'87 surf wrecking, most parts available

nstg8a · Post by **nstg8a** » Sat Dec 01, 2007 9:01 pm

yuh, what it says up there...

good straight rust free panels
its a complete truck but with a blown motor
yes it has a lsd... no, you cant have it

rear springs and steering box spoken for, everything else available...

http://www.trademe.co.nz/Browse/Listing ... 99&ed=true

get me on tardme or ph/txt me on 027 3910995
or
james.stacey@turnersandgrowers.com

gimmemud · Post by **gimmemud** » Tue Dec 04, 2007 8:57 pm

whats the centre console like and does it have a heater. dont want heater but my fabrics all ripped and the rest cracked. also how about the steering shaft cover on the inside??? cheers, tim

lockie · Post by **lockie** » Wed Dec 05, 2007 4:58 am

how much for the diesel pump. is it the black top motor or the grey top an how much for the intake manifold

UBZ · Post by **UBZ** » Wed Dec 05, 2007 7:44 am

Is the front diff head available and if so what ratio is it?

Cheers Chris

86-surf · Post by **86-surf** » Wed Dec 05, 2007 9:06 am

Do you that the regulator for the rear window??, It should be tucked in behind the panel, Just behind the passenger front seat,

Thanks

nstg8a · Post by **nstg8a** » Wed Dec 05, 2007 12:37 pm

gimmemud wrote:whats the centre console like and does it have a heater. dont want heater but my fabrics all ripped and the rest cracked. also how about the steering shaft cover on the inside??? cheers, tim

console gone, will check the rest when im at work.

lockie wrote:how much for the diesel pump. is it the black top motor or the grey top an how much for the intake manifold

make an offer... will check to see if it black or grey

UBZ wrote:Is the front diff head available and if so what ratio is it?

Cheers Chris

yup, its still there, no idea what ratio tho...

86-surf wrote:Do you that the regulator for the rear window??, It should be tucked in behind the panel, Just behind the passenger front seat,

Thanks

yep, itl be there, make an offer.

86-surf · Post by **86-surf** » Wed Dec 05, 2007 12:40 pm

Not sure how much they are worth so $5??

Oh and is it working?

UBZ · Post by **UBZ** » Wed Dec 05, 2007 3:23 pm

The Trans / Axle Code is on the firewall plate

I can figure the ratio from this

gimmemud · Post by **gimmemud** » Wed Dec 05, 2007 6:16 pm

how about the gauges with the incline and angle etc on dash??

tristanp · Post by **tristanp** » Wed Dec 05, 2007 6:58 pm

is the reg still live?(on hold)

86-surf · Post by **86-surf** » Wed Dec 05, 2007 8:39 pm

oh and how much do you want for the white steelies:D?

yorick · Post by **yorick** » Wed Dec 05, 2007 10:38 pm

gimmemud wrote:how about the gauges with the incline and angle etc on dash??

Why would ya want 'em? If ya got time to look at 'em, then you either don't need them or you're lying on yer side.

And they're no good fer decoration cos they just tell the passenger that you're nowhere near as far over as it feels

They actually need two settings
1) Nervous Wife setting: where it always stays dead flat. "Gauges never lie Dear"

2) Nooby passenger setting: That always adds 15 degrees to the real incline "It's only a problem if it says 180 degrees, then we may have traction issues"

niblik · Post by **niblik** » Thu Dec 06, 2007 8:54 am

yorick wrote:They actually need two settings
1) Nervous Wife setting: where it always stays dead flat. "Gauges never lie Dear"

2) Nooby passenger setting: That always adds 15 degrees to the real incline "It's only a problem if it says 180 degrees, then we may have traction issues"

thats funny..... :lol:

shot yorick..

nstg8a · Post by **nstg8a** » Fri Dec 07, 2007 2:00 am

working on getting details requested, be patiant, im working 18hr days at the mo, so not much time to get stuff done

saturday morning is put aside for surf deconstruction

muddy_munke · Post by **muddy_munke** » Sat Dec 08, 2007 11:12 am

Do you have the front hubs?? If so how much to CHCH.
Cheers Daniel

nstg8a · Post by **nstg8a** » Sun Dec 09, 2007 9:13 am

muddy_munke wrote:Do you have the front hubs?? If so how much to CHCH.
Cheers Daniel

keeping the front hubs, after Keith pointed they were free-wheeling....

muddy_munke · Post by **muddy_munke** » Sun Dec 09, 2007 11:35 am

Na not the locking/free wheeling bit. The actual wheel bearing housing. witht he wheel studs on it.
Daniel

nstg8a · Post by **nstg8a** » Mon Dec 10, 2007 12:49 am

muddy_munke wrote:Na not the locking/free wheeling bit. The actual wheel bearing housing. witht he wheel studs on it.
Daniel

.

umm, il look into it, freight could be pricey, im betting they wont be light...

muddy_munke · Post by **muddy_munke** » Mon Dec 10, 2007 4:02 pm

OK. Don't worry about it. They were for someone else anyway. He can find his own Hubs.
Are you not doing the hub conversion in the front? Just wondering as your using the wider rear axle???
Cheers Daniel

gimmemud · Post by **gimmemud** » Mon Dec 10, 2007 8:18 pm

had a wheel bearing housing thing shipped from palmy to auckland for $40. didn't think that was too bad.

nstg8a · Post by **nstg8a** » Tue Dec 11, 2007 1:24 am

muddy_munke wrote:Are you not doing the hub conversion in the front? Just wondering as your using the wider rear axle???
Cheers Daniel

ummmmmmmm.... did i miss something?

Bubba · Post by **Bubba** » Tue Dec 11, 2007 8:01 am

gimmemud wrote:how about the gauges with the incline and angle etc on dash??

If you decide you don't want them, I will, they are great for the kids to look at, also do have a "oh shit bar" on the dash, I need one for the Cruiser

muddy_munke · Post by **muddy_munke** » Tue Dec 11, 2007 4:57 pm

The IFS Hub swap. I take it you have a beam axle Hilux or Surf? And you said earlier you were using the rear axle as it is wider. So I wondered if you were doing the IFS hub swap as this gives you a bigger offset on the front to match the wider rear....
You use the hubs from the IFS Surf. Swap them with the ones on you beam axle.

Smurf · Post by **Smurf** » Tue Dec 11, 2007 5:06 pm

muddy_munke wrote:The IFS Hub swap. I take it you have a beam axle Hilux or Surf? And you said earlier you were using the rear axle as it is wider. So I wondered if you were doing the IFS hub swap as this gives you a bigger offset on the front to match the wider rear....
You use the hubs from the IFS Surf. Swap them with the ones on you beam axle.

Nah. Nstg8a has an IFS Surf. he is using the LSD out of the rear to put in his, not the whole diff.

muddy_munke · Post by **muddy_munke** » Tue Dec 11, 2007 5:46 pm

AH, I'll crawl back to my cave now. I thought he was using the widerrear axle housing. HA
My Bad

ransom · Post by **ransom** » Tue Dec 11, 2007 6:29 pm

diffs are 4.3 std turbo surf code on firewall is g285
i sold this to nstg8a as i wasnt allowed any more wrecks where i live
in pretty good nick for a 20 yr old 4wd hope this helps

nstg8a · Post by **nstg8a** » Wed Dec 12, 2007 1:45 am

ransom wrote:
in pretty good nick for a 20 yr old 4wd hope this helps

damn right, took a lot of umming and ahhing before i decided to pull it to bits... very nearly put my engine in instead...

'87 surf wrecking, most parts available

'87 surf wrecking, most parts available

axle codes

Re: axle codes