The next working weekend is pencilled in for the 1/2 March and is likely to be pouring concrete and doing up the frames and stuff so will be a bit more driving, there may be half a dozen fence posts going in ... will advise as soon as I hear its going ahead and there is a digger up there which will clear the new area's properly and dig the post holes. this date may change etc[/quote]
I will endevor to make this one if my truck is still not goin I will bring the van down laden with beer, whoops I meant tools
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
I hope to be mobile by then anyway so be a good way to suss out these new tracks before I go in there with the cd club at easter, And make a cameo apperance on behalf of the cd club too will get in touch closer to the time, might be able to scam some materials off my clients
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
haynzy wrote: I will endevor to make this one if my truck is still not goin I will bring the van down laden with beer, whoops I meant tools
Pauls still talking to the other rallywoods shareholders to get the funding approved to rebuild the back of the hut but he seems to be determined to go ahead with it all anyway hence the part demolition and excavation etc we've already done.... Oh yeah and he wants to get a truck up there to pour the 4-6 metres of concrete so we'll just be placeing it not mixing it
I think Saddam is more concerned what particular colour the 12 dozen beer is that you are bringing us........ I think Tui, Export and Ice are safe to bring
I'll be getting a list of materials that we need and will be seeing what can be donated or got trade etc, the cheaper it is the more funds we have for eg extending the gazebo etc and the other projects in mind
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
abbo wrote:i can get hold of the gear to lay the floor Its all the floats like bull float amd wooden ones if that helps
I have screeds bullfloats vibrator and barrows and other shit needed for pouring floors so should have all the kit, oh and a laser level so curly wont lose his balance after too many lagers
swb lux with 7mge, trailgear crossover, trailgear rear lift kit, custom front bar, runva 1200lb winch, custom snorkel, 37" Mtrs, custom deck, lockright in the rear.
Shit that looks funny Trucks getting progressivly more crossed up the closer they were to the caboose. That was fun though eh? Nothing like brute force and ignorance to get the job done.
1992 Land Rover Discovery V8i, 5 speed, 12000lbs winch, Salisbury rear, 110 front, 65mm spring lift, dents in every panel, Rallywoods pinstriping.
so with a 4.2 diesel, a 350 chev, a 3f and another 4.2 how much horsepower/torque were they pulling???, assuming as well 3 tons per tow vehicle what was the power to weight???
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
I had a great time as the truck didn't brake anything major until the after party at Aotea Rev counter mount snapped, horn mount snapped, speaker fell out of door, broke small door window. Then at Aotea the left engine mount snapped i am missing a green spade and a pick axe.
jumper wrote:I had a great time as the truck didn't brake anything major until the after party at Aotea Rev counter mount snapped, horn mount snapped, speaker fell out of door, broke small door window. Then at Aotea the left engine mount snapped i am missing a green spade and a pick axe.
so the little red zuk hurt the 40 more than we thought....
truckless and shall remain so till she who wears the pants says otherwise.................lol