Commodore V6 Auto to isuzu transfer does anyone have any links to a tutorial or walk-through to mating these two together just trying to get an idea of what ill need before i start this project.
thanks Ash
Commodore V6 Auto to isuzu transfer
- mud_slinger
- Hard Yaka
- Posts: 1050
- Joined: Sun Oct 08, 2006 12:00 pm
- Location: christchuch
Re: Commodore V6 Auto to isuzu transfer
head to clubisuzu.com be heaps of info on there
needs more curry
0272593533
0272593533
-
- Hard Yaka
- Posts: 610
- Joined: Wed Oct 07, 2009 1:14 am
- Location: hawkes bay
Re: Commodore V6 Auto to isuzu transfer
Re: Isuzu transfer case onto series 1 Holden auto
Postby pruggerdore » Mon May 26, 2014 1:01 pm
The one I have used is from the 3.1 auto bighorn. auto has a lower first gear than manual. believe mu 3.1 MU will do it too. A particular year mu has a smaller diameter front driveshaft making trans sump clearance better but still not great for suspension travel. some transfers are part of the box and not separable.
Adapter... remove trans tailshaft cover. cut 50mm off shaft. There is a groove there telling you where to cut. make a plate to match trans bolt patern. A plate to match transfer box bolt pattern. put a piece of 100mm pipe or box section between the 2 and weld. Done.
Postby pruggerdore » Mon May 26, 2014 1:01 pm
The one I have used is from the 3.1 auto bighorn. auto has a lower first gear than manual. believe mu 3.1 MU will do it too. A particular year mu has a smaller diameter front driveshaft making trans sump clearance better but still not great for suspension travel. some transfers are part of the box and not separable.
Adapter... remove trans tailshaft cover. cut 50mm off shaft. There is a groove there telling you where to cut. make a plate to match trans bolt patern. A plate to match transfer box bolt pattern. put a piece of 100mm pipe or box section between the 2 and weld. Done.
Who is online
Users browsing this forum: No registered users and 9 guests