bj40 build...

Lynx · Postby **Lynx** » Sun Sep 11, 2011 4:22 pm

Chur Cuz

niblik · Postby **niblik** » Wed Sep 21, 2011 4:56 pm

with much thanks to a real good fawker i got a sharp deal on some 70mm2 cable for upgradin my winch cables.. out with the old, in with the new..

then put an aerial onto the cage in this spot.. thought it may be tucked behind cage for some protection and its super flexy.. only cable tied it there though as to test it works well befire securing fully..

and for the aerial to work, ya need a radio. that good fawk looked after me again with this GME unit.. mounted it onto cage and put the hand piece close to my yap for ease to reach the clicky squawk box switch..

tomsoffroad · Postby **tomsoffroad** » Wed Sep 21, 2011 7:33 pm

Farrlash bro. Why dont you leave the ariel mount cable tied on? Then if it gets a knock or more likely a ton and a half of cruiser sitting on top of it :lol:

then the cable ties might save it.
GO THE CRUISER

niblik · Postby **niblik** » Mon Oct 24, 2011 8:25 pm

did the chasm and a few tracks around reefton and slab hut creek this weekend.. thanks go out to kbjj, jason and others for a great weekend all round. mighty fine wheelin over there.. hopefully some footage/photo's will appear..

had this rock in the carpark.. thought i'd play..

tomsoffroad · Postby **tomsoffroad** » Mon Oct 24, 2011 8:37 pm

Nice

red-devil · Postby **red-devil** » Mon Oct 24, 2011 8:38 pm

dam id forgotten how much flex you had :shock:

if only the VX would do that :mrgreen:

MNC · Postby **MNC** » Mon Oct 24, 2011 9:06 pm

niblik wrote:had this rock in the carpark.. thought i'd play..

DAMN

THAT IS AWESOME :!:

rokhound · Postby **rokhound** » Tue Oct 25, 2011 6:55 am

NICE

ClassicCruiserSpares · Postby **ClassicCruiserSpares** » Tue Oct 25, 2011 8:24 am

niblik wrote:did the chasm and a few tracks around reefton and slab hut creek this weekend.. thanks go out to kbjj, jason and others for a great weekend all round. mighty fine wheelin over there.. hopefully some footage/photo's will appear..

had this rock in the carpark.. thought i'd play..

Was an awesome weekend indeed, Couldnt of asked for better weather. I have some vids of Nibbys rig which ill post up later.

petefj40 · Postby **petefj40** » Tue Oct 25, 2011 5:32 pm

ClassicCruiserSpares wrote:
niblik wrote:did the chasm and a few tracks around reefton and slab hut creek this weekend.. thanks go out to kbjj, jason and others for a great weekend all round. mighty fine wheelin over there.. hopefully some footage/photo's will appear..

had this rock in the carpark.. thought i'd play..

Was an awesome weekend indeed, Couldnt of asked for better weather. I have some vids of Nibbys rig which ill post up later.

Sweet!
Looking forward to seeing em.

hosehustler · Postby **hosehustler** » Tue Oct 25, 2011 5:34 pm

Awesome flex Nibs.....green with envy :mrgreen:

gotta love those coast tracks :wink:

MATT4U · Postby **MATT4U** » Tue Oct 25, 2011 5:52 pm

Lookin good nibby,

wopass · Postby **wopass** » Wed Oct 26, 2011 1:18 pm

Oww my mums DX corrolla can flex more than that!... :lol:

looks bad ass bro, truely Phaat!

:mrgreen:

J_Dub · Postby **J_Dub** » Wed Oct 26, 2011 1:43 pm

rear springs look like 1 a them slinkys

oldyella · Postby **oldyella** » Thu Oct 27, 2011 5:00 pm

Thats pretty sweet nibs. Good to see a truck doing what it was made for :mrgreen:

DieselBoy · Postby **DieselBoy** » Thu Oct 27, 2011 8:22 pm

Got just the track for you!!!!!

We haven't managed to get past these bolders yet :lol:

niblik · Postby **niblik** » Thu Oct 27, 2011 9:06 pm

i'm keen cuz.. :mrgreen:

as mentioned in another thread, whislt up worsley track a while ago my panhard bush at the chassis end snapped its thread, being a weak point i changed it a tad..

from shitty little mild steel thread...

to this..

tomsoffroad · Postby **tomsoffroad** » Fri Oct 28, 2011 5:49 am

to this..

i'm keen cuz..

as mentioned in another thread, whislt up worsley track a while ago my panhard bush at the chassis end snapped its thread, being a weak point i changed it a tad..

from shitty little mild steel thread...

to this..

Posted: Thu Oct 27, 2011 7:06 pm

No fair I get told off for using the washing machine as a parts wash!!! :roll:

rangimotors · Postby **rangimotors** » Fri Oct 28, 2011 11:04 am

ha ha looks more like the oven, always handy for heating things before welding :mrgreen:

niblik · Postby **niblik** » Fri Oct 28, 2011 7:12 pm

tomsoffroad wrote:No fair I get told off for using the washing machine as a parts wash!!!

rangimotors wrote:ha ha looks more like the oven, always handy for heating things before welding

i can neither confirm nor deny any of these having been performed. :wink:

tomsoffroad · Postby **tomsoffroad** » Fri Oct 28, 2011 8:58 pm

rangimotors
Post subject: Re: bj40 build...

ha ha looks more like the oven, always handy for heating things before welding

Hahahahaha oops whos a dumbass :lol:

UBZ · Postby **UBZ** » Sat Oct 29, 2011 9:26 pm

kbjj wrote:Nibby just showed off

This is an awesome photo. :twisted:

farwty looks like its yawning , having a dordle up a little track.

niblik · Postby **niblik** » Sun Oct 30, 2011 9:52 am

it was fun tryin different lines etc.. problem is in photos ya cant quite get a feel for incline/declines.. in this photo it was reasonably steep.. and yeah man, i lurves the dawdling.. :mrgreen:

MNC · Postby **MNC** » Sun Oct 30, 2011 7:31 pm

What thread is that last photo from??? That is unreal flex!!!!! :shock:

Bigs ups to what you have built Nibs - Farken impressive

MORE PICS FROM THE ABOVE TRIP PLEASE :mrgreen:

ClassicCruiserSpares · Postby **ClassicCruiserSpares** » Sun Oct 30, 2011 7:34 pm

MNC wrote:What thread is that last photo from??? That is unreal flex!!!!!

Bigs ups to what you have built Nibs - Farken impressive

MORE PICS FROM THE ABOVE TRIP PLEASE

In this thread dude? http://www.offroadexpress.co.nz/Forums/ ... =8&t=27926

MNC · Postby **MNC** » Sun Oct 30, 2011 7:59 pm

ClassicCruiserSpares wrote:In this thread dude? http://www.offroadexpress.co.nz/Forums/ ... =8&t=27926

How did I miss that, Awesome trip - Looks like the two Cruisers ate it up :wink:

yes I am bias

DMcCready · Postby **DMcCready** » Tue Nov 01, 2011 3:56 pm

Looking like you are getting the Cruiser Dialed in Niblik!

Reefton is definately on my list for when I get home

DSTRBU · Postby **DSTRBU** » Sat Jan 14, 2012 9:19 pm

niblik wrote:made a little mount, over where the stocko handbrake went, to take the line lock to the rear wheels for a handbrake.. yet to be plumbed up..

Hey mate where abouts did you get that line locker from? How good does it work as a handbrake? Installed a hydro handbrake in my truck but its a cheap piece of crap, keeps bending!

Mint truck you got there, nice workmanship!

Cheers
Tim

niblik · Postby **niblik** » Tue Jan 17, 2012 9:31 pm

i cant remember exactly where i got it from, think from poly performance though..

http://www.polyperformance.com/shop/Jam ... -p-74.html

thinkin i'll source another too....

KROOZA · Postby **KROOZA** » Wed Jan 18, 2012 7:45 pm

Disregarding it being potentially illegal to fit a linelock, has anyone used these hidden somewhere on truck for anti-theft purpose?

Who is online