Rallywoods Working Bee 3 : 16th/17th Feb

Planning a trip and want others to join? Then post the details in here. Don't forget contact details, dates and difficulty level.

Post Reply
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Sadam_Husain »

Awesome weekend guys, I never knew my flatdeck was a tipper, just going to have to work on getting the firewood a bit closer to the woodshed next time :wink:

A fun couple of days getting around the tracks, certianly a bit more slippery with a bit of recent rain :shock:
Roll on the next weekend :mrgreen:
User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by haynzy »

The next working weekend is pencilled in for the 1/2 March and is likely to be pouring concrete and doing up the frames and stuff so will be a bit more driving, there may be half a dozen fence posts going in ... will advise as soon as I hear its going ahead and there is a digger up there which will clear the new area's properly and dig the post holes. this date may change etc[/quote]

I will endevor to make this one if my truck is still not goin I will bring the van down laden with beer, whoops I meant tools :lol:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

I will endevor to make this one if my truck is still not goin I will bring the van down laden with beer, whoops I meant tools


It won't be enough...that will only last 30 seconds :shock:

If you need a truck just borrow Curly's Hilux ..... everyone else does :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by haynzy »

I hope to be mobile by then anyway so be a good way to suss out these new tracks before I go in there with the cd club at easter, And make a cameo apperance on behalf of the cd club too will get in touch closer to the time, might be able to scam some materials off my clients :wink:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Sadam_Husain »

haynzy wrote: I will endevor to make this one if my truck is still not goin I will bring the van down laden with beer, whoops I meant tools :lol:


Pauls still talking to the other rallywoods shareholders to get the funding approved to rebuild the back of the hut but he seems to be determined to go ahead with it all anyway hence the part demolition and excavation etc we've already done.... Oh yeah and he wants to get a truck up there to pour the 4-6 metres of concrete so we'll just be placeing it not mixing it 8) 8)
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

I think Saddam is more concerned what particular colour the 12 dozen beer is that you are bringing us........ I think Tui, Export and Ice are safe to bring :lol:

I'll be getting a list of materials that we need and will be seeing what can be donated or got trade etc, the cheaper it is the more funds we have for eg extending the gazebo etc and the other projects in mind
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by abbo »

i can get hold of the gear to lay the floor :D Its all the floats like bull float amd wooden ones if that helps :wink:
Don't have 4wd.
User avatar
haynzy
Hard Yaka
Posts: 1144
Joined: Thu Jul 13, 2006 12:00 pm
Location: Palmy North

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by haynzy »

abbo wrote:i can get hold of the gear to lay the floor :D Its all the floats like bull float amd wooden ones if that helps :wink:

I have screeds bullfloats vibrator :shock: and barrows and other shit needed for pouring floors so should have all the kit, oh and a laser level so curly wont lose his balance after too many lagers :lol:
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

and a laser level so curly wont lose his balance after too many lagers


Its all those Steinlagers and Rhinecks he was drinking :roll:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by abbo »

haynzy thats sounds like what we need to do the job :wink: :twisted:
Don't have 4wd.
User avatar
Beer_Cruiser
Hard Yaka
Posts: 859
Joined: Tue Jun 05, 2007 12:00 pm
Location: now in B O P

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Beer_Cruiser »

User avatar
Cloggy_NZ
Texas Chainsaw
Posts: 663
Joined: Wed Aug 24, 2005 12:00 pm
Location: Wainuiomata

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Cloggy_NZ »

Beer_Cruiser wrote:Heres a link to a vid of the caboose relocation

http://malanddeb.myphotoalbum.com/view_photo.php?set_albumName=album09&id=Rallywoods_16_Feb08_003

Shit that looks funny :lol: Trucks getting progressivly more crossed up the closer they were to the caboose.
That was fun though eh? Nothing like brute force and ignorance to get the job done.
1992 Land Rover Discovery V8i, 5 speed, 12000lbs winch, Salisbury rear, 110 front, 65mm spring lift, dents in every panel, Rallywoods pinstriping.
Image
User avatar
Beer_Cruiser
Hard Yaka
Posts: 859
Joined: Tue Jun 05, 2007 12:00 pm
Location: now in B O P

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Beer_Cruiser »

Hows all those photos going Reese?
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

hmmmm 16 wheel drive...

so with a 4.2 diesel, a 350 chev, a 3f and another 4.2 how much horsepower/torque were they pulling???, assuming as well 3 tons per tow vehicle what was the power to weight??? :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

Beer_Cruiser wrote:Heres a link to a vid of the caboose relocation

http://malanddeb.myphotoalbum.com/view_photo.php?set_albumName=album09&id=Rallywoods_16_Feb08_003


pity theres no sound but still an awesome vid.....
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
dazza85
Hard Yaka
Posts: 938
Joined: Tue Jan 03, 2006 12:00 pm
Location: Hastings

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by dazza85 »

Beer_Cruiser wrote:Heres a link to a vid of the caboose relocation

http://malanddeb.myphotoalbum.com/view_photo.php?set_albumName=album09&id=Rallywoods_16_Feb08_003


That looks like it was fun !! Where did you move them to ??
There is no mechanical problem so difficult that it cannot be solved by brute strength and ignorance.
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by SV1K »

Sadam_Husain wrote: I never knew my flatdeck was a tipper, just going to have to work on getting the firewood a bit closer to the woodshed next time :wink:


I like the side tipper Sadam.....

Image

The rest of the photo's and vids are here..... Note the vids are not that big.. if you want the big ones let me know.. there is one that is 46.3MB :shock:

http://s248.photobucket.com/albums/gg163/suzuki1k/

Enjoy them.... 8) 8)
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by SV1K »

dazza85 wrote:That looks like it was fun !! Where did you move them to ??


They were moved to the left hand side of the track towards the hut, just before the left turn to go up to the air strip... 8) 8)
They were heavy too! :shock: :shock:
jumper
Hard Yaka
Posts: 265
Joined: Sun Feb 06, 2005 12:00 pm
Location: Wellington

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by jumper »

I had a great time as the truck didn't brake anything major until the after party at Aotea :) :?
Rev counter mount snapped, horn mount snapped, speaker fell out of door, broke small door window.
Then at Aotea the left engine mount snapped :roll:
i am missing a green spade and a pick axe.
microwaved cheese on toast
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

jumper wrote:I had a great time as the truck didn't brake anything major until the after party at Aotea :) :?
Rev counter mount snapped, horn mount snapped, speaker fell out of door, broke small door window.
Then at Aotea the left engine mount snapped :roll:
i am missing a green spade and a pick axe.


so the little red zuk hurt the 40 more than we thought.... :lol: :lol:
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
mroffroader
Hard Yaka
Posts: 2330
Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by mroffroader »

Were are all the photos????
80 series tow bus towing a redneck ass vitara :D
User avatar
86-surf
Hard Yaka
Posts: 893
Joined: Fri Nov 02, 2007 12:00 pm
Location: Rotorua

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by 86-surf »

In the cameras where els!!,,


Why aint they uploaded yet!
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

mroffroader wrote:Were are all the photos????

check da link...lol
suzuki1k wrote:
Sadam_Husain wrote: I never knew my flatdeck was a tipper, just going to have to work on getting the firewood a bit closer to the woodshed next time :wink:


I like the side tipper Sadam.....

Image

The rest of the photo's and vids are here..... Note the vids are not that big.. if you want the big ones let me know.. there is one that is 46.3MB :shock:

http://s248.photobucket.com/albums/gg163/suzuki1k/

Enjoy them.... 8) 8)
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by SV1K »

suzuki1k wrote:
Sadam_Husain wrote: I never knew my flatdeck was a tipper, just going to have to work on getting the firewood a bit closer to the woodshed next time :wink:


I like the side tipper Sadam.....

Image

The rest of the photo's and vids are here..... Note the vids are not that big.. if you want the big ones let me know.. there is one that is 46.3MB :shock:

http://s248.photobucket.com/albums/gg163/suzuki1k/

Enjoy them.... 8) 8)


mroffroader wrote:Were are all the photos????




And you wonder why we make smart comments to you .... :lol: :lol: :lol: :lol: :lol: :lol:
User avatar
curly12
Hard Yaka
Posts: 1335
Joined: Fri Mar 02, 2007 12:00 pm
Location: Whangarei or there abouts!!

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by curly12 »

Anyone happen to find a stray strop and blue tarp in their wagon?? Am missing mine.
User avatar
mroffroader
Hard Yaka
Posts: 2330
Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by mroffroader »

suzuki1k wrote:
suzuki1k wrote:
Sadam_Husain wrote: I never knew my flatdeck was a tipper, just going to have to work on getting the firewood a bit closer to the woodshed next time :wink:


I like the side tipper Sadam.....

Image

The rest of the photo's and vids are here..... Note the vids are not that big.. if you want the big ones let me know.. there is one that is 46.3MB :shock:

http://s248.photobucket.com/albums/gg163/suzuki1k/

Enjoy them.... 8) 8)


mroffroader wrote:Were are all the photos????




And you wonder why we make smart comments to you .... :lol: :lol: :lol: :lol: :lol: :lol:


No I don't.....I have seen those.....there was alot more people than just you with cameras!!!!!!
80 series tow bus towing a redneck ass vitara :D
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by SV1K »

curly12 wrote:Anyone happen to find a stray strop and blue tarp in their wagon?? Am missing mine.


Yep I got that Curly, will bring it next time. 8) 8)
User avatar
curly12
Hard Yaka
Posts: 1335
Joined: Fri Mar 02, 2007 12:00 pm
Location: Whangarei or there abouts!!

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by curly12 »

Sweet as :D
User avatar
TopGear
Bush Crasher
Posts: 57
Joined: Wed Jul 18, 2007 12:00 pm
Location: Okato, The Naki

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by TopGear »

whos got all the strops then..beer_cruiser is missing his faded blue snatch master one too!
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

I got one thrown into the back of mine as lost property...... :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
Post Reply

Return to “Planning a trip?”