straight in to a rangerover first job is to mod engine mounts

It was one of those days . Hope today goes better

Batfastard

Made up a front and rear driveshaft hoop. They need a clean up and paint Front http://img5.imageshack.us/img5/2264/kdt6.jpg This one bolts on in the same place under the diff as the steering damper. As it travels up and down with diff it will never hit the driveshaft Rear http://img818.imageshack.us...

Batfastard

Today went well got through a few jobs. Got the disco 2 fuel tank mounted on the rear so we now got 172 ltr of fuel http://img545.imageshack.us/img545/1589/optb.jpg Tank in place going to mount a pump and transfer into main tank http://img266.imageshack.us/img266/3097/1zor.jpg Had to remount spare h...

Batfastard

Some pics of a few jobs completed last week. One ten cable handbrake . Works mean as http://img547.imageshack.us/img547/7622/kskb.jpg I love this mod moved the vacume centre diff up onto the gear lever. As when harnessed in I can't reach it on the floor http://img690.imageshack.us/img690/842/0dv2.jpg

Batfastard

Put the 31.10.5x15 tyres on that we are going to run for the t1000 Big thanks to ace 4wd in ch ch for there generous help with the rubber . The smaller wheels and the increase in hp will help us out of the corners http://img29.imageshack.us/img29/6592/vruw.jpg http://img818.imageshack.us/img818/7460...

Batfastard

Got the twin shocks on the front now. http://img138.imageshack.us/img138/4928/duc8.jpg New vented disks flash pads and replaced all rubber and steel hoses and lines http://img607.imageshack.us/img607/3474/am4n.jpg Swapped the steering arm for a disco one sits abut higher. Went for the upgraded arms ...

Batfastard

was going up for support but my bro in law didn,t finish his buggy in time .several wgtn 4wd guys doing it thou ,brian howat in a disco,warren jefferys in a buggy ,don morgan in a cj5 jeep.should be an awesome weekend .good luck mike .make sure you have a good kidney belt :D Been looking but cant f...

Batfastard

It's a wrap .its all together and turns over free .

Just need to make it roar now

Batfastard

Hey skid my 2 cents worth. Put your link up at roof hight .i put mine at there because how many times have you had water up to your bum in your truck

Batfastard

We have had a couple of bad days getting the motor back together . Starting with a big fxxk up that I have to own 12 months ago I sent the p76 heAds away to get ported . Not even I sent some rover ones away by mistake . But all good the only diffrance in one row off bolts that we don't need to use a...

Batfastard

I did one about a year ago i hit them three or for times with big hammer and got the 1/2" rattle gun on them .it work for me .

Batfastard

how much u wana spend I looked in to this when I had my 7 seater coupe http://www.longranger.net/page4/page3/files/page3-1001-full.html http://www.longranger.net/page8/page11/files/page11-1000-thumb.jpg or if u wana go http://ih3.redbubble.net/image.3453936.0299/flat,550x550,075,f.jpg I was going t...

Batfastard

Chopping mine into a single cab was the biggest mistake I made with the 60 (so far :mrgreen: ) wish I had a back seat to take the brats with me. :( Both look cool as tho, personally I like the orange one. Im hearing your pain tom.when useing it to tow my comp truck most events u need a co offender ...

Batfastard

Depends on your needs and what trips your doing with it, if your wanting to be able to do anything in town, pick up some shopping etc as well as 4wding, then 2nd one would have more secured storage and cargo area. If your wanting to do the tough tracks and be able to get hold of your recovery gear ...

Batfastard

I've just bought a two door disco body of trade me. I've also got a td5 motor and 5spd to power it with.i want to cut it down into a ute .to use as a daily driver . Not sure weather to keep the back seat or not . The two designs I like are these http://img541.imageshack.us/img541/6293/8ygu.jpg http:...

Batfastard

I can hook a brutha up as well

Batfastard

Batfastard

The front bump stops mounted . There was no room to mount them so they bump on on the diff so welded a plate on radius arm seems to work good

Batfastard

mazdamike wrote:what gain do u get from the girdle?

When you give it the big squirt the block dose not twist and the crank fall out

.thats why chev went to four bolt mains.

Batfastard

Cheer

Batfastard

Is a 265.75.15 much diff to a 31.10.5x15 cheers

Search found 354 matches

Changeing diff ratio

Re: Six million $ strange rover comp truck

Re: Taupo 1000 updates pleeeease

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Taupo 1000

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Taupo 1000

Re: Six million $ strange rover comp truck

Re: first surf build.

Re: Six million $ strange rover comp truck

Re: v8 barbie make over.....

Re: Disco ute chop advice

Re: Disco ute chop advice

Re: Disco ute chop advice

Disco ute chop advice

Re: Wtb dyna blue winch rope

Re: Tomsoffroad & Customs

Re: Six million $ strange rover comp truck

Re: Six million $ strange rover comp truck

Re: Tyre size diffrance help

Tyre size diffrance help