RALLYWOODS PARTS WANTED

[Jerry]

Ok here is the list of stuff we need for Rallywoods, has anyone got trade accounts ?, what we save we can reuse for more work up there ie extending the Gazebo, more bunk space. will need handy/trades people. with the concrete etc does anyone have access to a large mixer and stuff.

Perhaps you have some of this stuff lying round in your shed/garage that you wish to donate? perhaps a company you work for/own etc would like to donate or donate part and suppy the rest at a trade price. 2nd hand stuff may be ok for most stuff.

Tools might be useful....concrete barrows, nail guns, saws, maybe a generator?, anyone got access to a digger/dozer we can get our sticky hands on???

There will be a "sponsor" wall, etc.......

Please contact me via PM or cell 027 479 2417

Corrugated Iron (Roof) 3.6M x 17sheets = 61.2M 61.2
Corrugated Iron (Rear Wall) 2.4M x 17sheets = 40.8M 40.8
Flashings 4M x 2 = 8M 8
Roof nails 60mm
Wall nails 30mm galv flat head
Framing nails 100mm flat head
4x2 Framing Timber Number 2 grade 400M 400
6x2 Timber 3.6M x 15 = 54M 54
Building Paper 100M2 100
Malfoud 30M 30
External wall cladding 5 sheets 2400x1200x10 tantalised plywood 5
Internal Wall Cladding 20 sheets 2400x1200x10 internal plywood 20
Doors Internal and External (second hand)?
Concrete 12.5M x 3M x 0.1M = 3.75m3 + footings = 4.5M3 4.5
Reinforcing Rods 10mm deformed 5 lengths 5
Electrical (any second hand switches light fittings and cable)
Plumbing
LPG Gas Kelly font 1
Shower x 2 (second hand)? 2
Toilet x 2 (second hand)? 2
Sewer pipe / fittings
Drain pipe / fittings
Water pipe / fittings

[Jerry]

Hi jerry
When I come down for the workin bee I will bring more power tools than tim the toolman could ever dream of plus I have all the nails and fixings you will need some dpc (malthoid) an interior door and should be able to rustle a few elec fittings
Will bring concrete gear as well Give me a holah if there is anything else

Just got this from haynzy good on ya....hope theres still room left for Beer you could always tie BudNuz to the roof if you needed more beer space

[badnuz]

Hi jerry
When I come down for the workin bee I will bring more power tools than tim the toolman could ever dream of plus I have all the nails and fixings you will need some dpc (malthoid) an interior door and should be able to rustle a few elec fittings
Will bring concrete gear as well Give me a holah if there is anything else

Just got this from haynzy good on ya....hope theres still room left for Beer you could always tie BudNuz to the roof if you needed more beer space

thats BADNUZ thanks jerry! struth! i would ride on the roof if it means i can attend ( hows that for dedication!)
BADNUZ

[Jerry]

Sorry there Badnooz, must have been a typo error

[mroffroader]

I have a concrete mixer sitting here but no way to bring it up.......

Edit....also have a generator

[Jerry]

How big is it?

[SV1K]

I have a concrete mixer sitting here but no way to bring it up.......

Edit....also have a generator

Will it fit on a 6x4 trailer?

[mroffroader]

Yea they both will......

[Jerry]

may be getting a concrete truck up there loaded with it ready to pour, may be easier to work with and stronger...., generator will be handy....

[badnuz]

so the concrete truck is booked for the 4/5 april dates? will endevour to attend then!

[Sadam_Husain]

...., generator will be handy....

That old Lister in the shed up there should be putting out around 5kva..... it should be plenty to run whatever we need?

[Jerry]

TBA, they only deliver weekdays and sat morning, so it might be a grab a few people monday morning.....am still researching.....maybe someone here is in that industry and can help......plan be is if we have enough people to mix and lay it ourselves.....any idea's

If the lister breaks down then we need a backup....I don't think repco have parts on the shelf for it....

[yorick]

If the lister breaks down then we need a backup...

Excuse me, Listers don't break down, they just hibernate until someone can apply the requisite massage with a ten pound Sledgehammer.

[Jerry]

Or in the case last time it ran out of diesel and we had to syphon some out of a truck

For those wondering what a Lister is

http://www.kk.org/cooltools/archives/001011.php

[yorick]

Please contact me via PM or cell 027 479 2417

Corrugated Iron (Roof) 3.6M x 17sheets = 61.2M 61.2
Corrugated Iron (Rear Wall) 2.4M x 17sheets = 40.8M 40.8 4 sheets various lengths all over 3 metres
Flashings 4M x 2 = 8M 8
Roof nails 60mm
Wall nails 30mm galv flat head
Framing nails 100mm flat head
4x2 Framing Timber Number 2 grade 400M 400
6x2 Timber 3.6M x 15 = 54M 54
Building Paper 100M2 100
Malfoud 30M 30
External wall cladding 5 sheets 2400x1200x10 tantalised plywood 5
Internal Wall Cladding 20 sheets 2400x1200x10 internal plywood 20

I'll check with the Pinex Plywood mill at Kinleith, seconds are often available.

Reinforcing Rods 10mm deformed 5 lengths 5
What about mesh for the floor, I've got a fair amount of that

Electrical (any second hand switches light fittings and cable)
Distribution Board?

Plumbing

Shower x 2 (second hand)? 2
Remodelling Bathroom, shower tray and plumbing is still good. Lining is rubbish, so may need some seratone type panels

Sewer pipe / fittings about 6 metres of 100 mm sewer pipe, non flanged
Drain pipe / fittings 2x 3 metre lengths of 3" PVC Downpipe
Water pipe / fittings 18 metres of 25mm PVC pressure pipe: Internal.

Various other from two rolls of 32mm Alkathene (50 metre I think) some 20mm plus various fittings

[yorick]

Or in the case last time it ran out of diesel and we had to syphon some out of a truck

For those wondering what a Lister is

http://www.kk.org/cooltools/archives/001011.php

Aaawww that's just beautiful, almost as cool as a Blackstone!

[Jerry]

Will get back to you Yorick re these bits.....

One of the jobs to do if we get time is to tidy up the lister shed, clean it out, redo the fuel tank, fuel line, was reading that you can put car mufflers on them to make them quieter, maybe we can do this if people have any suitable pipe lying round and stuff, and a welder up there.