Cruiser Studs and 15x8" Whitespoke Mangle wanted

Selling, info, or parts wanted. Anything about parts goes in here.
Post Reply
User avatar
fweddy
Hard Yaka
Posts: 1062
Joined: Fri Oct 13, 2006 12:00 pm
Location: North Canterbury

Cruiser Studs and 15x8" Whitespoke Mangle wanted

Post by fweddy »

Needing 1x 8" white spoke (pref Mangle but consider anything.)

Have ruined one of mine by slogging out the stud holes! :(

Will also consider with 33" MT tyre with good tread

Also need one stud (snapped one of my front studs) any one got a vehicle they are wrecking or a spare hub with studs they can knock one out for me?

1985 BJ73 70 Series Cruiser
Last edited by fweddy on Fri Apr 04, 2008 2:49 pm, edited 1 time in total.
Sold my 1985, BJ74 MWB Landcruiser, rear locker, 33" MTs, snorkel, PTO winch, solid bars all round, spotties, AM CB etc.
Now just a 1994, 1kz Surf, pretty standard.
User avatar
fweddy
Hard Yaka
Posts: 1062
Joined: Fri Oct 13, 2006 12:00 pm
Location: North Canterbury

Re: Studs and 15x8" Whitespoke Mangle wanted

Post by fweddy »

Looks like I have located a rim (thanks for the PM) but still open to options till I confirm its going to fit.

Now still needing two studs - one snapped one bent.
Image

Truck is not mobile at the mo as I've pulled them out - appreciate any help while I track them down.
Sold my 1985, BJ74 MWB Landcruiser, rear locker, 33" MTs, snorkel, PTO winch, solid bars all round, spotties, AM CB etc.
Now just a 1994, 1kz Surf, pretty standard.
User avatar
WACKO
Pyro
Posts: 990
Joined: Sat Feb 11, 2006 12:00 pm
Location: Lower Hutt

Re: Cruiser Studs and 15x8" Whitespoke Mangle wanted

Post by WACKO »

have you tried ripco and BNT etc? they arnt that expensive. also try TWL i think.

Sam
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: Cruiser Studs and 15x8" Whitespoke Mangle wanted

Post by MNC »

Mate they are only $7 for genuine Toyota studs. After market are actually more more expensive :shock:
Image
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: Cruiser Studs and 15x8" Whitespoke Mangle wanted

Post by wopass »

MNC wrote:Mate they are only $7 for genuine Toyota studs. After market are actually more more expensive :shock:


and replace all of the affected side as you would have stressed the rest of them and they will probably fail on you soon. :wink:
If you already know everything, DON'T ask bloody questions!!
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: Cruiser Studs and 15x8" Whitespoke Mangle wanted

Post by wopass »

ohh and as for the rim, go buy a new one, they are only like 60 bucks brand new :wink:
If you already know everything, DON'T ask bloody questions!!
Post Reply

Return to “4WD Parts”