Offroad-Express

De-Ranged

Class 10 motorcycle powered off road racer run a search for the "edge barracuda" I have the plans for this but there are some things i'd like to change.... improve on lol (well I'd like to think I'm improving the design) The air shocks arn't ideal but due to the weight or lack of it they w...

De-Ranged

Not at the moment but i have a speed racer project planed for the future

De-Ranged

Thanks for that tip I didn't know that I'll save the y60 d/s for the toy This isn't about angle and suspension travel in fact im going to run a limiting strap on top of the diff to limit suspension drop to about 4" but still allow full range of articulation I need the double carden joint to eli...

De-Ranged

Im in need of a Double Carden Joint for the rear drive shaft on a project landy, the motor and box are Safari TD42 so looking for something I can source this joint from of comparable size The truck I got the motor and box from didn't have any and I can't recall ever seeing a patrol with one Cheers R...

De-Ranged

LOL as an ex southlander i have found the further south you go the freindly'er people are.... that doesnt mean they arent helpfull, just a bit more cautious Give us some more info are you in a camper, 4wd, a car do you have a tent are you interested in camping over in nice spots how long you got to ...

De-Ranged

Wired if it helps i could pick it up and bring it to Napier, catch is i've just had surgery and wont be back at work for about 5 weeks
If its to much hassle i'd be keen to grab it as i need 1 more for my set

Cheers Reece

De-Ranged

before you go and buy a 15" center from any of the stock car supply shops measure the inside of your hoop.... I was just about caught a few yrs back there was a 5mm difference on there hoop dia vs mine Also a hit like that could have warped the hoop.... easy measure for this is with the tyre of...

De-Ranged

fill your tyres with grass or water this stops them popping, just thinking about it check the track rules I've noticed different places have different rules about a derby.... when I did it we were all parked up in the center of the track and it was a free for all, I've noticed the napier club its mo...

De-Ranged

Does this mean they aren't "a suitable rim for the use intended" under LVVTA..... was looking at cutting the centers out and fitting them to a set of 15x10" rim hoops, I also like that old school look but want to run a wider tyre and with cert manufactures recommendations are law so n...

De-Ranged

The stuff you want is the black windscreen sealant I think the generic term for it is mastik, a brand name for this stuff is Selastic It doesn't fully cure so remains flexable, a good example of how good it is... I've glued the rear reflectors on my hydro truck on with it, I was this with a pulsing ...

De-Ranged

I've just tried partzonline.co.nz there was a stuff up with some of my order couriered from another depot and it didn't arrive.... they have been real good to deal with it about and they are sending another set to my work for me Price wise they are at the trade price for what I was buying and they a...

De-Ranged

as stated a full re-check the catch is for stuff that was certed some time back is rules change and the re-check is on the up to date rules.... one especially to watch out for is steering mods

De-Ranged

Have a look on http://www.aulro.com/afvb/
A good bunch of guys... and alot of info on the Isuzu conversion

De-Ranged

Message a member on here "littlepigzuk" he runs landrover spares up here in Jaffa land, he has a few wagons out back he is wreaking he may have one
If it helps I take a small truck home (Napier) every couple of weeks so I could cart it for ya

De-Ranged

you need to lift your shed, your door isn't big enough

De-Ranged

Gidday

I'm after a pair of vented front disk calipers from either the Defender or the 110 / 90

Reece
027 541 8794

De-Ranged

LOL all good got it now thanks

De-Ranged

Trying to find rover spares number or Rexs number white pages and Google have drawn a blank

De-Ranged

Can't say for certain on this one... but I have used SC battery box's before, they are cheap lol the anchor strap has these light weight plastic clips that arn't up to the job of securing a battery, broke one just theading the strap lol
Have a look before you buy

De-Ranged

I'll more than likely block but it still lets the moisture out of the crap that gets stuck in there, that way you don't get as much corrosion potential same as a chassis bits catch mud but its dry and there isn't any corrosion lol well thats the theory Just thought I'd mention it in case the drain h...

De-Ranged

What about a drain for the shock pocket ?

Looking very good

De-Ranged

I call fake..... and not even a good one lol

Oh and Rex call me some time I have an axle at work that has been there for months lol I've lost your number
027 541 8794

De-Ranged

lol goes both ways I'll look into that 16mm as I might be wiring a shed soon cheers

De-Ranged

Yea you have to be careful with the outer ceramics they are more fragile as they are cooling down..... about the time you have finished cutting put the torch down carefully taken your mask off and time to turn away from the table... with the cord twisted so it catches your foot and you drag the torc...

De-Ranged

The bluebird calipers are about as good as original drums they just don't have the same issue as drums do with mud, that same caliper with slight variations in mount offset difference and hand brake pull direction can be found on the rear of alot of cars, arx bluebird, several different models of th...

De-Ranged

I got one of the Mitech 40 amp, got good reviews and full parts supply think the guy dealling them is on trademe if not run a search on google he's in CHCH and is happy to ship stuff I've tried a number of different hand pieces and tips the most reliable and cheapest is the original PT31 torch with ...

De-Ranged

Any damage to the turbo ??

De-Ranged

Yes you are right sorry late night doing maths my brain wasn't clicking Personally I'd use main spring rate for calc as it will build in some more strength I know it's nice to engineer to the load but 4wding is a rough sport and our environment is so varied I know you've probably mentioned this but ...

De-Ranged

With springs in series and they are still both free to move you do not add the forces, you would if they were in parallel ( side by side ) No Only use combined spring rate if neither spring bottoms or stops your springs will both travel so you have rate x unit of travel for both I prefer metrics lo...

De-Ranged

Very interesting.... thank you, not to many threads carry this sort of tech and its where I want to get too lol quite a few units to get through first tho Just something I have picked up from the desert racing sites they have alot of concern about getting the mount points for the shocks under the ce...

Search found 1872 matches

Re: Any Interest in FOX AIR SHOCKS

Re: Any Interest in FOX AIR SHOCKS

Re: Safari Double Carden Joint

Safari Double Carden Joint

Re: N I places suggestions

Re: WTD: Range Rover Rostyle steel rims

Re: Rim repair

Re: Demo derby advice?

Re: WTD: Range Rover Rostyle steel rims

Re: Strong "Sealant" for windscreen

Re: Where to go for parts

Re: Changes to a certed vehicle

Re: Do i keep the disco?

Re: Do i keep the disco?

Re: new 1uz gen1 project

WTB Defender or 110/90 vented calipers

Re: rover spares number?

rover spares number?

Re: Powered Battery Box

Re: Checkerheads new project.

Re: Checkerheads new project.

Re: carefull with your cutoff wheels

Re: Plasma cutters??

Re: Plasma cutters??

Re: Hilux disc conversion combinations

Re: Plasma cutters??

Re: Expected life of EGT Sensor

Re: Checkerheads new project.

Re: Checkerheads new project.

Re: Checkerheads new project.