waimac sat 19th

COMILUX · Post by **COMILUX** » Fri Jan 18, 2008 4:18 pm

Hey, going to go out tomorow arvo and check out the 4wd park at the waimac that a few members went to last weekend - rained today so hopefully wont be so dusty and may be a little mud

..... but wont get hopes up.
Meet at belfast pub at 12.30pm if anyones keen post up or ill see you there.
contact me on my cell below if you need to.

Nick

Jezza · Post by **Jezza** » Fri Jan 18, 2008 4:39 pm

I wouldn't mind going, I haven't done any 4wding in awhile

. I'll see how my morning goes

red-devil · Post by **red-devil** » Fri Jan 18, 2008 4:50 pm

NNOoooooooooooo

i wont have the wheel nut tight by then :cry:

I need a 54 mm socket to nip them up. well i should get started on fitting diff first.

Jono

COMILUX · Post by **COMILUX** » Fri Jan 18, 2008 5:20 pm

Jezza wrote:I wouldn't mind going, I haven't done any 4wding in awhile . I'll see how my morning goes

No probs mite see you there

COMILUX · Post by **COMILUX** » Fri Jan 18, 2008 5:22 pm

red-devil wrote:NNOoooooooooooo

i wont have the wheel nut tight by then

I need a 54 mm socket to nip them up. well i should get started on fitting diff first.

Jono

you dont have much luck geting out do you.
54mm socket! thats rather large, bigest i have is a 42

hosehustler · Post by **hosehustler** » Fri Jan 18, 2008 5:55 pm

Just do what the rest of us out there do who don't own a 54mm socket........thats 99.9% of us :lol:

use a drift and a hammer....preferably a brass drift, but after a few removals you won't care what sort of drift it is as long as it loosens the burred nut :wink:

may come out for a play myself :mrgreen:

red-devil · Post by **red-devil** » Fri Jan 18, 2008 6:44 pm

i know that trick but i dont like bashin my family truck that is meant to be reliable.

ill try. Arrrr so close

Elmo · Post by **Elmo** » Fri Jan 18, 2008 6:55 pm

Im pretty sure we have 1 at work (we should, its just a matter of finding it) so if you need one, sing out and I'll borrow it and swing by. I'll be at work tomorrow at some point, so text me. 021 569 467

As for the waimak. I'll see how I get on with my wof etc.

Im keen for a night play! ;-)

rangimotors · Post by **rangimotors** » Fri Jan 18, 2008 7:19 pm

shall i bring the shit box? or do ya have room for me?

hosehustler · Post by **hosehustler** » Fri Jan 18, 2008 7:25 pm

red-devil wrote:i know that trick but i dont like bashin my family truck that is meant to be reliable.

ill try. Arrrr so close

It won't effect reliability, hell there is 2 lock nuts b4 you get to the bearing, I and many others have been dong it that way for many years....... :mrgreen:

i've had shit loads of parts let me down over the years I wish it had been something as simple as a lock nut making the truck unreliable :lol:

tallsam66 · Post by **tallsam66** » Fri Jan 18, 2008 7:45 pm

Ill most likely be there.
Going to straighten out by tow bar then put it back on & see how it looks.

rokhound · Post by **rokhound** » Fri Jan 18, 2008 7:53 pm

hosehustler wrote:It won't effect reliability, hell there is 2 lock nuts b4 you get to the bearing, I and many others have been dong it that way for many years....... i've had shit loads of parts let me down over the years I wish it had been something as simple as a lock nut making the truck unreliable

Fawk yeah! What he said^^^^.

Tapping your bearing nuts up with a drift/screwdriver and hammer may not seem real professional, but it works fine. If you are really precious about that sort of thing, best you pay a professional to do the job.

COMILUX · Post by **COMILUX** » Fri Jan 18, 2008 10:28 pm

rangimotors wrote:shall i bring the shit box? or do ya have room for me?

il have room for you mate but if ya wana bring it down for a play go for it

red-devil · Post by **red-devil** » Fri Jan 18, 2008 11:22 pm

ok boys i'll tap her home ,
been a rough night so far with little one. :cry:

will be out early to gett it all done.

Jezza · Post by **Jezza** » Sat Jan 19, 2008 8:51 am

where do we meet?

tallsam66 · Post by **tallsam66** » Sat Jan 19, 2008 10:32 am

Jezza wrote:where do we meet?

1230 Belfast Pub.

Ill be there

COMILUX · Post by **COMILUX** » Sat Jan 19, 2008 10:41 am

belfast pub on main north road, no the one? the one that seems to be the normal meeting place for ore members

Taz · Post by **Taz** » Sat Jan 19, 2008 10:46 am

I might be keen for a gander out there tomorrow, bit busy today though.

Elmo · Post by **Elmo** » Sat Jan 19, 2008 8:02 pm

Sorry i didnt make it, Kiwipete conned me into helping hi do his body lift.

I wanted to!

Tomorrow? hehehe

red-devil · Post by **red-devil** » Sat Jan 19, 2008 9:13 pm

sorry boys i had a few problems getting the diff head in , only took 3 hours just for the head.
only have to fill the diff and put on the left tyre, then road test .

any pics

truck-fixer · Post by **truck-fixer** » Sun Jan 20, 2008 7:26 am

Was a good day out. Thanks to all that went.

red-devil wrote:sorry boys i had a few problems getting the diff head in , only took 3 hours just for the head.
only have to fill the diff and put on the left tyre, then road test .

any pics

Yeh I got a few pics. Will post them up as soon as the albums are online again.

tallsam66 · Post by **tallsam66** » Sun Jan 20, 2008 7:43 am

Ive got some pics too & will post when the pics are back.

COMILUX · Post by **COMILUX** » Sun Jan 20, 2008 9:17 am

was a gread day thanks guys, truckfixer and lil miss zuki took us through some interesting tracks on the south side later in the day, cant wait till they are filled with mud and go through again. looking forward to seeing he photos when they can be posted.

yeti · Post by **yeti** » Sun Jan 20, 2008 4:51 pm

went over today and had a play.... bring on the rain!!!!!!! some of those tracks will be fun... :lol:

waimac sat 19th

waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th

Re: waimac sat 19th