1991 Suzuki Samurai - SOLD LWB body still avaliable

Selling or wanted vehicles.
Post Reply
User avatar
icekayak
Hard Yaka
Posts: 629
Joined: Wed Sep 06, 2006 12:00 pm
Location: North Auckland

1991 Suzuki Samurai - SOLD LWB body still avaliable

Post by icekayak »

The Samurai has been sold and picked up this morning :)

Still avaliable:

2" (ish) HD maxitrack lifted springs f+r as new only fitted to the truck never used.
Aftermarket 4x4 SPOA kit

SJ413 parts truck - went swimming in salt water overnight (bit of rust) - no diffs, windscreen, or transfer (transfer avaliable for extra) but has toyota ?3k engine and box de-reg but has cert plate for mods. think clutch is stuck from memory (cheap)

LWB SJ413 project truck (definately a project) , 6pt cage, canopy etc etc (cheap for just body/chassis alone)
Depending on price 1300 motor/box/transfer - possibly diffs

Sj413 SWB chassis with rego on hold (would prefer to sell chassis/lwb/parts truck together - cheap)

Need the trucks gone :)
Last edited by icekayak on Thu May 01, 2008 3:04 pm, edited 1 time in total.
User avatar
UBZ
Hard Yaka
Posts: 1647
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: 1991 Suzuki Samurai Convertable (Cutdown) WideTrack!!

Post by UBZ »

icekayak wrote:Also have the gears needed from a 410/413 ready for machining for the rockhopper transfer case (machining NOT done yet)


How much are you after for the gears?
LR110 ..... LJ50 project :roll:
Chris.
User avatar
Ryan
Hard Yaka
Posts: 1187
Joined: Thu Aug 03, 2006 12:00 pm
Location: kapiti

Re: 1991 Suzuki Samurai Convertable (Cutdown) WideTrack!!

Post by Ryan »

i probably cant afford them but how much for the maxitrack lifted springs?
94 nissan terrano 2inch susp lift, 3inch body lift, 33x12.5x15 maxxis bighorns
User avatar
icekayak
Hard Yaka
Posts: 629
Joined: Wed Sep 06, 2006 12:00 pm
Location: North Auckland

Re: 1991 Suzuki Samurai Convertable (Cutdown) WideTrack!!

Post by icekayak »

UBZ wrote:
icekayak wrote:Also have the gears needed from a 410/413 ready for machining for the rockhopper transfer case (machining NOT done yet)


How much are you after for the gears?


What transfer case do you have? just the stock SJ413 one? ie so you'd need the SJ410 gears?
User avatar
icekayak
Hard Yaka
Posts: 629
Joined: Wed Sep 06, 2006 12:00 pm
Location: North Auckland

Re: 1991 Suzuki Samurai Convertable (Cutdown) WideTrack!!

Post by icekayak »

Ryan wrote:i probably cant afford them but how much for the maxitrack lifted springs?


Not too sure... and can't remember what i paid for them. Mudbits wants like $445 a set for them so make an offer less than that :) They have been fitted but never actually driven on (was on project vehicle)

Will have to check to see how many are still floating around but i did have a set of new aftermarket bushes there too somewhere... which would have worked well with them...
User avatar
UBZ
Hard Yaka
Posts: 1647
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Re: 1991 Suzuki Samurai Convertable (Cutdown) WideTrack!!

Post by UBZ »

icekayak wrote:
UBZ wrote:
icekayak wrote:Also have the gears needed from a 410/413 ready for machining for the rockhopper transfer case (machining NOT done yet)


How much are you after for the gears?


What transfer case do you have? just the stock SJ413 one? ie so you'd need the SJ410 gears?


Yes all Im after is the 84 410 gears ,I all ready have a 85 413 transfer.
LR110 ..... LJ50 project :roll:
Chris.
User avatar
new2zukes
Hard Yaka
Posts: 761
Joined: Thu Sep 06, 2007 12:00 pm
Location: kerikeri northland

Re: 1991 Suzuki Samurai Convertable (Cutdown) WideTrack!!

Post by new2zukes »

hi im realy interested in the sammy i have pmed you thanks.
User avatar
icekayak
Hard Yaka
Posts: 629
Joined: Wed Sep 06, 2006 12:00 pm
Location: North Auckland

Re: 1991 Suzuki Samurai - SOLD LWB body still avaliable

Post by icekayak »

The Samurai has been sold and picked up this morning

Still avaliable:

2" (ish) HD maxitrack lifted springs f+r as new only fitted to the truck never used.
Aftermarket 4x4 SPOA kit

SJ413 parts truck - went swimming in salt water overnight (bit of rust) - no diffs, windscreen, or transfer (transfer avaliable for extra) but has toyota ?3k engine and box de-reg but has cert plate for mods. think clutch is stuck from memory (cheap)

LWB SJ413 project truck (definately a project) , 6pt cage, canopy etc etc (cheap for just body/chassis alone)
Depending on price 1300 motor/box/transfer - possibly diffs

Sj413 SWB chassis with rego on hold (would prefer to sell chassis/lwb/parts truck together - cheap)

Need the trucks gone :D
Post Reply

Return to “4WD's Forsale / Wanted”