bad starting and stalling

For all Mitsubisih related topics

Post Reply
User avatar
pajeroboy
Hard Yaka
Posts: 195
Joined: Tue Nov 08, 2005 12:00 pm
Location: Christchurch

bad starting and stalling

Post by pajeroboy »

well here the situation,was out and bout few days ago,was sitting beside river looking at where to cross it,and pajero stalled,(wasnt in it at time),got it going finished playing around went home,now pajero doesnt want to start very well,glow it, turn key starter works great just wont fire,glows all good,bat all good,does start after pumping loud pedal couple of times but then wont idle,will idle if choke or loud pedal used.

what would be the cause of this?
was thinking fuel pump maybe

2.5 td 4d56t if that any help :?
33" muddies, 50mm body lift, ball joint flip, quick release front sway bar,40mm lifted rear dobi springs and new shocks,custom sill body armor,custom front bar.

SAM
User avatar
dblancer
Driver/Navigator
Posts: 27
Joined: Mon Jul 30, 2007 12:00 pm

Re: bad starting and stalling

Post by dblancer »

From my limited knowledge of the subject

I have a 2.8 TD 4M40T but the theory is the same.

I had random stalling, very difficult starting without having the pump the accerator thru the floor!
Worst thing is it was getting much much worse week by week.
And as you say the idling was bad, had to keep my foot on the peddle to keep it from dying
I also had huge plumes of smoke when the idle was bad...

Sadly it cost me 1700 bucks for a complete fuel pump recondition
I tried all other options, anything to get around the issue...
User avatar
red-devil
Hard Yaka
Posts: 987
Joined: Mon May 01, 2006 12:00 pm
Location: Christchurch
Contact:

Re: bad starting and stalling

Post by red-devil »

Sam two things.

Air lecking into system.
Fuel pump.

Been there and my fix was installing a lift pump so my filter was positive pressure while running.

Check the fuel rails around the injectors my have a crack somewere.

jono
User avatar
pajeroboy
Hard Yaka
Posts: 195
Joined: Tue Nov 08, 2005 12:00 pm
Location: Christchurch

Re: bad starting and stalling

Post by pajeroboy »

ok thanks jono,hows the new baby? well i had a little looky at the truck today,there is a little tiny bit of wetness around the number 4 injector,(one closest to fire wall) on the fuel railish,would that be the cause of it? how and where did u get the lift pump from and fit it jono?
33" muddies, 50mm body lift, ball joint flip, quick release front sway bar,40mm lifted rear dobi springs and new shocks,custom sill body armor,custom front bar.

SAM
Post Reply

Return to “Mitsubishi”