Shorten front pto shaft

Moderator: Mark

User avatar
kiwibronco
Driver/Navigator
Posts: 26
Joined: Tue Mar 10, 2015 6:25 pm

Shorten front pto shaft

Postby kiwibronco » Tue Jan 28, 2020 10:19 am

Hoping people still check this site. One more pto question. I've set my winch back z bit from std and now front shaft from engine mount bearing to winch distance is shorter. I'm about 25mm away from bring sble to slip it over the winch shaft. Anyone cut and shortened the front shaft? I was thinking cut 25mm out just behind the front joint sleeve and weld? Does that work?

Twodiffs
Hard Yaka
Posts: 559
Joined: Wed Mar 04, 2009 8:36 pm
Location: ShakeShake

Re: Shorten front pto shaft

Postby Twodiffs » Wed Jan 29, 2020 5:00 pm

Can't help you either way mate, once upon a time this forum used to go off every night, that's the result of social media I guess.
I don't see any reason it wouldn't work though.

User avatar
kiwibronco
Driver/Navigator
Posts: 26
Joined: Tue Mar 10, 2015 6:25 pm

Re: Shorten front pto shaft

Postby kiwibronco » Thu Jan 30, 2020 10:20 am

Thanks twodiffs. Yeah mate I use to be on here a fair bit and lots of good knowledge out there. Seems to have dried up. Re shortening the shaft. Yep had z chat to a guy that's fine it so gonna get it sorted. Cheers.

User avatar
Beer_Cruiser
Hard Yaka
Posts: 857
Joined: Tue Jun 05, 2007 12:00 pm
Location: now in B O P

Re: Shorten front pto shaft

Postby Beer_Cruiser » Wed Feb 05, 2020 4:39 pm

Ha I would check in here at least once a day . This is first time this year....
I shortened the PTO shaft on my 40.
Just cut out the bit I don't need layed the two bits of the shaft in a peace of angle to keep them straight and welded them. Still working 15 years later...

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 10 guests