project roadkill!!(nearly finished,yeah right!!)

[Ryan]

fitted locker, bearings and new brakes tonight....just got to get my drums tommorow from the machine shop and bleed the brakes, then rear end ready for play

[Ryan]

time for an update.....since the last update i have blown my motor so its been at the mechanics for a week or so and i got it home tonight with a new motor, its a g16b block from a cultas with the head, injection and loom etc from a g16a from a vitara and it runs smooth as
now all i need to do is: get a surge tank, fit new pumps(i have a low pressure one just need a high pressure one)wire in a thermo switch for new electric fan. make new bonnet catch as i had to cut old one out to mount new radiator from an old datsun with honda fan mounted to it and remake snorkle and air box etc

[coxsy]

so all you have to do is everything?

[Ryan]

made the new air intake for the injection today.....may look a bit hory but i didnt wana cut my snorkle again



gutted photobucket cuts the pictures

[moonhopper]

hey Ryan looks bloody good to me, did the dizzy come standard like that, as the 413 leans the other way its a bit tall for my bonnet .i need one that leans the same way as the one in your pic, cheers

[Ryan]

dizzy is from the vitara that i got the injection,loom,cam etc from

[moonhopper]

does it bolt to the same mounts as the 413? as in the 1300 motor

[turoa]

its not photobucket that cuts the pics, its the new forum. to view the full size right click and click view image.

[Ryan]

does it bolt to the same mounts as the 413?

i dont know? but probly not as its the 1600 with the 16valve head.....