WAS fume'ing (now more of a flaming thread...)

User avatar
Moriarty
Hard Yaka
Posts: 1205
Joined: Wed May 31, 2006 12:00 pm
Location: The newly formed Nation of OKATO
Contact:

Re: fume'ing

Postby Moriarty » Tue Sep 22, 2009 10:56 pm

wopass wrote:XXXX clip XXXXX
it doesnt detonate if you do it right
[/quote]

NOTHING detonates.

NOTHING not even nuke explosions, its just a very fast propagation of a wave front of pressure and heat.

Unfortunately, we dont have the words to succinctly describe the phenomenon, Pity......

Does not negate the fact that Sandy's wagon has increased (by far too much, fukkit) power, such that 'seat of the pants" testing can feel it.
Gas off, old, tired gutless fkn toyda motor. Gas ON, lots more grunt, enuff to piss me off, cos I suspect that that great heavy clumsy top heavy tank now has a better Power to Weight ratio than my beautiful tidy well designed and superb example of cross cultural cooperation, the Ssangyong!!

User avatar
Andrew1706
Hard Yaka
Posts: 716
Joined: Wed Nov 28, 2007 12:00 pm
Location: Auckland

Re: WAS fume'ing (now more of a flaming thread...)

Postby Andrew1706 » Tue Sep 22, 2009 11:19 pm

wopass wrote:read the entire thread bud :wink:


Read my entire post, bud

Andrew1706 wrote:If not, KiwiBacon misunderstood what you claimed and assumed at the engine.


This whole thread would've been avoided if the opposing parties had been discussing the same thing, not ego tripping :wink:

vvega
Hard Yaka
Posts: 972
Joined: Thu Jan 08, 2009 2:02 pm
Location: hamilton
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby vvega » Wed Sep 23, 2009 12:58 am

Andrew1706 wrote:
wopass wrote:read the entire thread bud :wink:


Read my entire post, bud

Andrew1706 wrote:If not, KiwiBacon misunderstood what you claimed and assumed at the engine.


This whole thread would've been avoided if the opposing parties had been discussing the same thing, not ego tripping :wink:

you obviously missed the bit were kiwi bacon realised he didn't understand how load was sensed on a engine and left

and im sorry .. but how do you assume a rolling road dyno gives you a flywheel measurement

i think the only assumption here was that he was all he claimed and so he was taken through the processes of what a dyno is and dose and how it measures work

i don't think anyone needs to come in here and start preaching hind site
reality is the argument started because mr bacon bagged wopass's claims.. and insisted that there is NO WAY fuming could work

i fail to see how that could be anything other than blind ignorance.. not misunderstanding
Kiwi4x4

User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby wopass » Wed Sep 23, 2009 8:05 am

Andrew1706 wrote:
wopass wrote:read the entire thread bud :wink:


Read my entire post, bud

Andrew1706 wrote:If not, KiwiBacon misunderstood what you claimed and assumed at the engine.


This whole thread would've been avoided if the opposing parties had been discussing the same thing, not ego tripping :wink:


and just as a matter of fact BUUDY :wink: (my first one was a friendly BUD so why get your knickers in a knot :lol:

the thread and discusion/debate is about FUMIGATION and the whole dyno thing was just a side chute which is just a measurement of the increase that the fume gave it. the dyno report IS WHAT IT IS, end of story, it has those numbers at the wheels full stop. its not at the engine so will be different and no where did i ever say that it was or ever will be.

and why would i be ego tripping?? this is a matter of fact fumigation works thread and nothing more, the fact that the cruiser goes like a haunted shithouse is pretty damn cool yea and anyone with a standard cruiser would be jelous :wink:

want me to give yours a tune? :mrgreen:
If you already know everything, DON'T ask bloody questions!!

User avatar
skid
Tyre Man
Posts: 6309
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby skid » Wed Sep 23, 2009 8:12 am

wopass wrote:want me to give yours a tune? :mrgreen:



it may be a while before it turns up on ya front door, but hell yeah, you will be tweaking mine




and lets not get into this shit fight bullshit again :roll:

bloody keyboards :roll: :roll: :roll: :mrgreen:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*

User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby wopass » Wed Sep 23, 2009 11:26 am

skid wrote:
wopass wrote:want me to give yours a tune? :mrgreen:



it may be a while before it turns up on ya front door, but hell yeah, you will be tweaking mine




and lets not get into this shit fight bullshit again :roll:

bloody keyboards :roll: :roll: :roll: :mrgreen:


hahha, hey if i hitch a ride down there for that thing that young fullas having at rallywoods.... and yours is running by then, ill do yours and his at the same time while im there :wink: or you could get that other fulla to do it, theres all the information on the net if he looks in the right place 8)
If you already know everything, DON'T ask bloody questions!!

vvega
Hard Yaka
Posts: 972
Joined: Thu Jan 08, 2009 2:02 pm
Location: hamilton
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby vvega » Wed Sep 23, 2009 4:05 pm

can confirm that bens cruiser surprised me with highway acceleration .. it really is quite impressive
:D
Kiwi4x4

User avatar
darinz
Hard Yaka
Posts: 1265
Joined: Wed Nov 07, 2007 12:00 pm
Location: Whangarei

Re: WAS fume'ing (now more of a flaming thread...)

Postby darinz » Fri Sep 25, 2009 2:06 pm

The wheel hp or torque to flywheel hp or torque arguement is always a shit fight! So many variables that anyone who says they can calculate it accurately is full of it!
The dyno figures used here are so good because they show before and after, anything else is just BS. Even saying you have 1400nm at the wheels is irrelevant as change gear and the torque changes so it also doesn't mean much.

So like I said before 118% improvement is frikking cool anyway you look at it and it wasn't a complete slug to start with!

So the end result of this 28 page shit fight is Wopass's 80 goes really well and just maybe he has an idea of what he is doing! :lol:

As for the fume'ing info. Who cares? It is safe and it produces power, only a brain dead moron would argue against that! :lol:

(It;s Friday afternoon and I can't finish the work I want so I'm bored!!! :mrgreen: )
Nissan Terrano coilovers, turboed VH45, Safari axles, and some other stuff.

User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby wopass » Fri Sep 25, 2009 2:47 pm

its not mine !! i could never afford to do to mine what has been done to that one :o

but mine does go ok yea... just ask D.B :twisted:
If you already know everything, DON'T ask bloody questions!!

User avatar
DieselBoy
Hard Yaka
Posts: 4567
Joined: Sun Nov 14, 2004 12:00 pm

Re: WAS fume'ing (now more of a flaming thread...)

Postby DieselBoy » Fri Sep 25, 2009 3:51 pm

wopass wrote:its not mine !! i could never afford to do to mine what has been done to that one :o

but mine does go ok yea... just ask D.B :twisted:



It was a bit like a drag race between The 50 and your 40 Series :lol: :lol:

I'm very tempted to squeeze some more PSI into mine, but I'm really nervous about turning thing's up anymore than i have with out a Pyro :lol:

We all know what Toyota's and cylinder head's are like :evil: :evil: :evil: :evil:
lax2wlg wrote:Is that like saying 'she's hot, for a crackwhore??

User avatar
lilpigzuk
Tiger Balm
Posts: 2310
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Re: WAS fume'ing (now more of a flaming thread...)

Postby lilpigzuk » Wed May 19, 2010 9:57 pm

Was such an awesome thread, thought I would add to it :lol:

I believe an ore member is cranking out approx 4000nm out of his 4 cylinder zuk :mrgreen: and yes its true 8)

User avatar
Heath
Hard Yaka
Posts: 3297
Joined: Thu Dec 12, 2002 12:00 pm
Location: Rolleston, Chch

Re: WAS fume'ing (now more of a flaming thread...)

Postby Heath » Wed May 19, 2010 9:59 pm

lilpigzuk wrote:Was such an awesome thread, thought I would add to it :lol:

I believe an ore member is cranking out approx 4000nm out of his 4 cylinder zuk :mrgreen: and yes its true 8)


Grave digger. :mrgreen:

User avatar
lilpigzuk
Tiger Balm
Posts: 2310
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Re: WAS fume'ing (now more of a flaming thread...)

Postby lilpigzuk » Wed May 19, 2010 10:00 pm

actually wasnt that much of an awesome thread, but phuck it.....

User avatar
Heath
Hard Yaka
Posts: 3297
Joined: Thu Dec 12, 2002 12:00 pm
Location: Rolleston, Chch

Re: WAS fume'ing (now more of a flaming thread...)

Postby Heath » Wed May 19, 2010 10:02 pm

lilpigzuk wrote:actually wasnt that much of an awesome thread, but phuck it.....


Yeah, for a while there it was like being on Outerlimits again. :twisted: Might go there and ask a newb question just for the hell of it. :mrgreen:

whitetrash
Bush Crasher
Posts: 71
Joined: Thu Jun 11, 2009 9:15 pm

Re: WAS fume'ing (now more of a flaming thread...)

Postby whitetrash » Wed May 19, 2010 10:25 pm

Andrew1706 wrote:
This whole thread would've been avoided if the opposing parties had been discussing the same thing, not ego tripping :wink:


Hey im keen for some mroe ego tripping, it is the bees knees if you can see your knees.,

or someone to sortout a fumigation of my 4JG2? I've lost a bit of power recent an need it all back,

User avatar
UBZ
Hard Yaka
Posts: 1630
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: WAS fume'ing (now more of a flaming thread...)

Postby UBZ » Wed May 19, 2010 10:27 pm

lilpigzuk wrote:Was such an awesome thread, thought I would add to it :lol:

I believe an ore member is cranking out approx 4000nm out of his 4 cylinder zuk :mrgreen: and yes its true 8)


got a dyno chart to prove it :mrgreen: it would detonate
LR110 ..... LJ50 project :roll:
Chris.

User avatar
mroffroader
Hard Yaka
Posts: 2330
Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby mroffroader » Wed May 19, 2010 10:35 pm

UBZ wrote:
lilpigzuk wrote:Was such an awesome thread, thought I would add to it :lol:

I believe an ore member is cranking out approx 4000nm out of his 4 cylinder zuk :mrgreen: and yes its true 8)


got a dyno chart to prove it :mrgreen: it would detonate


It has a 4age-t and yes he will have a dyno chart to prove it....

http://www.facebook.com/#!/photo.php?pi ... 9417619306
80 series tow bus towing a redneck ass vitara :D

User avatar
UBZ
Hard Yaka
Posts: 1630
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: WAS fume'ing (now more of a flaming thread...)

Postby UBZ » Wed May 19, 2010 10:42 pm

mroffroader wrote:
UBZ wrote:
lilpigzuk wrote:Was such an awesome thread, thought I would add to it :lol:

I believe an ore member is cranking out approx 4000nm out of his 4 cylinder zuk :mrgreen: and yes its true 8)


got a dyno chart to prove it :mrgreen: it would detonate


It has a 4age-t and yes he will have a dyno chart to prove it....

http://www.facebook.com/#!/photo.php?pi ... 9417619306



owh , thats no fun , this is supposed to be a flaming thread opps i mean fuming 8)
LR110 ..... LJ50 project :roll:
Chris.

User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby wopass » Tue Jul 05, 2011 11:23 pm

BUMP...just because its O for OSUM!!!

:mrgreen:
If you already know everything, DON'T ask bloody questions!!

User avatar
flyingbrick
Hard Yaka
Posts: 1725
Joined: Sun Jan 18, 2009 7:36 pm
Location: Hamilton/Auckland
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby flyingbrick » Tue Jul 05, 2011 11:36 pm

whatever did happen to kiwibacon?
phone Ross Bolus (secretary of the BOP club) He'll save you.

User avatar
LOLYF
Hard Yaka
Posts: 712
Joined: Fri Feb 03, 2006 12:00 pm
Location: west auckland

Re: WAS fume'ing (now more of a flaming thread...)

Postby LOLYF » Wed Jul 06, 2011 6:51 am

Last seen spreading his bullshit on outerlimits :lol:

User avatar
Andrew1706
Hard Yaka
Posts: 716
Joined: Wed Nov 28, 2007 12:00 pm
Location: Auckland

Re: WAS fume'ing (now more of a flaming thread...)

Postby Andrew1706 » Wed Jul 06, 2011 8:13 am

Posts on IH8MUD and is widely praised for his intelligence by the yanks

User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby wopass » Wed Jul 21, 2021 10:09 am

OMG i just read some of this again...

:lol: :lol:
If you already know everything, DON'T ask bloody questions!!

User avatar
NJV6
Hard Yaka
Posts: 2745
Joined: Mon Nov 15, 2004 12:00 pm
Location: Southland
Contact:

Re: WAS fume'ing (now more of a flaming thread...)

Postby NJV6 » Sun Jul 25, 2021 8:19 pm

Oh dear that was bad. On pretty much all counts lol

P.S. the crux of it is - 12 years and has the Cruiser blown up yet? :mrgreen:
SWB V6 Paj with one or two mods ;)

Return to “Diesel Engines and Modifications”

Who is online

Users browsing this forum: No registered users and 1 guest