Search found 312 matches
- Thu May 18, 2017 6:09 pm
- Forum: Events
- Topic: KIWI 4x4 Teams Challenge
- Replies: 22
- Views: 19071
Re: KIWI 4x4 Teams Challenge
Tried to enter last year, we didn't receive a reply. I'm keen to get there sooner or later but it's the South Island winch challenge series has started & a lot of people will be doing that.
- Tue Feb 14, 2017 6:58 am
- Forum: Diesel Engines and Modifications
- Topic: Davies Craig electric water pump and controller
- Replies: 7
- Views: 5256
Re: Davies Craig electric water pump and controller
I've been running a rear mounted radiator for years on a patrol, have just used original engine driven pump. Never had any problems. I'd ditch the electric pump, more hassle that you don't need.
- Fri Jan 20, 2017 7:26 am
- Forum: Tyres
- Topic: Why no Maxxis Tyres?
- Replies: 29
- Views: 14429
Re: Why no Maxxis Tyres?
I'm the opposite mate, my Treps are 37's and I use them mostly on the West Coast. Them and twin locked gets me a lot of places. I did a trip late last year in which my lockers were playing up due to the compressor having a cardiac arrest and I drove through mud etc on thge treps and open diffs where...
- Thu Jan 19, 2017 6:49 am
- Forum: Tyres
- Topic: Why no Maxxis Tyres?
- Replies: 29
- Views: 14429
Re: Why no Maxxis Tyres?
Club did a farm trip late last year, majority on 35" silverstones one on 37 Treps. V8 so plenty of power but no traction on a typical wet,muddy farm, huge difference. Wouldn't buy treps for NZ conditions.
- Fri Nov 18, 2016 5:46 am
- Forum: Nissan
- Topic: What are these worth??
- Replies: 7
- Views: 2476
Re: What are these worth??
Pmed you
- Fri Oct 14, 2016 6:27 am
- Forum: Projects / Mod's
- Topic: An Un-named Outlaw...
- Replies: 55
- Views: 30269
Re: An Un-named Outlaw...
Brake is the complicating issue with a god winch, don't think they bother with them in Malaysia.
- Mon Oct 10, 2016 7:32 am
- Forum: Tool Shed
- Topic: Sharpening up me old sneakers
- Replies: 3
- Views: 902
Re: Sharpening up me old sneakers
I did something similar to my triple blocks, took out every 2nd block on all 3 rows & sharpened up the side biters. Still going 4 years later but 2 have bad air leaks. Only use them for woodhill & maratoto now, running silverstones for farms & comps etc.
- Sun Oct 09, 2016 8:12 am
- Forum: Nissan
- Topic: Y61 front axle into Y60?
- Replies: 6
- Views: 2085
Re: Y61 front axle into Y60?
Y61 slightly wider, 50mm, bigger cv's, twin pot calipers.
Not LSD tho.
Not LSD tho.
- Fri Oct 07, 2016 6:24 am
- Forum: Tool Shed
- Topic: Best place to buy synthetic winch rope?
- Replies: 18
- Views: 4752
Re: Best place to buy synthetic winch rope?
I'd put that in the cheap chinese crap basket. Looks like the same stuff sold by Mudstuck. From experience I wouldn't bother.
- Thu Oct 06, 2016 7:26 am
- Forum: Tool Shed
- Topic: Best place to buy synthetic winch rope?
- Replies: 18
- Views: 4752
Re: Best place to buy synthetic winch rope?
Don't waste your money on cheap chinese rope, it's crap & won't last. First time you use it good, 2nd time maybe good after that no good. If your only doing the occasional winch stick to wire, last a lot longer than cheap rope just have to take the proper safety precautions. Otherwise spend the ...
- Fri Aug 26, 2016 5:56 pm
- Forum: Land Access / DOC legislation / Regulations
- Topic: Maratoto (often known as the “Wires Track”)
- Replies: 17
- Views: 13013
Re: Maratoto (often known as the “Wires Track”)
I'd be keen to help.
- Wed Aug 17, 2016 7:34 am
- Forum: Drivetrain / Suspension
- Topic: Radius arm rose joints
- Replies: 3
- Views: 3099
Re: Radius arm rose joints
Changed mine to a screw on arrangement running 80 series bushes with drop boxes, not road legal. Did it to eliminate stupid rod to chassis bushes that keep failing & to correct castor angle.
- Wed Aug 10, 2016 5:35 pm
- Forum: 4WD Parts
- Topic: Wtd td42 vacuum pump
- Replies: 6
- Views: 1123
Re: Wtd td42 vacuum pump
Whats wrong with yours? Theirs not a lot in them to go wrong.
- Tue Aug 09, 2016 8:12 am
- Forum: 4WD Parts
- Topic: Wtd td42 vacuum pump
- Replies: 6
- Views: 1123
Re: Wtd td42 vacuum pump
No, you'd have to remove it.
- Mon Aug 08, 2016 7:16 am
- Forum: 4WD Parts
- Topic: Wtd td42 vacuum pump
- Replies: 6
- Views: 1123
Re: Wtd td42 vacuum pump
I've got some lying around, coarse or fine spline?
- Fri Aug 05, 2016 8:44 am
- Forum: Toyota
- Topic: Diffs 80 or Saf?
- Replies: 5
- Views: 1650
Re: Diffs 80 or Saf?
Depends what your doing with it, patrol diffs are way stronger than 80's, seen plenty of 80's fail.
Re: Novawinch
Can't really give advise on electric winches as I run PTO but IF you ever need help after purchasing a Novawin Phil Clarke is excellent to deal with, unlike another person who sells a different brand of winches in NZ.
- Thu Jun 09, 2016 5:43 pm
- Forum: Tyres
- Topic: AT/M, MT, Tyre Options, Safari.
- Replies: 5
- Views: 4162
Re: AT/M, MT, Tyre Options, Safari.
Maxxis Buckshot are worth a look, reasonably priced. I put them on a LWB patrol, drove to chch from auckland for a trip up the rivers in the Canterbury high country, went well. Decent road manners, didn't really get in too much mud. Don't know about longevity as I sold the truck.
- Sat May 28, 2016 9:28 am
- Forum: 4WD Parts
- Topic: TB42 Bellhousing
- Replies: 2
- Views: 782
Re: TB42 Bellhousing
I've got one in Auckland.
- Sat May 28, 2016 9:27 am
- Forum: Drivetrain / Suspension
- Topic: 1990 Safari Death Wobble, and a Clunk.
- Replies: 20
- Views: 10552
Re: 1990 Safari Death Wobble, and a Clunk.
9 out 10 times this problem will be caused by panhard bushes, even if they look & feel ok I've changed them & it fixed the problem. Pull your panhard off get some genuine Nissan bushes pressed in & it should sort it out.
- Mon May 23, 2016 5:15 pm
- Forum: Nissan
- Topic: HELP!! SAFARI DEMON
- Replies: 5
- Views: 1533
Re: HELP!! SAFARI DEMON
Somebodies plumbed the tappet cover valve into the chassis rail so your getting all the blow by hazing out of the chassis
- Mon May 23, 2016 10:51 am
- Forum: Events
- Topic: Mudfest 2016
- Replies: 6
- Views: 6605
Re: Mudfest 2016
They were aiming it more at the tradie with a 4x4 ute, came to our club meeting last week to explain. I agree $80 for driving around in a flat, muddy paddock is expensive & doesn't interest me, but I think they have quite a few going. Biggest concern will be the safety aspect, hopefully they'll ...
- Tue May 17, 2016 7:43 am
- Forum: Tool Shed
- Topic: Synthetic sheathed winch rope
- Replies: 6
- Views: 2008
Re: Synthetic sheathed winch rope
Hampidjan in timaru for factory made overbraid Dynex Dux its super expensive shit but you get about 10 times the life out of it compared to other brands :wink: Dynex Dux is very good rope. I'm not convinced about the benefit of overbraid though. I used it on one of my ropes, good : rope stays the s...
- Thu May 05, 2016 8:10 am
- Forum: Tool Shed
- Topic: Electrics- 24v to 12v
- Replies: 14
- Views: 2732
Re: Electrics- 24v to 12v
It would be a lot easier, cheaper & better to change the starter motor & glow plugs.
- Thu Apr 14, 2016 7:22 am
- Forum: 4WD Parts
- Topic: 15x10 Rims
- Replies: 25
- Views: 3531
Re: 15x10 Rims
Your better off running 8' rims, you'll continuously knock the tyres off the bead offroad with 10" rims.
- Thu Mar 31, 2016 6:27 am
- Forum: Projects / Mod's
- Topic: Blowen 87 series Landcruiser
- Replies: 440
- Views: 101943
Re: Blowen 87 series Landcruiser
How does the winch brake work on the PTO? Or is it a worm drive?
- Fri Mar 18, 2016 4:24 pm
- Forum: Nissan
- Topic: Saf sprite steerng box
- Replies: 31
- Views: 7993
Re: Saf sprite steerng box
I'll have a talk with you at Possum Tim
- Fri Mar 18, 2016 6:14 am
- Forum: Nissan
- Topic: Saf sprite steerng box
- Replies: 31
- Views: 7993
Re: Saf sprite steerng box
I'm looking at doing the same soon. Thinking rear the best option, slightly better protectored, existing mounting arms, front would need a mod on drivers side & panhard in the way. Cons hard to get the diff head out unless everything is un-boltable & I bend the rear tie rod more than the fro...
- Thu Mar 17, 2016 4:59 am
- Forum: Nissan
- Topic: Saf sprite steerng box
- Replies: 31
- Views: 7993
Re: Saf sprite steerng box
Andy 79465? Think he has sold it though.
- Wed Mar 16, 2016 4:59 pm
- Forum: 4WD Parts
- Topic: Runva winches still the go?
- Replies: 8
- Views: 2294
Re: Runva winches still the go?
Give Phil a call http://www.force4.co.nz/. Might pay to wait a couple of days, think he's in Aussie