PROJECT PAJERO

User avatar
Zukin
Hard Yaka
Posts: 103
Joined: Wed Dec 11, 2002 12:00 pm
Location: Hawkes Bay
Contact:

PROJECT PAJERO

Postby Zukin » Thu Jul 24, 2003 10:14 pm

Well you have all heard about Project Prado, now its time for Project Pajero :D

I own a 1993 2.8 Turbo Diesel SWB Mitsi Pajero.

I have been using it for easy 4wd runs, and will continue to. However I want to modify it so I can use it for extended trips (Safari's and camping etc), so I need to modify it a little.

So join me as I turn this normally used for shopping :wink: 4wd into a well setup (I am not sure of the well bit :wink: ) Crusin 4wd.

Mods/Additions that are required

1. Tyres/wheels
2. Suspension
3. Engine
4. Storage/roof system
5. Protection
6. Equipment
7. Auxillary Equipment
8. Navigation
9. Safety
10. Communications
11. Problems

I will whenever I make a change put the number in the note
EG if I add a Radio I will write in the subject line
PROJECT PAJERO #10- Added a CB radio


Now something that people always ask about = BUDGET
I dont have loads of cash so I want to do this on a budget, but without jepodising safety or comfort. So wherever possible I will list the prices.

If you have any ideas or suggestions please feel free to post them or PM me with your ideas.

Also the parts or things I do may not always be what you would do or use, but each idea I do will be for a reason.
Remember I will be using for longer Safari type trips, not for the Tough Truck bash!
Thats what I want a Suzuki for ! :D

User avatar
suzukisam
Driver/Navigator
Posts: 47
Joined: Mon Dec 09, 2002 12:00 pm
Location: Waikato
Contact:

Postby suzukisam » Fri Jul 25, 2003 10:03 am

Scott, here is the ultimate bush truck for ya. It's the same as mine, only it got all the mods on my wish list too.... 8O

Lester

96 Suzuki Samurai Coil Sprung [Palmerston North]
Fully set up Club Truck..Club 4x4 or Hard Yakka!
Custom Suspension with extended coils and Rancho's.
Body lifted
Steel rims with near new 30x9.5 Yokohama Geolander MT's.
Rancho front Mount electric winch
Custom winch and light bar (Alloy)
ARB Rear Diff Lock
Roll Bar
Uprated alternator with Optima 1000cca Batt
"Rock Hopper" transfer case (Super Low gearing)
Undergoing certification now.
travelled only 46000 kms, NZ New.
Awesome toy..but Wife says sell!
Many 4x4 accessories available by negotiation.
Photos available on request..just email me
$11,000.00 Email:elliott.clulee@xtra.co.nz
Ph.0274 460715

User avatar
Bodge
Hard Yaka
Posts: 144
Joined: Thu Apr 10, 2003 12:00 pm
Contact:

Postby Bodge » Fri Jul 25, 2003 11:21 am

Tell him hes dreamin....
The three position Lucas switch - Dim, Flicker and Off.http://home.off-road.com/~bodgerover/

User avatar
Zukin
Hard Yaka
Posts: 103
Joined: Wed Dec 11, 2002 12:00 pm
Location: Hawkes Bay
Contact:

Postby Zukin » Fri Jul 25, 2003 12:12 pm

I know this Samurai, and I also now he has spent allot of money getting up to spec
However I want to custom build mine, exaclty how I want it

Cheers

User avatar
suzukisam
Driver/Navigator
Posts: 47
Joined: Mon Dec 09, 2002 12:00 pm
Location: Waikato
Contact:

Postby suzukisam » Mon Jul 28, 2003 10:22 am

That's actually not bad value, mines close to that spec (minus rear diff lock and roll bar) and will have cost him a lot more than I've spent, and that's the $$ I've got mine insured for.
Lester
Waikato NZ
The Last Samurai

Return to “Projects / Mod's”

Who is online

Users browsing this forum: No registered users and 21 guests