Ball Joint Flip

red-devil · Post by **red-devil** » Fri May 05, 2006 5:23 pm

Does any one have/ Can make the spacer that is need for the ball joint flip.

Cheers Jono

WACKO · Post by **WACKO** » Fri May 05, 2006 8:39 pm

you dont NEED the spacer, you know that aye?

WACKO · Post by **WACKO** » Fri May 05, 2006 8:46 pm

http://www.offroadexpress.co.nz/modules ... pic&t=1476

red-devil · Post by **red-devil** » Sat May 06, 2006 11:02 am

opps sorry no i didnt :oops:

Ilike the idea of 10mm blots so thanks

jono

red-devil · Post by **red-devil** » Sat May 06, 2006 6:26 pm

Cheers for the info, Flip all done in 2 hours this avo

Jono

WACKO · Post by **WACKO** » Sat May 06, 2006 6:29 pm

easy as aye? you do the 10mm bolts at the same time?

red-devil · Post by **red-devil** » Sat May 06, 2006 6:36 pm

Yes after looking at it and thinking need bigger bolts.

im thinking about finding some spacers ( 10- 15 mm ) to gain a little more space for the upper bump stops.

or just trim the bump stops down a little

Jono

WACKO · Post by **WACKO** » Sat May 06, 2006 6:40 pm

i just trimmed mine. everyone else seemed to do it so figured it cant be all that bad... what sort of paj have you got?

red-devil · Post by **red-devil** » Sat May 06, 2006 6:55 pm

91 soft top 2.5d turbo.

mods so far

93 long wheel base rear spring in rear for the gain of 50mm height
lose the front and read bars for a nice 6mm steel C channel :lol:

33 seringetis on 7" rims good for airing down to 10 psi just takes a while to pump back to road prussure.

Front tersons bars are cranked up about 30mm
ball joint now just check the front height gain another 10mm

body lift 50mm

but have 1 problem

gear bos shagged lost sinkros in 2nd, 3rd, 4th
Transfer chain slipping baddly ie cant use 4x4 at all :cry:

jono

WACKO · Post by **WACKO** » Sun May 07, 2006 11:40 am

that sucks. ive got 93 soft top 3ltr v6 man
33" seringetis
raised lwb king springs
balljoint flip
removed front and rear sway bars

but my inner cv gave up and im having trouble finding a decently priced replacement now so i have no wheel drive :cry:

JTop · Post by **JTop** » Sun May 07, 2006 2:56 pm

I have a complete transfercase in good nick plus a smashed 1 which did have a good chain spare
J Top

red-devil · Post by **red-devil** » Mon May 08, 2006 6:25 pm

hello there jtop

how much for the good tranny case.

and have u any ideas on were i can find a gear box too.

were bout are u too so i can work out shipping

JTop · Post by **JTop** » Tue May 09, 2006 11:22 pm

Wgtn
you might get a better deal buying them both together somewhere.
I thought the T/F case was $300=$400. done 90ks
J Top

stinky001 · Post by **stinky001** » Wed Apr 16, 2008 8:15 pm

hi does anyone have any pics that they can show me of a ball joint flip thanks steve

cyclops · Post by **cyclops** » Fri Apr 18, 2008 12:48 am

viewtopic.php?f=18&t=2159&st=0&sk=t&sd=a&hilit=pajero#p17117
check this link out great story on mods done by NJV6

rayndeb · Post by **rayndeb** » Fri Apr 18, 2008 10:34 pm

i found this http://www.trademe.co.nz/Trade-Me-Motor ... 637060.htm

Ball Joint Flip

Ball Joint Flip

Re: Ball Joint Flip

Re: Ball Joint Flip

Re: Ball Joint Flip